• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.31-33
• /
• 2008

전력계통에서 고장과 같은 어떤 원인에 의한 전계통 정전 또는 광역정전이 발생하였을 경우, 빠른 시간 내에 다시 전력을 공급하기 위한 조치를 취해야 한다. 그러나 계통의 구성 형태, 부하 조건, 발전기의 종류 등에 의해 계통 복구시 부하 투입에 의한 발전기 응동, 송전선로 가압시 선로 충전용량에 의한 과도현상 등 다양한 형태의 과도현상이 발생한다. 따라서 본 논문에서는 국내의 시송전 계통에서의 복구절차 수행시 송전선로를 가압할 때 발생하는 과도현상을 분석하였다. EMTP를 사용하여 시송전 계통을 모델링하였으며, 다양한 Sh.R 용량에 따른 과전압을 분석 하였다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.05a
• /
• pp.88-93
• /
• 2003

IC 패키지 기술중 Underfilling 은 칩과 기판사이에 Encapsulant의 표면장력을 이용하여 주입하고 경화시킴으로써 전기적 기계적 보강력을 제공하는 기술로서 시스템 칩의 발전과 함께 차세대 패키징 기술중의 하나이다. 본 연구에서는 기존의 Underfilling 공정을 개선하여 충전시간을 획기적으로 줄일 수 있는 가압식 Underfilling 공정을 이용하여 차세대 반도체 패키징에 적용할 수 있는 가능성을 파악하였다. 이를 위하여 칩과 기판사이에 주입되고 경화되는 Encapsulant의 유동특성을 파악하였다. 가압식 Underfilling기술은 아직까지 상용화되지 않은 미래기술로써 효율적인 몰드 설계를 위하여 Encapsulant 종류에 따라 Gate 위치, Bump Pattern 및 개수, 칩과 기판 사이의 거리, Side Region에 따른 유동특성등의 파악이 중요하다. 본 연구에서는 $DEXTER^{TM}(US)$의 Encapsulant FP4511 을 사용하여 Cavity 내에 Void 를 없앨 수 있는 주입조건을 찾아내고 Underfilling 시간을 감소시킬 수 있는 모사를 진행하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.3
• /
• pp.415-423
• /
• 1996

Hydrogen reduction technique was used to form the nickel layer onto alumina powders in nickel sulfate solutions. The reduction rate and precipitation states of nickel ions were investigated at various experimental conditions such as hydrogen pressure, temperature, $PdCl_{2}$ addition, particle size, and so on. Uniformly nickel coated alumina composite powders were obtained at such condition as reduction temperature of $165^{\circ}C$, hydrogen pressure of 300 psi, and $PdCl_{2}$ amount of $2\;mg/\ell$.

• Resources Recycling
• /
• v.16 no.3 s.77
• /
• pp.44-49
• /
• 2007

In the present work, the high temperature oxygen pressure leaching behavior of chalcopyrite was studied in sulfuric acid solution. The influence of leaching time, temperature and oxygen partial pressure on leaching process were examined. Leaching rate of copper increased significantly with increasing leaching temperature. Copper recovery reached 87.1% within 2 hours at $200^{\circ}C$ and 10 atm oxygen pressure, while most of the solubilized iron readily re-precipitates as hematite($Fe_2O_3$). It was confirmed that e main leach reaction of chalcopyrite occurred through oxidation with oxygen under oxygen pressure and high temperature(above $150^{\circ}C$). Because sulfur was oxidized entirely to sulfate, passivating elemental sulfur layer was not formed.

• Plant Journal
• /
• v.9 no.2
• /
• pp.42-45
• /
• 2013

The worldwide issue of greenhouse gas reduction has recently drawn great attention to carbon capture and storage(CCS). In this study, we developed a 10,000 ton/year pilot injection plant for geological storage of carbon dioxide. Major components of the pilot plant include a pressure pump, a booster pump, and an inline heater to bring liquid carbon dioxide into its supercritical state. The test results show that the pilot plant readily achieves the injection pressure and temperature, showing satisfactory control performance. The overall power consumption is 2,000 ~ 2,500 W, more than 75% of which consumed by the pressure pump. This study will facilitate varied research on greenhouse gas reduction as the only domestically developed system for geological injection.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.10a
• /
• pp.312.2-312.2
• /
• 2003

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.468-473
• /
• 2016

The aim of this study was to measure the opening force of an access door of a pressurized smoke control zone and verify the reliability of the opening force. For the access door opening force, the opening load of the access door was measured before and after pressurized air had entered the smoke control zone. The reliability of the measured values was verified using the Anderson Darling's statistical analysis method of the Minitab Program. Because the analyzed P values were greater than 0.05 except for some floors before and after the operation of the smoke control equipment, the opening force was found to have 95% reliability. The normal distribution of the measured values showed no relationship with the operation of the smoke control equipment and the precision of the force gauge was believed to be reliable. The major factors for the optimal design of the pressurized smoke control equipment include the precision and reliability of the force gauge, the correct posture of the measuring person, and the same conditions for access doors. Therefore, a digital force gauge is believed to be suitable for measuring the opening force of the access door of a pressurized smoke control zone. In addition, standardization of the posture of a measuring person, the setup of the initial opening force of an access door, etc., are major variables for effective measurements of the door opening force of an access door.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.26-32
• /
• 2020

In this study, a facility was constructed to supply liquid nitrogen to simulate combustion instability in a liquid rocket combustor. The pressurization and supply performances were predicted and verified through different experiments. The liquid nitrogen supply system was composed of a pressurized supply system, and a dome regulator was used to adjust the pressure of the pressurant. A cavitation venturi was used to control the mass flow rate of liquid nitrogen. The condition of liquid nitrogen supply was a mass flow rate of 2.55 kg/s and the venturi inlet pressure was above 100 bar. Based on the initial experiment, it was observed that the predicted amount of the pressurant was not sufficiently supplied and the target pressure was not supplied due to a drop in tank pressure. Through the modification of the established facilities, the target mass flow rate was successfully supplied and the cryogenic liquid nitrogen supply facility was verified.

• Fire Science and Engineering
• /
• v.27 no.5
• /
• pp.26-31
• /
• 2013

In nuclear power plant, anchor bolts for pressurizer supports are sufficiently used in terms of safety reason, but field inspections have reported that some bolts exceed the limit of their allowable hardness. Because the high level of hardness may lead to failures due to the stress corrosion or fracture toughness, a regular inspection is required for the bolts in nuclear power plant. Thus, this research measures the hardness of bolts currently used in pressurizer supports and then estimates maximum allowable stresses preventing failures by stress corrosion and fracture toughness. Using the ANSYS program, the stresses of the bolts in the regular condition and accidental condition have been calculated, and the possible maximum stress has been compared with the estimated allowable stresses. From the results, the stresses of bolts in the accidental condition satisfy the allowable safety stress from the stress corrosion failure. However, in the future, it shall be needed to consider the reflection of the structure assembling method on the assembling procedure to ensure the pressurizer integrity during maintenance period time.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.3
• /
• pp.99-111
• /
• 1999

The frictional capacity of auger-cast piles is often very small because of the disturbance of the soil surrounding the pile during the excavation process. Usage of expansive agents and a pressurized injection technique for auger-cast piles should improve the frictional resistance between pile and soil. This paper presents the test results of auger-cast model piles installed with expansive mortar in laboratory compacted weathered soil. The model piles were installed in a calibration chamber with a variation in the amount of expansive agent, the injection process and the chamber pressure. It was observed that the pile shaft resistance increases with the increased amount of expansive agent, and also increases when mortar is pressure injected. The shaft resistance increased up to 24% for the pile installed only with expansive mortar and increased up to 56% for the pile installed with the pressurized injection of expansive mortar, compared with that of piles with plain mortar.