• Tribology and Lubricants
• /
• v.36 no.3
• /
• pp.161-167
• /
• 2020

Petroleum is the most used energy source in Korea with a usage rate of 39.5% among the available 1st energy source. The price of liquid petroleum products in Korea includes a lot of tax such as transportation·environment·energy tax. Thus, illegal production and distribution of liquid petroleum is widespread because of its huge price difference, including its tax-free nature, from that of the normal product. Generally, illegal petroleum product is produced by illegally mixing liquid petroleum with other similar petroleum alternatives. In such case, it is easy to distinguish whether the product is illegal by analyzing its physical properties and typical components. However, if one the components of original petroleum product is added to illegal petroleum, distinguishing between the two petroleum products will be difficult. In this research, we inspect illegally produced gasoline, which is mixed with methyl tertiary butyl ether (MTBE) as an octane booster. This illegal gasoline shows a high octane number and oxygen content. Further, we analyze the different types of green dyes used in illegal gasoline through high performance liquid chromatography (HPLC). We conduct component analyses on the simulated sample obtained from premium gasoline and MTBE. Finally, the illegal gasoline is defined as premium gasoline with 10% MTBE. The findings of this study suggest that illegal petroleum can be identified through an analytic method of components and simulated samples.

• Korean Journal of Pharmacognosy
• /
• v.40 no.4
• /
• pp.303-308
• /
• 2009

Essential oils of the musk from wild muskrat (Ondatra zibethicus) were analyzed by gas chromatography/mass spectrometry. Fifty-six chemical components were separated, and 14 volatile compounds (78% of composition of total essential oil) of macrocyclic musk, mainly cyclopentadecanone, 12-hydroxy-14-methyl-oxa-cyclotetradec-6-en-2-one, cycloheptadecanone and 9-cycloheptadecen-1-one, were identified by the comparison of Wiley/NBS Library from the results of GC-MS. However, l-muscone, a compound reported by earlier workers in the musk from muskrat, was not detected using the spike test in this study. Interestingly, cyclohexadecanone, which has the same molecular weight (Mw 238) as l-muscone, was identified. In addition, it is considered that because of possessing much higher amounts of macrocyclic components compared to the original musk, muskrat has higher economic values in perfume and pharmaceutical industries.

• Journal of the Korean Chemical Society
• /
• v.39 no.7
• /
• pp.513-523
• /
• 1995

Polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) are the most concerned toxic organic pollutants to human. Because of their extremely high toxicity and uncertain genotoxic potential, their determination in environmental and biological samples is of great interest. Municipal solid waste incinerator facilities have been reported as the major contributors of dioxins and furans to the environment, and their formation from combustion is a universal phenomenon, everywhere. In this study dioxins and furans were analyzed from the bottom ash produced during combustion in an municipal waste incinerator located in Seoul. The EPA method was modified for sample pretreatment: the soxhlet method was used for extraction and clean-up procedures were performed by using silica and basic alumina, excluding active-carbon. The extract was then analyzed by HRGC/HRMS. A general trend of increase in the amounts of 6∼7 chlorine-substituted dioxins and furans was observed. Total dioxins, furans and 2,3,7,8-TCDD were determined as 8.05 ng/g, 4.75 ng/g, and 6.93 pg/g, respectively.

• Journal of the Korean Vacuum Society
• /
• v.21 no.4
• /
• pp.199-204
• /
• 2012

$SF_6$ gas is widely used for dry etching process of semiconductor and display fabrication process. But $SF_6$ gas is considered for typical greenhouse gas for global warming. So it is necessary to research relating to $SF_6$ alternatives reducing greenhouse effect in semiconductor and display. $C_3F_6$ gas is one of the promising candidates for it. We studied about etch characteristics by performing Reactive Ion Etching process of dry etching and reduced gas element exhausted on etching process using absorbent Zeolite 5A. $Si_3N_4$ thin film was deposited to 500 nm with Plasma Enhanced Chemical Vapor Deposition and we performed Reactive Ion Etching process after patterning through photolithography process. It was observed that the etch rate and the etched surface of $Si_3N_4$ thin film with Scanning Electron Microscope pictures. And we measured and compared the exhausted gas before and after the absorbent using Gas Chromatograph-Mass Spectrophotometry.

• Analytical Science and Technology
• /
• v.21 no.6
• /
• pp.543-552
• /
• 2008

This paper described the relatively sensitive and simultaneous analytical method for 3-monochloropropane-1,2-diol (3-MCDP, $C_3H_7ClO_2$, MW. 110) as well as 1,3-dichloropropan-2-ol (1,3-DCP, $C_3H_6Cl_2O$, MW. 128) in various foods. Food samples were homogenized in 5M NaCl solution, mixed with aluminum oxide and eluted with dichloromethane. The extracted chloropropanols were concentrated by rotary evaporator and $N_2$ blow serially were derivatized with HFBA (Heptafluorobutyric anhydride, $C_8F_{14}O_3$, MW. 410) and were determined by GC/MS using isotope dilution method. The characteristic molecular ions at m/z 253, 275, 289, 291, and 453 for HFBA derivatives of 3-MCPD (MW. 502) and 110, 275, and 277 for HFBA derivatives of 1,3-DCP (MW. 325) were chosen in selected ion mode. The method validation data showed sufficiently good properties of LOD (0.003 mg/kg), LOQ (0.010 mg/kg), linearity ($R^2{\geq}0.999$ at 0.010~1.000 mg/kg), and recovery rate (${\approx}97%$). The levels of chloropropanols in soy sauce, sauces, processed meat products, fishery products, and seasonings (n=56/157) determined by the presented method were 0.0~0.3 mg/kg.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.240-246
• /
• 2015

Formation of a strong 3-dimensional interfacial network structure via chemical reaction between hydroxyl group on silica surface and NR chain by the addition of bis(triethoxysilylpropyl)tetrasulfide (TESPT) into silica-filled NR compound was observed by using Py-GC/MS and SEM. Addition of TESPT into silica-filled NR compound decreased scorch time ($t_{10}$) due to increased sulfur content, and reduced cure rate index (CRI) via continuous reaction between sulfur atoms in TESPT, which acted as a sulfur donor, and activators and/or accelerators. Addition of TESPT in the compound improved processability and mechanical properties of the compound. Overall, we observed that the addition of TESPT into the silica-filled NR compound formed a silica-TESPT-NR network, and thus the degree of crosslinking was increased resulting in improved mechanical properties.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.790-795
• /
• 1997

Polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofuransfurans are the archetype of toxic chemicals. So it has absorbed public attention. The majors primary sources of PCDDS and PCDFs are chemical, thermal and photochemical reactions. Municipal solid waste incinerator facilities has been reported as the major contributors of dioxins to the environment. In this paper, Dioxins and furans were examined emission gas and fly ash produced during combustion in municipal solid waste incinerator. More effective method for sampling, extraction was described. The sample was extracted using a soxhlet method and purified using silicagel, alumina and carbon fibre HPLC to remove interfering compound. The extract was then analyzed by HRGC/HRMS. The result of this study showed recovery standard was good and the data resembled those of thermal processes. Total dioxins and furans were $1076.20pg/Nm^3$ and $1452.34pg/Nm^3$ respectively. The amount of highly chlorinated compound was more than that of lowly chlorinated compound. The 2,3,7,8-substituted TCDD was Just 0.34% of the total dioxins/furans amount.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.1085-1093
• /
• 2017

Plasticizers are materials added to give softness and elasticity to plastics having rigid properties to give soft properties as products, and they are mainly added to high molecular materials to give flexibility to improve workability and to improve cold resistance, resistance to volatility and electrical properties. It is used for the purpose. Most plasticizers are inert liquids, similar in function to solvents but with high molecular weight and no volatility. In addition, when dissolved in petrochemical products, only the plasticizer is separated by the matrix effect with other compounds, and qualitative and quantitative analysis. In this study, qualitative and quantitative analysis of DOA and DOP, which are representative components of petrochemical products, were conducted using MD-GC/MS and developed an optimal plasticizer analysis method.

• Analytical Science and Technology
• /
• v.22 no.5
• /
• pp.407-414
• /
• 2009

A simultaneous determination method for cholesterol, lanosterol and desmosterol was developed using gas chromatography/mass spectrometry. Urine was enzymatically hydrolyzed with ${\beta}$-glucuronidase/arylsulfatase. Samples were prepared using extractions with a mixture of ethyl acetate-hexane (2:3, v/v), followed by derivatization with a mixture of MSTFA/TMSI/TMCS (100:2:5 v/v/v). All analyses were performed using GC/MS in selective ion monitoring mode. Good linearities ($r^2=0.998{\sim}0.999$) in calibration curve and a satisfactory recovery (80.0%~113%) were achieved. Accuracy and precision values within ${\pm}15%$ in the concentration range of 5 to 200 ng/mL were also observed for all compounds. The developed method was applied to pravastatin-treated (70 and 250 mg/kg/day for 7 days, oral) hyperlipidemia rats. Those sterols were significantly lower in drug-treated rats compared to the controls, which justifies the drug efficacy. Therefore, these results indicate that the developed method was successfully applied to examine statin drug efficacy with urine sample.

• Analytical Science and Technology
• /
• v.17 no.2
• /
• pp.130-144
• /
• 2004

Recently, the air pollution in A and B industrial area has become one of the most important issues, then 60 VOCs in the area were measured using a highly sensitive method. The VOCs were adsorbed onto Carbotrap using air sampler and subsequently desorbed by a thermal desorber system into gas chromatograph-mass spectrometry (TDS-GC-MS). The peaks of all compounds had good chromatographic properties and offered very sensitive response for the EI-MS (SIM). Method detection limits (MDL) ranged from 0.01 to 0.1 ppt(v/v), and linearities of calibration curves were over 0.995. We analyzed total 90 atmosphere air samples of A and B industrial complex using the method. Benzene, toluene, ethylbenzene, xylene, n-hexane, fluorotrichloromethane, carbon tetrachloride, 1,2-dichloroethane, 1,1,1-trichloroethane, trichloroethylene, tetrachloroethylene, styrene, 1,3,5-trimethylbenzene, 1,2,4-trimethylbenzene, sec-butylbenzene and naphthalen were identified as the major compounds in the air, and their average concentrations were 0.81, 5.02 1.30, 3.0, 0.81, 37.9, 0.07, 0.15, 0.15, 0.79, 0.06, 0.33, 0.03, 0.12, 0.23, and 0.35 ppb(v/v), respectively. The concentrations of VOCs were low in summer and high in fall or winter. When the concentrations detected in air compare with WHO's norm, no case exceed it.