• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.04a
• /
• pp.9-15
• /
• 2010

화재시뮬레이션을 통한 화재 해석 시 Grid의 간격은 해석의 정확도를 결정짓는 중요한 요인 중 하나이다. 일반적으로 Grid의 간격의 계산은 화재 강도에 따른 화염의 높이를 계산하여 이의 1/10크기 간격을 적용하였다. 그러나 일반적인 구조물과 달리 펠릿구조물의 경우 적층의 구조와 다공성을 가지기 때문에 기존의 산정법에 의한 계산은 실제 화재와 다른 양상으로 나타날 수 있다. 본 연구에서는 SFPE 방화공학 핸드북에서 제시된 목재펠릿의 화재강도 실험결과를 기준으로 총 3CASE의 Grid 간격 설정으로 화재해석을 실시하였으며 이를 비교 분석하였다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1999.11a
• /
• pp.427-432
• /
• 1999

지금까지 감성측정은 심박 변화율, 피부저항, 피부온도 등의 생리 신호를 측정하고 그 신호를 이용하여 비교, 분석하여 왔다. 심박 변화율, 피부저항, 피부온도와 마찬가지로 자율신경계 반응의 하나로써 맥파 또한 인간의 감성을 평가하는 한 파라미터가 될 수 있음을 예상하고 본 연구를 수행하였다. 건강한 피험자 5명을 상대로 긍정과 부정 시각 자극을 각각 주어서 심박 변화율과 맥파의 생리신호를 측정한 후 그 동안 발표되었던 심박 변화율의 결과를 기준으로 맥파의 결과와 비교, 분석하였다. 그 결과 평균 R-R 간격의 변화율과 맥파의 최고점 평균 시간 간격의 변화율 그리고 맥파의 최대 기울기점 사이의 시간 간격의 변화율이 유사함을 알 수 있었다. 또한 맥파의 Baseline Deflection 과 Amplitude를 이용하여 감성 측정을 시도하였다. 긍정 시각 자극에 비해 부정 시각 자극 일 때 맥파의 최고점 및 최대 기울기점의 평균 시간 간격은 감소하였고, Baseline Deflection은 증가하였고, Amplitude 는 감소하였다. 이는 부정시각 자극이 교감신경계를 활성화시킴을 보여 주는 것이다. 본 연구를 통하여 맥파도 자율 신경계의 반응을 대면하는 생리신호로써 감성 측정에 유용한 도구임을 검증할 수 있었다.

• Economic and Environmental Geology
• /
• v.25 no.1
• /
• pp.73-77
• /
• 1992

This paper compares numerical quadrature techniques for computing an inverse Fourier transform integral in two-dimensional resistivity modeling. The quadrature techniques using exponential and cubic spline interpolations are examined for the case of a homogeneous earth model. In both methods the integral over the interval from 0 to ${\lambda}_{min}$, where ${\lambda}_{min}$, is the minimum sampling spatial wavenumber, is calculated by approximating Fourier transformed potentials to a logarithmic function. This scheme greatly reduces the inverse Fourier transform error associated with the logarithmic discontinuity at ${\lambda}=0$. Numrical results show that, if the sampling intervals are adequate, the cubic spline interpolation method is more accurate than the exponential interpolation method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.12
• /
• pp.2655-2663
• /
• 2011

Several algorithms have been developed to detect AF which rely either on the form of P waves or the based on the time frequency domain analysis of RR variability. However, locating the P wave fiducial point is very difficult because of the low amplitude of the P wave and the corruption by noise. Also, the time frequency domain analysis of RR variability has disadvantage to get the details of irregular RR interval rhythm. In this study, we describe an atrial fibrillation detection algorithm through non-linear analysis of irregular RR interval rhythm based on the variability, randomness and complexity. We employ a new statistical techniques root mean squares of successive differences(RMSSD), turning points ratio(TPR) and sample entropy(SpEn). The detection algorithm was tested using the optimal threshold on two databases, namely the MIT-BIH Atrial Fibrillation Database and the Arrhythmia Database. We have achieved a high sensitivity(Se:94.5%), specificity(Sp:96.2%) and Se(89.8%), Sp(89.62%) respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.02a
• /
• pp.48-48
• /
• 1999

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.352-359
• /
• 2010

The objective of this paper is to study on the property transformation for materials and to evaluate the precision through marginal gap depending on heat-treatment of metal-porcelain by the gold electro-forming system. Specimens for evaluating property of hardness treat non-treat(HC), once(H1), twice(H2), and three times(H3) by heating, respectively. Specimens for marginal gap classified as each groups of special bonder(FS), special bonder, opaque(FO), special bonder, opaque, body(FB) and non-treatment(FC). As a result for micro-hardness test, the level of hardness on each groups of H1, H2, H3 decreased rather than HC group(p<0.05). In addition, marginal gap was not affected by the number of times being treated by heating. Therefore, the marginal fitness and the precision for mterials were not affected by the heat-treatment on the process to make GES metal-porcelain.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.10
• /
• pp.653-658
• /
• 2016

A study on the measurement of critical heat flux using the transient inverse heat conduction method in spray cooling was performed. The inverse heat conduction method estimates the surface heat flux or temperature using a measured interior temperature history. The effects of the measuring time interval and location of temperature measurement on the measurement of critical heat flux were primarily investigated. The following results were obtained. The estimated critical heat flux decreased as the time interval of temperature measurement increased. Meanwhile, the effect of measurement location on critical heat flux was not significant. It was also found, from the experimental results, that the critical superheat increased as the measurement location of thermocouple neared the heat transfer surface.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.1
• /
• pp.9-17
• /
• 2014

Electrical compound action potential (ECAP) can be recorded on cochlear implant. This study will investigate stimulation and recording to enhance the efficacy of ECAP. 34 articles was used. We analyzed pulse and stimulating condition, artifact suppression, recording condition. The cathod-leading biphasic pulse was used with as short as possible pulse width and inter phase gap for the efficacy of neural firing, stable threshold and preventing neural degeneration. Around C-level was stimulated to apical, middle and basal turn of cochlea. Artifact was eliminated by forward-masking, template-subtraction technique. For clearer waveform, we need to change distance between stimulating and recording electrode, the gain of amplification, number of average.

• The Journal of the Acoustical Society of Korea
• /
• v.2 no.1
• /
• pp.59-66
• /
• 1983

본 논문은 랜념배열 안테나에서 위치함수의 확률분포함수가 정규 Gaussian 분포가 되도록 사다 리 계층법과 등면적 분포법이란 새로운 방법을 제시하였고 이를 선형과 판형 배열 안테나로 설치하여 그의 방사특성을 컴퓨터에 의해 계산하고 합성한 것이다 측정된 결과를 Monte-Carlo 법에 의한 랜념배 열 안테나와 균일 간격으로 배열된 안테나에 의한 측정결과와 비교한 결과 부로부레벨은 등면적 분포법 에 의한 배열안테나에서 가장 낮았으며 소자수가 많을수록 낮아졌다. 또한 빔폭은 확률밀도함수와 operture 길이에 의존함을 알 수 있다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.201-208
• /
• 2008

Statement of problem: A new implant impression technique which use abutments as impression coping, and use resin cement as a splinting material was described. Accuracy of this technique was compared with conventional closed tray and resin splinted open tray technique for a $15^{\circ}$ angled 3-implant model Material and methods: A dental stone master model with 3 linearly positioned implant analogue and a reference framework which was passively fitted to it were fabricated. The center analogue was perpendicular to the plane of model and the outer analogues had a $15^{\circ}$angulation forward or backward. 10 closed tray impressions, 10 resin splinted open tray impressions, 10 abutment-resin framework cementation impressions and 10 abutment-metal framework cementation impressions were made with additional silicone material and poured with dental stone. A light microscope with image processing was used to record the vertical gap dimension between reference framework and analogue of duplicated cast made with each 4 impression techniques. Statistical analysis used one-way ANOVA with post-hoc tests Tukey test of .05 level of significance Results: Significant difference in the vertical gap dimension was found between closed tray technique; 74.3 (${\pm}33.4$)${\mu}m$ and resin splinted open tray technique, and two other new technique. (P<.05) Abutment-metal framework cementation technique;42.5 (${\pm}11.9$)${\mu}m$ was significantly different from resin splinted open tray technique. (P<.05) Abutmentresin framework cementation technique;51.0 (${\pm}14.1$)${\mu}m$ did not differ significantly from resin splinted open tray technique;50.3 (${\pm}16.9$)${\mu}m$. (P>.05) Conclusion: Within limitations of this study, the accuracy of implant level impressions of resin splinted open tray technique was superior to that of closed tray technique. A new technique using abutment and metal framework cementation was more accurate than resin splinted open tray technique.