• YAKHAK HOEJI
• /
• v.47 no.3
• /
• pp.142-147
• /
• 2003

Gas chromatography-mass spectrometric (GC-MS) procedure is presented for the simultaneous qualification and quantitation of methamphetamine (MA), amphetamine (AMP), 3,4-methylenedioxymethamphetamine (MDMA), 3,4-methylenedioxyamphetamine (MDA), and 3,4-methylenedioxyethylamphetamine (MDEA) in human hair. The method procedure involves decontamination of hair with distilled water and acetone, acidic hydrolysis, extraction in the presence of deuterated internal standards, and GC-MS analysis after derivatization with trifluoroacetic anhydride (TFAA) in ethylacetate. The limit of detection for 5 drugs were about 0.1∼0.15 ng/mg using 30 mg hair sample. Coefficient variations of correlation ranged from 0.9941 to 0.9993. The recoveries of these drugs were found to be 93.4∼104.4％. The concentrations of AMP, MA, MDA, and MDMA in abusers' hair samples were measured 0.17∼2.88, 2.09∼18.34, 0.24∼3.83, and 3.10∼22.81 ng/mg, respectively. The ratios of MA/AMP and MDMA/MDA ranged 5.67∼49.57 and 4.78∼54.31, respectively. This assay has been successfully utilized in the evaluation of the deposition of amphetamine-type stimulants (ATS) in human hair.

• Journal of the Korean Chemical Society
• /
• v.25 no.1
• /
• pp.30-37
• /
• 1981

A simple micro-sampling system is described which facilitates isolation and concentration of complex organic constituents into three fractions of different volatilities. The method involves the headspace trapping of very volatile components from a complex matrix onto a porous polymer, Tenax GC, followed by the solvent elution of the matrix and the subsequent fractions of the eluate into volatile and less-volatile fractions. The headspace and the volatile fractions are then analyzed by high-resolution capillary gas chromatography. The less-volatile fraction is analyzed by high-performance liquid chromatography. Experimental details and the results obtained using tobacco leaves as a complex organic matrix are presented.

• Journal of Environmental Science International
• /
• v.11 no.4
• /
• pp.367-373
• /
• 2002

The polycyclic aromatic hydrocarbons(PAHs) content in sewage sludge was determined by gas chromatography linked to ion trap mass spectrometry(GC/ITMS) with five deuterated PAHs as internal standards. The minimum detection limit was from 1.66 to 7.14 pg for individual PAH by GC/ITMS. For determining total PAHs(∑PAH) in sewage sludge 84 samples from 74 waste water treatment plants in whole country were analyzed. The average content of ∑PAH far whole samples was 3,289$\pm$3,098 $\mu\textrm{g}$/kg, and ranged from 142 to maximum 20,102 $\mu\textrm{g}$/kg. According to the number of population of the city, the areas were classified as five regions, ie. big, large, middle, small, and rural area in which the waste water treated plants were grown. The contents of PAHs were 4,689$\pm$5,503, 5,839$\pm$6,401, 3,725$\pm$2,053, 2,237$\pm$2,069, and 2,475$\pm$1,489 $\mu\textrm{g}$/kg, in big, large, middle, small, and rural area, respectively.

• YAKHAK HOEJI
• /
• v.41 no.6
• /
• pp.698-703
• /
• 1997

Recently, l-deprenyl (selegiline), a relative new antiparkinson`s drug, has been marketed in Korea. As its metabolites, l-methamphetamine and l-amphetamine, are the enantiomers of illicit drugs,d-methamphetamine and d-amphetamine, a method for analysis of enantiomers of methamphetamine and amphetamine in rat urine was investigated. The optical isomers of methamphetamine and amphetamine were analyzed with the chiral derivatizing reagent (S)-(-)-N-(trifluoroacetyl)-prolyl chloride (l-TFP), which was used to form the diastereomers of methamphetamine and amphetamine. And all diastereomers (l-TFP -l-AM, lTFP-d-AM, l-TFP-l-MA & l-TFP-d-MA) were well resolved by capillary gas chromatography. After administration of 10mg/kg l-deprenyl to rat, l-methamphetamine and l-amphetamine were detected without autoracemization to the d form in all urine samples collected during 24hrs, and the ratios of l-amphetamine/l-methamphetamine were 1.1~3.3. l-Amphetamine was detected in only 3 out of 8 urine samples collected during 24~48hrs where as no l-methamphetamine was detected in all cases.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.2
• /
• pp.282-288
• /
• 2014

In this research, we investigated synthetic method of 2,6-DANT that can be used as a chain extender of urethane/urea and epoxy materials in a demilitarization method via chemical transformations considering environmental, economical aspects and stability of process. We was able to identify through GC monitoring that 2,4-DANT and 2,6-DANT were produced when we inject 'hydrazine monohydrate 3.3 eq. by TNT 1 eq.' with a fine metering pump for 30 minutes and then, reflux for an additional 2 hours. We was able to isolate only 2,6-DANT(99.3% purity and 45.0% yield) from mixture of 2,4-DANT and 2,6-DANT through the separating and refining methods using 2,6-DANT solubility in methanol and crystallinity of 2,6-DANT.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.10
• /
• pp.1-7
• /
• 2020

In this study, a multichannel gas-liquid microextraction system is designed by integrating the automatic elution of extraction line and multichannel gas-purging liquid phase microextraction. The system uses an injection pump and inert gas to push the extraction solvent to a sample bottle of a gas-phase color autosampler and then implements multichannel gas-liquid microextraction and gas chromatography-mass spectrometry. The system also employs a three-way integrated micro-high-temperature heater, syringe pump, and microflow controller to realize the simultaneous processing of multiple groups of samples, thus improving the sample pretreatment speed and reproducibility and reducing human error. Autoinjection experiments were implemented with polycyclic aromatic hydrocarbon standard samples. The experiments show that the average recovery rate of the system exceeds 70%, and the relative standard among the channels is less than 15%.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.191-194
• /
• 2002

토양증기추출(Soil Vapor Extraction)법을 이용하여 대표적 휘발성 NAPL (Non-aqueous phase liquid)인 TCE (trichloroethylene)와 toluene을 토양으로부터 제거하는 칼럼 실험을 실시하였다. 토양특성 및 증기추출 조건들이 정화효율에 미치는 영향을 규명하는데, 균질한 Ottawa sand와 실제 오염지역의 토양들을 직경 2.5cm, 길이 30cm인 유리 칼럼이 충진시켰으며, 빨갛게 염색된 TCE 또는 toluene 4 g이 주입되었다 공기 유량계를 설치하여 0.03L/min의 일정한 속도로 공기가 주입되도록 하고, 퍼지장치를 설치하여 주입 공기의 습윤도를 99% 이상으로 유지하였다. 가스크로마토그래피로 유출 가스 농도를 분석하였다. Ottawa sand로 충진된 칼럼실험에서는 매질의 입자크기, 함수율, 토양 내 오염물 체류시간 등을 변화시켜 실험을 반복하였다. TCE로 오염된 세립질 Ottawa sand 칼럼실험에서 유출 공기의 최대 농도는 조립질 Ottawa sand 칼럼의 유출 농도보다 약 20% 정도 감소하였고, 오염지역의 실제토양 칼럼실험에서는 최대유출농도가 조립질 Ottawa sand 칼럼의 농도보다 약 50% 감소하였으나, 20 liter공기 주입 후부터는 모두 비슷한 농도감소 현상을 나타내었으며, 초기 주입량의 90 % 이상이 제거되었다. 함수율증가에 따른 유출공기의 농도 감소는 거의 나타나지 않았으며, TCE 주입 후 7일 동안 방치하였다가 SVE를 실시한 칼럼 실험에서도 잔류하는 TCE의 양이 약간 증가하였지만 20 liter 공기 추출 후에는 초기 주입량의 90% 가, 40 liter공기 추출 후에는 98% 이상이 제거되었다. Toluene으로 오염된 칼럼 실험에서도 TCE와 비슷한 제거 경향을 나타냈으며 200 liter 공기 추출 후에는 오염물 초기 주입량의 98% 이상이 제거되었다. 본 실험 결과로부터 증기추출법을 이용한 TCE, toluene 정화 효율성이 규명되었으며, 휘발성 NAPL로 오염된 실제 토양을 복원하기 위한 SVE법의 적용가능성을 확인할 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.46 no.6
• /
• pp.523-527
• /
• 2002

Partition coefficient related composition of LPG are studied. Analysed sulfur compounds are ethyl mer-captan,n-propyl mercaptan and n-butyl mercaptan. The composition of liquid phase and gas phase in LPG are deter-mined by gas chromatography. The partition coefficient to related the boiling point of sulfur compounds, the temperature and the compositions of solvents, determined by using MLR(multiple linear regression) of SAS is follows; Kpc= $0.61222({\pm}0.6578)-0.04670({\pm}0.000959)Bp+0.26984(\pm0.06504)C4+0.003803(^{\circ}ae0.0019993)Tk,$ N=24, F=14.851, $R^2_{adj}$=0.6437. The boiling points of sulfur compounds at atmospheric pressure and the compositions of LPG effect mostly on partition coefficients. It is presumed that the gas odor elevating effects should be increased, where being on high tem-perature and larger amounts of n-butane.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.602-608
• /
• 2014

Hydrogen energy, a field of low-carbon substitute energy, can be produced by fossile fuel reforming and electrolysis of water etc. We developed 1kW class flat type reformer for PEM Fuel Cells. The PEMFC is highly sensitive to carbon monoxide because CO has detrimental effects on the performance of the fuel cell. Thus, reformed gas supplied to Fuel cell system, which maintained CO concentration below 10ppm. After applying optimum drive condition, reformed gas was measured with gas chromatography and could find out about each experimental condition of $H_2$ and CO concentration. As a results, The 1kW class plate type hydrogen generation system's optimum condition is A/F ratio ${\alpha}=1.3$, STR temperature 1023K, S/C ratio 3, and $PrOx1{\cdot}2$ 30cc/min. It turns out that installation of PrOx 2 stage is more efficient for reducing CO concentration.

• Clean Technology
• /
• v.18 no.4
• /
• pp.426-431
• /
• 2012

Carbon-rich coal can be utilized as a fuel for direct carbon fuel cell (DCFC). However, left-behind ash after the electrochemical oxidation may hinder the electrochemical reactions. In this study, we produced ash-free coal (AFC) by thermal extraction and then tested it as a fuel for DCFC. DCFC was built based on solid oxide electrolyte and the electrochemical performance of AFC mixed with $K_2CO_3$ was compared with AFC only. Significantly enhanced power density was found by catalytic steam gasification of AFC. However, an increase of the power density by catalytic pyrolysis was negligible. This result indicated that a catalyst activated the steam gasification reactions, producing much more $H_2$ and thus increasing the power density, compared to AFC only. Results of a quantitative analysis showed much improved kinetics in AFC with $K_2CO_3$ in agreement with DCFC results. A secondary phase of potassium on yttria-stabilized zirconia (YSZ) surface was observed after the cell operation. This probably caused poor long-term behavior of AFC with $K_2CO_3$. A thin YSZ (30 ${\mu}m$ thick) was found to be higher in the power density than 0.9 mm of YSZ.