• The Korean Journal of Food And Nutrition
• /
• v.15 no.4
• /
• pp.295-299
• /
• 2002

The esterification of alcohols with acetic acid, lactic acid and citric acid was carried out in batch during the second distillation. Effect of various parameters, e.g. pH of reactant base spirit, temperature of distillation, time of distillation were studied. The parameter of distillation temperature was modified by atmospheric distillation and pressure distillation. The pressure(1.9 atm.) distillation was used in order to react and distill at high temperature. Compared with the base spirit concentration, ethyl acetate, ethyl lactate and iso-amyl acetate in esterification distillate increased by 2,890%, 6,410% and 52%, respectively. Major factors of the esterification with organic acids in distilled spirit making were molecular weight of the organic acid and pH of reactant base spirit.

• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.858-864
• /
• 1990

In an attempt to establish efficient extraction conditions of beef extract by hot water extraction, effects of extraction time, temperature and amount of added water were investigated. Beef extract was prepared with three different extraction conditions and quality parameters for optimization of extraction condition were content of total nitrogen, non protein nitrogen and collagen in terms of extractability. As a result, in order to produce beef extract from beef by hot water extraction, it was efficient to extract at $97^{\circ}C$ for 75 minutes with the addition of 2.5 times water. Proper extraction condition under pressure was at $125^{\circ}C$ for 30 minutes with the addition of 2 times water.

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.2
• /
• pp.85-89
• /
• 2006

To research of the improved mechanical properties of materials for spectacle lens cutting, SiC and TiC were used as the main powder. Also, $Al_2O_3$ and $Y_2O_3$ was included as a sintering additive. The weight ratio of the alumina($Al_2O_3$) to yttria($Y_2O_3$) was set to 1:1. The materials for spectacle lens cutting were fabricated by hot-pressing at $1810^{\circ}C$ for 1h and subsequently annealed at $1860^{\circ}C$ for 3, 6 and 12h to initiated grain growth. The longer annealing time is, the bigger the grain size is. The microstructures were observed by scanning electron microscopy (SEM). The SEM images were quantitatively analyzed by image analysis (Image-Pro Plus, Media Cybernetics, Maryland, U.S.A.). Crack deflection by elongated SiC grains was most frequently observed as the dominant toughening mechanism. Crack deflection was generally observed for elongated SiC grains with aspect ratio(AR) > 2.5 and grain thickness < $2.3{\mu}m$. Crack bridging was also observed as one of the operating toughness mechanism.

• Nuclear Engineering and Technology
• /
• v.28 no.2
• /
• pp.137-149
• /
• 1996

The present study is to analyze an integral test, BETHSY test 6.9c, which represent loss of RURS accident under mid-loop operation. Both the pressurizer manway and the steam generator outlet plenum manway are opened as vent paths in order to prevent the system from pressurization by removing the steam generated in the core. The main purposes are to gain insights into the physical phenomena and identify sensitive parameters. Assessment of capability of CATHARE2 prediction can be established the effective recovery procedures using the code in an actual plant. Most of important physical phenomena in the experiment could be predicted by the CATHARE2 code. The peak pressure in the upper plenum is predicted higher than experimental value by 7 kPa since the differential pressure between the pressurizer and the surge line is overestimated. The timing of core uncovery is delayed by 500 seconds mainly due to discrepancy in the core void distribution. It is demonstrated that openings of the pressurizer manwey and the steam generator manway can prevent the core uncovery using only gravity feed injection. Although some disagreements are found in the detailed phenomena, the code prediction is considered reasonable for the overall system behaviors.

• Korean Journal of Food Science and Technology
• /
• v.44 no.6
• /
• pp.692-698
• /
• 2012

The chemical conversion pattern of salvianolic acid B (Sal B) in aqueous solution under different boiling conditions was compared. When the duration of boiling was varied, without varying temperature or pressure, the content of chemically converted compounds (CCCs) was mostly increased over time. In addition, under different conditions of temperature and pressure with the same boiling time, the content of a few compounds increased with increasing temperature and pressure. These results confirmed that high temperatures and pressures in boiling alter the final composition of CCCs of Sal B. Therefore, it was suggested that the boiling conditions (time, temperature, and pressure) may be responsible for alteration of biological activities of the compounds. Our investigation of the chemical conversion of compounds contained in foods and medicinal herbs may provide important information in clarifying the biological activity of Sal B containing foods and medicinal herbs.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.222-222
• /
• 2003

나노크기 금속입자가 분산된 세라믹 나노복합재료는 향상된 기계적 특성과 함께 독특한 전기적, 자기적 특성을 보여주어 새로운 기능성 재료로의 응용가능성을 갖고 있다. 그러나 소결 중의 반응이나 입자성장 등으로 형성된 반응상 또는 조대한 입자상이 세라믹 기지의 입계 등에 존재한다면, 나노크기 금속상 분산에 의한 기계적 특성의 향상과 독특한 기능성 부여라는 장점들이 없어지게 된다. 따라서 요구되는 특성을 구현할 수 있는 금속분산 나노복합재료의 제조를 위해서는 미세조직 제어를 위한 최적의 제조공정 확립과 미세조직과 특성 등의 관계에 대한 연구가 요구된다. 본 연구에서는 기지상으로 A1$_2$O$_3$를, 분산상으로는 저융점 금속이며 일반적인 A1$_2$O$_3$의 가압소결시에 (약 140$0^{\circ}C$) 액상으로 존재하는 금속 Cu를 선택하여 조성이 5 vol% Cu가 되도록 복합재료를 제조하였다. $Al_2$O$_3$와 CuO 원료분말들은 습식 및 건식 볼 밀링을 통하여 균일한 분말혼합체로 제조되었다. 혼합분말은 열간가압소결기 내에 장입한 후 35$0^{\circ}C$에서 30분 동안 H$_2$가스를 흘려주며 CuO를 Cu로 환원 처리하였다. 계속해서 H$_2$분위기를 유지하며 승온한 후, 각각 1000-145$0^{\circ}C$에서 분위기를 Ar 으로 치환하였다. 소결은 145$0^{\circ}C$에서 30 ㎫의 압력으로 1시간동안 행하였다 소결한 시편들은 직사각형 형태로 가공하였으며 표면은 0.5$\mu\textrm{m}$의 다이아몬드 입자로 연마하였다. XRD, SEM 및 TEM을 이용하여 상분석 및 미세조직관찰을 행하였다. 파괴강도는 3중점 굽힘 법으로 (3-point bending test) 측정하였다. 이때 시편 하부의 지지 점간의 거리는 30mm, cross-head 속도는 0.5 mm/min으로 하였고 5개의 시편을 측정하여 평균값을 구하였다.

• Analytical Science and Technology
• /
• v.15 no.1
• /
• pp.15-19
• /
• 2002

The pretreatment of tungsten added $BaTiO_x$ ceramics was performed to improve the recovery of Ba, Ti and W. $BaTiO_x$ ceramics were digested with HF : HCl ( 1 : 2 ) mixture in an acid digestion bomb at $220^{\circ}C$ for 3 hrs. The concentration of Ba, Ti and W were determined by ICP-AES. Recoveries of Ba, Ti and W were 99.6%, 99.8% and 99.2%, respectively. And their C.V. values were 1.02%, 0.73% and 1.79%. Using this method, the analytical results of Ba, Ti and W for a real sample were obainted to be 25.9% (w/w), 38.8% (w/w) and 3.31% (w/w), respectively.

• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.409-417
• /
• 2009

In this study, autogenous crack healing and artificial crack healing using electrochemical electro deposition method were conducted to compare in the aspects of corrosion monitoring. Furthermore, the analysis of impressed voltage characteristics, galvanic current and linear polarization resistance comparison, and photo image processing technique were performed for quantitative comparisons of healing ratio. As a result, it was found that, in view of impressed voltage of artificial crack healing, the measured voltage was increased as time goes by. From the galvanic test results of artificial crack healing, the current vs. potential distribution value were formed widely in comparison with autogenous crack healing. In this point, it was shown that artificial crack healing has more eleatic resistance capacity than autogenous crack healing technique. Finally, it was found that artificial crack healing was 1.63 times higher than autogenous healing in view of crack healing ratio.

• Composites Research
• /
• v.29 no.2
• /
• pp.60-65
• /
• 2016

In this paper, finite element analysis and real time monitoring experimental work using FBG sensor were carried out for analyzing structural integrity of a Type IV hydrogen pressure vessel under impact loading condition. By using finite element analysis with the ply based modeling technique, sensor insertion points and pressure condition were suggested. Tensile test with an angle ply specimen was conducted for getting the reliability of FBG sensor insertion method. After fabricating the vessel, total five times pressurization fatigue tests were conducted (Non-impact pressurization: 1, After impact pressurization: 4). Experimental results revealed that filling cycle time was gradually increased and filling gradient was decreased when the vessel experienced impact.

• Food Science and Preservation
• /
• v.12 no.2
• /
• pp.130-134
• /
• 2005

This study was conducted to investigate the effects of pretreatment and extraction methods on the water extraction yields of sugar, protein and phenolic compounds, and the antioxidative activity of extract from Ganoderma lucidum. The herb was ground, sifted, and treated for 10 min with microwave (2,450 MHz) and ultrasound (20 kHz), and then extracted by boiling underatmospheric pressure and pressured boiling. Particle size $(0.8\~2.4\;mm)$, extraction time (2 hr) and solvent/solid ratio (20:1) were selected as optimal conditions for extraction.. Microwave and ultrasound treatment increased the extraction yields of total sugar, protein and phenolic compounds and the radical scavenging activity of extract. In comparison with microwave treatment and ultrasound treatment, microwave treatment was more effective than that of ultrasound treatment. The yields of all three compounds and the radical scavenging activity of extract were higher in pressured boiling extraction than in boiling underatmospheric pressure. The results showed that microwave radiation and sonication prior to extraction, and pressured extraction could be utilized for improving the extraction efficiency of G. lucidum.