• Journal of Bio-Environment Control
• /
• v.17 no.3
• /
• pp.181-187
• /
• 2008

The structural stability of a simple-typed cultivation facility with a width of 5.6 m for growing Pleurotus ostreatus was analyzed by modeling the facility as three-dimensional steel frames. The computation was done by using the finite element analysis program, ANSYS and the criterion of determining structural stability was based on the allowable stress design (ASD). The computational results showed that the structure with a straight-typed bed column was more stable than those with other types of bed columns against snow depth but there was little difference against wind velocity. As results, the interval of rafter had a more influence on safety wind velocity than that of bed column, while the interval of bed column was more important to safety snow depth. Finally the bed column against buckling was stable in all cases considered in this paper.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.4
• /
• pp.349-358
• /
• 2005

In this study, analysis of the disposal tunnel spacing and disposal pit pitch was carried out, as a factor of the design to estimate the scale and layout of the repository. To do this, based on the reference repository concept and the engineered barrier concept, several cross sections of the disposal tunnel and disposal pit were established. After then, the mechanical and thermal stabilities of the established tunnels were analyzed. Also, an optimized disposal tunnel spacing and the disposal pit pitch reducing the excavation volume was proposed. The results of these analyses can be used in the deep geological repository design. The detailed analyses by the exact site characteristics data to reduce the uncertainty of the site and the modification for the optimization are required.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.92-98
• /
• 2014

Spacer is a construction material for maintaining cover depth and steel installation, however several problems like staining, leakage, and cracking are currently issued due to performance degradation and unsatisfactory dimensional stability of spacer. Plastic composite is widely used for prevention of brittle failure in cement based material, which yields improvement of crack resistance and ductile failure. This study is for development and applicability evaluation of high strength spacer with slag cement for environmental load reduction and plastic composite like polypropylene fiber, nylon fiber, and glass fiber. For this work, unit weight of 4 different plastic fibers are evaluated through preliminary tests. Physical tests including compressive, flexural, and tensile strength and durability tests including absorption, permeability, length change, crack resistance, carbonation, and freezing and thawing are performed. Through various tests, optimum plastic fiber is selected and manufacturing system for high strength spacer with the selected fiber is developed. Dimensional stability of the developed spacer is evaluated through field applicability evaluation.

• Korean Journal of Organic Agriculture
• /
• v.24 no.4
• /
• pp.809-819
• /
• 2016

This experiment was carried out to determine the treatment interval on neem product for control of Bemisia tabaci on eggplant using eco-friendly agriculture. We have investigated the control effect of B. tabaci, growth characteristics of eggplant, economics according to neem product treatment interval on eggplant. The longer neem processing interval tended to decrease control effect on nymphs of B. tabaci. Control effect of nymph of B. tabaci according to treatment interval of 3 days, 5 days, 7 days, 10 days, and 15 days were 96.7%, 89.7%, 76.1%, 73.4%, and 51.0%, respectively. This result was the same tendency in adult of B. tabaci control effects on eggplant. Growth characteristics of eggplant according to neem the treatment interval of 3 days, 5 days, and 7 days, was less damaged on of B. tabaci. However, the 10 days, 15 days, and untreated of neem treatment intervals were badly damaged by B. tabaci. Therefore, neem treatment interval of 3~7 days for control of B. tabaci was high control effect. However, it is considered to be the most suitable to process every seven days considering the economics and so on. The results of economic analysis from income of 7 days neem treatment interval was the most high as 19.505 thousand won per 10a and the most economical treatment for control of B. tabaci.

• Journal of Biomedical Engineering Research
• /
• v.15 no.1
• /
• pp.35-40
• /
• 1994

A probe was designed to study the relationship of photon flux path and layered properties of bilogical tissue. The result shows that different wavelengths have different flux path and maximum reflectance position with separation. The source-detector separations on maximum reflectance of IR and GR were 7.5 mm and 2.5 mmm each other and layered properties of tissue can be discriminated bye the change of S-D separation using designed probe.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.8 no.1
• /
• pp.69-81
• /
• 1970

1. Four soybean varieties in pure stand and mixtures were grown in 20 competition treatments of genotypes at within-row spacings of 5, 10, 20, 40, and 80 cm and were investigated in 10 characters for different genotypes. 2. Yield, weight of 100 seeds, height, number of branches, pods per plant, and seeds per pod were highly significant for within-row spacing treatment. 3. There was no spacing treatment effect for number of nodes and days to flower. Maturity did not respond equally in four varieties for spacing effect. 4. Fruiting period was influenced by spacing treatment. Height and number of branches were increased as within-row spacings were increased. Seed yield per area was increased oppositely. 5. Difference between fertilizing and non-fertilizing treatment was not significant in this experiment. At 80 cm spacing no competition effect occurred for yield. 6. In the competition effect, Kumkang Daerip was strong competitor ani Chungbuck Back and Shelby were weak competitors. 7. The within-row spacing of uniformity in roder to increase yield per area was proved as 20 cm in this study. 8. Oil percent was increased as spacings were increased and protein percent was as spacings were decreased.

• 발명특허
• /
• v.27 no.5 s.311
• /
• pp.68-74
• /
• 2002

본 발명은 키토산으로 이루어진 무수히 많은 갯수의 박막필름이 시트 평면에 수직, 수평 또는 경사 방향으로 일정간격의 공간을 유지하면서 적충되어서 라멜라구조를 형성하고 이 박막필름들이 일정한 간격으로 가지런히 나열되어 형성된 키토산 마이크로 플레이크로 이루어진 층상 격막시트에 관한 것이다. 두께 $1\mu{m}$내지 $50\mu{m}$로 라멜라구조를 이루는 키토산 박막필름이 $1\mu{m}$내지 $10000\mu{m}$의 공기간격을 두고 누적층을 형성하고 시트평면과$0^{\circ}C$내지$180^{\circ}C$사이의 일정 각도로 균일하게 배열되어 있어 수직, 수평 또는 경사방향으로 키토산 박막필름이 가지런히 배열되어 있는 키토산으로 조성된 수용성 층상 격막시트에 관한 것이다. 본 발명은 키토산을 약산성 액상에서 용해, 숙성 시켜 추출 고화 시키는 과정에서 수직, 수평 및 경사방향으로 키토산 마이크로 플레이크가 층상 라멜라구조를 이루는 키토산 격막시트를 형성시켜 줌으로 임상의학적 적용시 각각의 키토산 박막필름 사이의 균일한 공간으로 다양한 약물의 적용이 가능하며 특히 액상의 약재를 적용시 모세관의 원리에 따라서 약물이 원활하게 공급되는 약전성이 매우 우수하고 약물의 포집성이 획기적으로 부과된 재료로 사용될 수 있으며 키토산을 용해시켜 이용하는 산업에서 물에 신속하고 완전한 용해특성을 나타내는 키토산 원료물질로 사용될 수 있는 것이다.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.189-204
• /
• 1993

산업화로 인한 급속한 경제성장과 증가하는 여성들의 사회진출은 의생활에서 보다 편 하고 간소화된 생활양식을 추구하게 되고, 이에따라 의복의 구입에 있어서도 맞춤복보다 는 시간, 경제면에서 유리한 기성복을 선호하게 되었다. 불특정다수를 위한 기성복의 생산에 있어서 개개인의 체형에 보다 적합성이 좋은 제품의 개발을 위해 다수인의 다항 목계측치에 근거한 치수체계의 설정은 무엇보다 중요한 문제가 된다. 우리나라에서는 1979년 공업진흥청에 의해 제 1차 국민표준체위조사가 실시되었으며, 1986년에는 제 2차 조사가 실시되어 그 결과를 토대로 한국 공업규격의 의류치수 규격이 제정 발표되었다. 그러나 이것은 연령에 따른 신체적 변화를 고려한 체형분류가 되어 있지 않으며, 제품 호수에 따라 동일한 간격을 둔 체계였다. 1992년에는 제 3차 국민표준체위조사가 실시 되어 그 결과가 발표되었다. 의복은 인체계측에 의한 신체 각 부위의 치수와 형태를 기초로 2차원적인 소재에 적절한 원형을 사용하여 재단, 봉제과정을 거쳐 3차원의 입체 로 구성하고 인체에 대응시킨 것이므로 기성복에 대하여 소비자의 치수적합성을 만족시 키기 위해서는 체형의 특징을 고려해야 할 것이다. 특히, 성장이 완료된 성인 여성은 출산후 중년에 접어들면서 신체적 특성이 변하여 체형이 바뀌는 경향이 있으므로 전 여성에대한 의류치수규격보다는 연령의 구분과 체형의 분류가 필요하다고 본다. 더우기 의류업체들의 판매대상의 세분화는 이를 더욱 뒷받침해주고 있다. 따라서 체형의 분류는 의복 치수 규격에 적용되어 의복의 종류에 따라 대다수의 불특정 다수 에게 보다 잘 맞는 의복 치수를 제공할 것이며, 그 치수의 정확성을 증대시키게 된다. 김성득(1991)은 소비자의 기성복에 대한 구매확률을 높이기 위해서는 규격치를 등간격 으로 하기 보다는 소비자의 분포밀도가 높은 곳일수록 규격치 간격들을 좁게 설정함으 로써 생산자 입장에서 총손실을 줄이고, 상대적 비용절감효과를 갖게할 수 있다고 하였다. 따라서 본 연구에서는 성인 여성기성복의 치수적합성을 높이기위하여 출산 후 중년에 접어 들면서 체형이 변화되는 것을 고려하여 연령을 분류하고(18세-34세, 30세-51세), 각 연령 집단에 따른 체형을 각각 3가지로 분류하였다. 이에 따라 의복 생산시의 총손실을 줄이기위한 상의, 하의생산시 필요한 부위별 최적규격치 간격을 제시하였다.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.2
• /
• pp.127-141
• /
• 2017

Jurassic granite from Geochang was analysed with respect to the characteristics of the rock cleavage. The multicriteria evaluation for the six directions of rock cleavages was performed using the microcrack spacing-related parameters derived from the enlarged photomicrographs (${\times}6.7$) of the thin section and the spacing-cumulative frequency diagrams. The results of analysis for the representative values of these spacing parameters with respect to the rock cleavage are summarized as follows. First, the analysis for deriving the main parameter indicating the order of arrangement among six diagrams was performed. The values of five parameters with respect to six directions of the rock cleavages were arranged in increasing or decreasing order for the above analysis. The decreasing order of the values of main parameter(mean spacing-median spacing, $S_{mean}-S_{median}$) and mean spacing are consistent with the order of H1, H2, G1, G2, R1 and R2 directions. These sequential arrangements of six directions of the rock cleavages can provide a basis for those of the six diagrams related to spacing. Second, the nine correlation charts between the above main parameter and various parameters were arranged in decreasing order of correlation coefficient ($R^2$). These related charts shows a high correlation of power-law function in common. The values of mean spacing, density (${\rho}$) and length of line oa are directly proportional to the value of main parameter, while the values of constant (a), exponent (${\lambda}$), spacing frequency (N), length of line oa', slope of exponential straight line (${\theta}$) and total length ($1mm{\geq}$) are inverse proportional. Third, the results of correlation analysis between the values of parameters for three planes and those for three rock cleavages are as follows. The values of frequency, total spacing, constant, exponent, slope and length of line oa' for three planes and three rock cleavages show an order of R' < G' < H' and H < G < R, respectively. On the other hand, the values of mean spacing, (mean spacing-median spacing), density and length of line oa show an order of H' < G' < R' and R < G < H, respectively. The correlation of the mutually reverse order of the values of parameters between three planes and three rock cleavages can be drawn. This type of correlation analysis is useful for discriminating three quarrying planes.

• Journal of dental hygiene science
• /
• v.14 no.3
• /
• pp.349-355
• /
• 2014

The purpose of this study was to evaluate marginal gap of fixed dental prostheses (FDPs) fabricated by soft metal material with using dental computer aided design/computer aided manufacturing (CAD/CAM) system and to compare gap of its by a conventional method. Ten same cases of study models were manufactured and scanned for digital models fabricating. Ten FDPs were fabricated by soft metal material using dental CAD/CAM (SMB group). Then, ten FDPs were fabricated by cast metal using lost wax technique and casting method (LWC group). Marginal gap was measured by silicone replica technique. Gap was measured by digital microscope (${\times}160$). Mann-Whitney test for statistical analysis was executed (${\alpha}=0.05$). The mean (standard deviations) of marginal gap was $76.5{\mu}m$ (35.2) for the SMB group, and $82.9{\mu}m$ (22.1) for the LWC group. Statistically significant differences were not found between SMB and LWC. As results, FDPs fabricated by soft metal material were clinically acceptable range.