• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.348-352
• /
• 2012

Amine volatility occurring on the $CO_2$ capture process may result in significant economic losses and environmental impact. In this study, using an volatility measurement apparatus, we measured a amine volatility of various amines including MEA(Monoethanolamine), MDEA(N-Methyldiethanolamine), Pz(Piperazine), AMP(2-Amino-2-methyl-1-propanol), 2-MP(2-Methylpiperazine), DGA(Diglycolamine). For the quantitative analysis of volatility, we analyzed the effects of temperature and $CO_2$ loading using an gas chromatography analysis. The result shows that the amine volatility was increased by increasing Henry's constant(MDEA$-CH_3$)(for AMP).

• Clean Technology
• /
• v.20 no.3
• /
• pp.298-305
• /
• 2014

Ash included in coal can cause environmental pollution and it can decrease efficiency of mass and heat transfer by getting scorched and stick in the facilities operated at high temperature. To solve this problem, a feasibility study on pulverized coal fired power plant and integrated gasification combined cycle (IGCC) using the AFC (Ash-Free Coal) as well as the development to remove the ash from the coal was conducted. In this research, optimization of operating condition was proposed by using sensitivity analysis of ASPEN $Plus^{(R)}$ to apply the coal containing under the 200 ppm ash for integrated gasification combined cycle. Particularly, the coal gasification process was classified as three parts : pyrolysis process, volatile matter combustion process and char gasification process. The dimension and operating condition of 1.5 ton/day class non-slagging gasifier are reflected in the coal gasification process model.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.850-859
• /
• 2012

Devolatilization is an important mechanism in the gasification and pyrolysis of woody biomass, and has to be accordingly considered in designing a gasifier. In order to describe the devolatilization process of wood particle, there have been proposed a number of empirical correlations based on experimental data. However, the correlations are limited to apply for various reaction conditions due to the complex nature of wood devolatilization. In this study, a simple model was developed for predicting the devolatilization of a wood particle in a fluidized bed reactor. The model considered the drying, shrinkage and heat generation of intra-particle for a spherical biomass. The influence of various parameters such as size, initial moisture content, heat transfer coefficient, kinetic model and temperature, was investigated. The devolatilization time linearly increased with increasing initial moisture content and size of a wood particle, whereas decreases with reaction temperature. There is no significant change of results when the external heat transfer coefficient is over 300 $W/m^2K$, and smaller particles are more sensitive to the outer heat transfer coefficient. Predicted results from the model show a similar tendency with the experimental data from literatures within a deviation of 10%.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.523-529
• /
• 2019

In this study, we investigated the pretreatment technologies of volatile organic compounds (VOCs) which is a problem as the semiconductor and display industry develops recently. The conventional concentrator used in the direct combustion system, is easily contaminated by the exhaust gas in the manufacturing process of the display, resulting in the low treatment efficiency of generated VOCs. Physical/Chemical analyses of the exhaust gas showed high boiling point and viscosity in addition to a large amount of molecular weight alcohols and oil components. In this study, we tried to treat degrading materials by using the heat exchanger in a pretreatment facility and some materials degrading the concentrator were condensed more than 90%. In addition, it was also confirmed that an auxiliary device of the grease filter could remove the redispersion polymer oil from the heat exchanger.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2898-2903
• /
• 2011

Adsorption/desorption characteristics of low concentration methylethylketone(MEK) and toluene vapors in beds packed with activated carbon fibers(ACF) was investigated. Performance of ACF adsorption was characterized by the equilibrium capacity, time to reach equilibrium and desorption efficiency. Experiments were carried out to define the effect of operation variables, such as feed concentration, flow rate, moisture content and bed height. The breakthrough time was shorten with the increase of temperature, flow rate and feed concentration. In addition, an increase of packed height of adsorbents lengthen the breakthrough time. The ACF loaded with MEK and toluene was satisfactorily regenerated by programed heating. It is observed that MEK is more easily removed than toluene at below temperature of $150^{\circ}C$.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.253-254
• /
• 2000

휘발성 유기화합물(Volatile Organic Compounds; VOCs)은 용제를 사용하는 도장공정, 석유화학공정 등 각종 산업공정과 자동차로부터 배출되어 대기중에 광화학 산화물 형성에 관여하거나 그 자체로 발암성을 나타내는 물질로 인간 건강에 악영향을 미치며, 또한 온실가스의 역할을 하는 것으로 알려졌다. 특히 BTEX는 산업공정에서 많이 사용되는 물질로서 반드시 처리되어야 할 규제대상물질이다. 이러한 VOCs를 처리하는 기존의 방법들로는 열적산화, 촉매산화, 활성탄 흡착법, 흡수법 등 여러 방법들이 있으나, 이러한 처리방법들은 가열이 필요하거나 흡착제 재생의 필요 같은 문제점들이 있고 또한 VOCs가 대용량으로 배출될 경우 많은 어려움이 있다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.195-196
• /
• 2002

휘발성 유기화합물(Volatile Organic Compounds; VOCs)은 용제를 사용하는 도장공정, 석유화학공정 등 각종 산업공정과 자동차로부터 배출되어 대기중에 광화학 산화물을 형성하거나 그 자체로 발암성 또는 악취성을 나타내는 물질로 인체에 유해한 영향을 미치며, 한편 간접적으로 온실가스의 역할을 하는 것으로 알려졌다. 가속기를 이용한 전자빔 처리공정의 경우 상온에서 운영되고 2차오염물 발생이 거의 없으며, 특히 유량이 매우 크고 저농도로 배출되는 VOCs의 처리의 경우에 기존의 처리법 보다 더욱 경제적이고 효율적으로 적용될수 있다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.133-134
• /
• 2003

대기 중에 부유하고 있는 입자상 물질은 보통 입경에 따라 2.5$\mu\textrm{m}$ 이하의 미세입자와 2.5$\mu\textrm{m}$ 이상의 조대입자로 나눌 수 있다. 조대입자는 토양 및 해염, 꽃가루, 화산재 및 토양 먼지와 같이 자연발생원에서 주로 생성되며, 인체에 큰 영향을 미치지 않는다. 그러나 미세입자는 화석연료의 연소, 자동차의 배출가스 및 화학물질의 제조공정 등의 인위적 발생원에서 주로 방출되며, 또한 이들 1차 생성분진과는 달리 대기중에서 황산가스나 휘발성 유기화합물 둥이 응축과정을 거쳐 가스상에서 입자상으로 변환되어 생성된 2차 입자도 환경학적으로 매우 중요한 의미를 갖는다. (중략)

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.41-42
• /
• 2008

본 논문에서는 As-doped ZnO 박막의 플라즈마 식각 특성 및 메커니즘에 관하여 실험을 수행 하였다. As-doped ZnO 박막 식각 실험은 유도 결합 플라즈마 식각 장비(inductively coupled plasma;ICP)와 $BCl_3$/Ar 플라즈마에 첨가된 $Cl_2$가스의 비, RF 전력, DC bias voltage, 공정 압력에 대한 식각 속도의 변화를 관찰 하였다. $BCl_3$/Ar 플라즈마에 $Cl_2$ 가스 첨가량 6 sccm 까지는 증가하지만 그 이후 $Cl_2$ 가스의 첨가량이 증가할 때 식각속도가 감소하였다. 이는 플라즈마 내에서 Cl 라디칼의 밀도가 증가함에 따라서 $Ar^+$의 에너지가 감소와 비휘발성 식각 부산물의 증가에 의하여 효과적인 물리적 식각이 이루어 지지 못한 것으로 판단된다. OES를 이용하여 플라즈마 내에서 라디칼들의 빛의 세기를 측정하였고, 식각 후 As-type ZnO 박막 표면에서의 화학적 결합을 보기위해 XPS 분석을 실행하였다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.429-430
• /
• 2003

TiO$_2$를 이용한 휘발성 유기화합물(VOCs)의 광촉매적 제게에 관한 연구는 오염된 공기의 정화를 위한 대안적인 산화공정으로서 현재 많은 연구가 진행되어 오고 있다(A. J. Maira et al., 2001; Rosana M. Alberici and Wilson F. Jardim, 1997). 또한 가시광영역, 암반응 및 수분 등의 영향을 최소화하기 위해 금속 성분을 첨가하여 광촉매적 활성을 높이고자 여러 가지 시도들이 행해져 왔다(Akawat Sirisuk et al., 1999; John L. Falconer and Kimberley A. Magrini-Bair, 1998). (중략)