• Computational Structural Engineering
• /
• v.8 no.1
• /
• pp.147-160
• /
• 1995

Based on the weighted residual concept[4], a three-dimensional plate theory is derived using a Fourier series expansion of a dependent variable and a weighted residual approximation of the basic elasticity equations. The weighted residual equilibrium equations of the plate are expressed in terms of weighted displaced quantities, and the results are then interpreted by means of a potential energy functional. The potential energy expression is used to develop a finite element implementation. For illustrative purposes, the application of the theory to a strip plate is considered and two numerical examples of a cantilever and a simply-supported strip plate are studied.

• Journal of Broadcast Engineering
• /
• v.20 no.5
• /
• pp.782-785
• /
• 2015

In this paper, we propose a novel residual differential pulse-code modulation (RDPCM) coding technique to improve coding efficiency of screen content videos. The proposed method uses a weighted combination of adjacent residues to provide an accurate estimate in RDPCM. The weights are trained in previously coded samples by using an L1 optimization problem with the least absolute shrinkage and selection operation (LASSO). The proposed method achieves BD-rate saving about 3.1% in all-intra coding.

• Survey Research
• /
• v.5 no.2
• /
• pp.49-70
• /
• 2004

This paper is a broad review about general regression estimators, which are very useful when auxiliary variables are available in survey sampling. We investigate the process of development of general regression estimators from birth to suggestion of variance estimation method and examine some properties of general regression estimators by comparing with calibration and QR estimators. We also present some forms of general regression estimators available under complex sampling designs such as stratified sampling and cluster sampling. Finally, we comment some advantages as well as disadvantages of general regression estimators and theoretical and practical development in the future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1987.07a
• /
• pp.201-214
• /
• 1987

하천에서 종, 횡방향이 고려된 확산-이송 현상을 수치기법인 유한요소법을 이용하여 2차원으로 해석하였다. 유한요소법으로는 Galerkin의 가중잔차 방법을 수십에 대해 적분을 취한 연속, 운동량 및 확산-이송방정식에 적용하였고, 선형보간함수와 선형삼각형요소가 이용되었다. 모형의 타당성을 입증하기 위해 단순화된 1차원 수로에서 수차례 검정한 결과 정확해와 거의 일치하는 만족할만한 결과가 도출되었다. 개발된 모형의 실험이 2차원수로에서 행하여져 지류의 유입에 따른 확산-이송현상이 모의되었으며, 실험적용은 개발사업후의 한강본류 9km 구간에 적용되어 탄천과 중량천의 지천 영향을 받는 오염 농도가 2차원적으로 도시되었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.373-374
• /
• 2016

Residual Differnetial pulse-code Modulation (RDPCM) 기법은 비디오의 압축을 위한 시간 및 공간 예측 후 남은 잔여신호를 인접 화소를 이용하여 추가적인 중복정보를 제거하는 기법을 의미한다. 본 논문에서는 우선 잔차 신호의 예측을 위하여 인접 화소 사이 선형 가중 합으로 예측 모델을 세우고, 각 가중치를 $L_1$ 정규화를 포함하는 비용함수를 통해 추정함으로써 보다 효율적인 부호화 성능을 제공하는 알고리즘을 제안한다.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.1
• /
• pp.141-150
• /
• 2015

Graphical paradigms for assessing the adequacy of models in logistic regression are discussed. The residual plot has been widely used as a graphical tool for evaluating the adequacy of the model. However, this approach works well only for linear models with constant variance, and the alternative approach, the marginal model plot, has its defects as well. We suggest a Chi-residual plot that overcomes the potential shortcomings of the marginal model plot.

• Management & Information Systems Review
• /
• v.37 no.3
• /
• pp.27-47
• /
• 2018

In this study, we examine how land use zoning affects the land price controlling other variables such as road-facing condition of the land, land form, land age after its development and land size. We employ geographically weighted regression analysis which reflects spatial dependency as methodology with a data sample of land transaction price data of Jangyu, a new town, in Korea. The results of our empirical analysis show that the respective coefficients of traditional regression and geographically weighted regression are not significantly different. However, after calculating Moran's Index with residuals of both OLS and GWR models, we find that Moran's Index of GWR decreases around 26% compared to that of OLS model, thus improving the problem of spatial autoregression of residuals considerably. Unlike our expectation, though, in both traditional regression and geographically weighted regression where residential exclusive area is used as a reference variable, the dummy variable of the residential land for both housing and shops shows a negative sign. This may be because the residential land for both housing and shops is usually located in the level area while the residential exclusive area is located at the foot of a mountain or on a gentle hill where the residents can have good quality air and scenery. Although the utility of the residential land for both housing and shops is higher than its counterpart's since it has higher floor area ratio, amenity which can be explained as high quality of air and scenery in this study seems to have higher impact in purchase of land for housing. On the other hand, land for neighbourhood living facility seems to be valued higher than any other land zonings used in this research since it has much higher floor area ratio than the two land zonings above and can have a building with up to 5 stories constructed on it. With regard to road-facing condition, land buyers seem to prefer land which faces a medium-width road as expected. Land facing a wide-width road may have some disadvantage in that it can be exposed to noise and exhaust gas from cars and that entrance may not be easy due to the high speed traffic of the road. In contrast, land facing a narrow road can be free of noise or fume from cars and have privacy protected while it has some inconvenience in that entrance may be blocked by cars parked in both sides of the narrow road. Finally, land age variable shows a negative sign, which means that the price of land declines over time. This may be because decline of the land price of Jangyu was bigger than that of other regions in Gimhae where Jangyu, a new town, also belong, during the global financial crisis of 2008.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1822-1829
• /
• 2006

본 연구에서는 계산된 유량과 실측 유량을 비교하여 Clark 단위도 방법의 매개변수를 추정하고자 하였다. 오산천과 진위천 상류유역에 대하여 Arcview와 WMS로 지형자료에 대한 전 처리를 한후, HEC-HMS 프로그램을 이용하여 유출량을 산정하였다. 2001년부터 2005년까지 4개의 사상에 대하여 강우량, 기흥저수지와 이동저수지의 실제 방류량을 이용하여 유출량을 산정하였으며, Clark 모형의 매개변수를 Russel 공식, Sabol 공식 및 HEC-HMS 프로그램에 내장된 Nelder-Mead 최적화 방법을 이용하여 매개변수를 각각 산정하여 회화 지점의 실측 유출량과 비교.평가하였다. 빈도가 큰 유출사상의 경우에는 Sabol 식을 적용한 결과가 Russel 식을 적용한 모의결과보다 첨두유량의 재현성이 우수하게 나타났으며, 유출량이 작은 경우에는 Russel 식을 적용한 모의결과가 우수하였다. 첨두가 중제곱평균제곱근오차, 잔차자승의 합, 절대잔차의 합 등 3가지의 서로다른 목적함수를 적용하여 매개변수를 자동 보정하였을 때, 목적함수에 따른 첨두유량의 오차는 거의 동일하였으며, 첨두시간에 대한 오차는 첨두가중제곱평균제곱근오차를 적용했을 때 가장 작은 것으로 분석되었다. 그리고 Clark 유역 추적모형의 자동보정을 통하여 추정한 매개변수인 도달시간과 저류상수는 강우사상에 따라서 변동하는 특성을 나타내기 때문에 최적의 도달시간 및 저류상수는 홍수사상별로 추정되어야 하며 이 결과는 홍수량 산정을 위한 매개변수 추정과정의 비유일성 및 복잡성을 암시하고 있다.

• The Korean Journal of Applied Statistics
• /
• v.29 no.7
• /
• pp.1155-1163
• /
• 2016

This paper deals with an estimation procedure of variance components in a mixed effects model by projections. Projections are used to obtain sums of squares instead of using reductions in sums of squares due to fitting both the assumed model and sub-models in the fitting constants method. A projection matrix can be obtained for the residual model at each step by a stepwise procedure to test the hypotheses. A weighted least squares method is used for the estimation of fixed effects. Satterthwaite's approximation is done for the confidence intervals for variance components.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.2
• /
• pp.181-186
• /
• 1992

The scattering property of TMz illuminated perfectly conducting and dielectric cylinders of arbitrary cross section are analyzed by the boundary element techniques. The boundary element equations are formulated via Maxwell’s equations, weighted residual or Green’s theorem, and the boundary conditions. The unknown surface fields on the boundaries are then calculated by the boundary element integral equations. Once the surface fields are found, the scattered fields in from a perfectly conducting circular and elliptic cylinders, a dielectric circular and elliptic cylinders are numerically analyzed. A general computer program has been developed using the quadratic elements(higher order boundary elements) and the Gaussian quadrature.