• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.12
• /
• pp.1004-1012
• /
• 2014

In this study, blowoff was investigated in a ducted combustor with the bluff body when acoustic excitation was forced. To observe the flame structure, OH radical chemiluminescence was used and the image was analyzed by using POD (Proper Orthogonal Decomposition) algorithm. Natural gas mainly composed of methane was used as fuel. Blowoff occurred when the equivalence ratio was reduced. Equivalence ratio causing blowoff was measured by changing air flow rate, excitation frequency and sound pressure. Blowoff equivalence ratio was varied depending on the experimental conditions. Vortex frequency behind the bluff body and resonance effect in combustor are the main factors that affect the blowoff equivalence ratios with the excitation.

• Composites Research
• /
• v.34 no.5
• /
• pp.330-336
• /
• 2021

Alumina powder is one of the widely used materials for industry, but there is a problem that the strength of the product changes depending on the powder packing state. To solve the above problem, previous studies have been conducted to increase the particle packing efficiency, but most of the existing studies analyzed the packing characteristics of millimeter-scale particles, so the physical properties are different from those of the micrometer scale. It is difficult to apply to the micrometer scale. In this paper, a three-step experiment was performed using a statistical method to increase packing using micrometer-scale alumina powder. First, a size combination with high packing and a mixing ratio were selected using the mixture test design method, and an appropriate excitation frequency was selected by analyzing the height change according to the frequency change in the vibration test apparatus. Finally, an alumina powder packing experiment was performed based on the experimental results mentioned above. As a result, it was confirmed that the maximum height variation was 42% higher than the maximum value of the 155 measurements performed when selecting the packing size combination. It is thought that this study will serve as basic data for processing and packing research using fine powder.

• Korean Journal of Culture and Social Issue
• /
• v.16 no.3
• /
• pp.289-310
• /
• 2010

The purpose of this study was to examine how political interest, political ideologies, and information-searching goals influence the amount of information voters search, the ways in which people search for information about political candidates, and the type of information they select. The results showed that the participants under accuracy goal searched much more information and the participants under the high level of interest were not affected by conservative ideology, but the participants with the low level of interest were influenced by the liberal ideology and viewed substantially more information. And most of participants had the attribute-centered searching pattern. The social policies were accessed most, however, the information about party and personal background of a candidate were found least.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.2
• /
• pp.123-133
• /
• 2006

The main objective of this study is to develop an optimization algorithm of framed structures with rigid and various semi-rigid connections using the multilevel dynamic programming and the sequential unconstrained minimization techniques (SUMT). The second-order elastic analysis is performed for steel framed structures. The second order elastic analysis is developed based on nonlinear beam-column theory considering the bowing effect. The following semi-rigid connections are considered; double web angle, top-seat angle and top-seat angle with web angle. We considered the three connection models, such as modified exponential, polynomial and three parameter model. The total weight of the structural steel is used as the objective function in the optimization process. The dimensions of steel cross section are selected as the design variables. The design constraints consist of strength requirements for axial, shear and flexural resistance and serviceability requirements.

• Science of Emotion and Sensibility
• /
• v.13 no.3
• /
• pp.475-484
• /
• 2010

This study examined the influence of the SOA(stimulus onset asynchrony) between visual and auditory stimuli on the integration phenomenon of audio-visual senses. Within the stimulus integration phenomenon, the redundant target effect (the faster and more accurate response to the target stimulus when the target stimulus is presented with more than two modalities) and the visual dominance effect (the faster and more accurate response to a visual stimulus compared to an auditory stimulus) were examined as we composed a visual and auditory unimodal target condition and a multimodal target condition and then observed the response time and accuracy. Consequently, despite the change between visual and auditory stimuli SOA, there was no redundant target effect present. The auditory dominance effect appeared when the SOA between the two stimuli was over 100ms. Theses results imply that the redundant target effect is continuously maintained even when the SOA between two modal stimuli is altered, and also suggests that the behavioral results of superior information processing can only be deducted when the time difference between the onset of the auditory stimuli and the visual stimuli is approximately over 100ms.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.132-141
• /
• 1992

The critical condition for onset of Benard convection with variable viscosity .nu.=.nu.$_{0}$exp(-CT) has been obtained using a linear stability theory. The bottom wall is rigid while the upper surface may be either free or rigid. The two boundaries are subject to convective heat transfer. The critical Rayleigh numbers are presented up to maximum viscosity ratio of 3000. It is greater for smaller upper and/or lower surface Biot numbers. Its dependence on the viscosity ratio is complicated. However, a simple sublayer theory is found to be applicable for extremely large viscosity ratio. In such cases, the critical Rayleigh number and the critical wave number are functions of viscosity ratio and lower surface Biot number.r.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.2
• /
• pp.175-179
• /
• 2003

Convergence condition determines performance of iterative learning control (ILC), for example, convergence speed, remaining error, etc. Hence, the performance can be elevated and a feasible set of learning controllers grows if a less conservative condition is obtained. In the frequency domain, the $H_{\infty}$ norm of the transfer function between consecutive errors has been currently used to test convergence of a learning system. However, even if the convergence condition based on the $H_{\infty}$ norm has a clear property about monotonic convergence, it has a few drawbacks, especially in MIMO plants. In this paper, the relation between the condition and the monotonicity of convergence is clarified and a modified convergence condition is found out using a frequency domain Lyapunov equation, which supersedes the conventional one in the frequency domain.

• The Korean Journal of Elementary Counseling
• /
• v.11 no.3
• /
• pp.407-426
• /
• 2012

This study tried to reveal the relation among the necessary and sufficient conditions of human relation, which is the core concept of human-centered counseling. The relation of these three conditions are quite different according to what we take as the main content of authenticity. If we take congruence as its content, as Rogers did in his early academic years, three conditions are equal in their importance as instruments which counselor can use. But, if we take presence as its content, as Rogers did in his later academic years, authenticity possesses central position while using empathy and unconditional positive regard as its instruments. In this relation, we can say authenticity is a continuous growing process of self realization. And it also can be sad that the three necessary and sufficient conditions compose productive counseling relation inviting both counselor and client to the self realizing process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.431-432
• /
• 2008

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1271-1281
• /
• 2000

본 논문에서는 모드 매칭법과 일반 산란계수법을 이용하여 경사진 금속봉이 도파란내에 놓여 있을 때 반사 특성과 투과 특성을 구하였으면, 이 결과를 이용하여 동축선로와 도파관과의 접합에 응용할 수 있도록 최적의 조건을 도출하였다. 여기서 반사특성은 기울기사 클수록 뚜렷아세 개선되어서 최소-40dB까지 감소하였고, 투과특성은 최적의 각도 45$^{\circ}$에서 최대의 특성을 얻을 수 있었다. 또한, 이를 HFSS의 결과와 비교하였을 때 잘일치하는 결과를 얻을 수 있었다.