• Journal of the Korean Institute of Gas
• /
• v.20 no.4
• /
• pp.58-64
• /
• 2016

The main engine of a vehicle is used an common rail diesel engine for improving the efficiency of the whole load area. However, the generator engines is still used mechanical fuel injection valve drive cams. In addition, most of generator engines is applied a part-load operation of less than 50%. Therefore, diesel engine of vehicle set at 100% load is necessary to readjust in order to perform efficient operation because of part-load operation. In this study, the objective is to report the results of the part-load fuel consumption improvement by injection timing readjust to identify the operational characteristics of a generator engine currently operated in the facilities.

• Journal of the KSME
• /
• v.45 no.11 s.300
• /
• pp.40-46
• /
• 2005

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.183-188
• /
• 2003

The present work was conducted to build a propulsion system for an airship. For this purpose, free shaft gas-turbine was modified to produce electrical power. he experiments were carried out to analyze the driving rotor condition at various power shaft loads. From this analysis, an appropriate damping device was required, and the changeable inertial moment from the fly-wheel was applied. Without the appropriate damping device, instability was found, and it was resulted as power loss. Also the amount of inertial moment was certified by the performance of dynamic transient effects from the engine test results. Knowledge gained from this research could benefit the propulsion and power conversion community by increasing the better understanding of shaft loads and inertial effects.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.15-21
• /
• 2015

Natural gas fuel has known to be very promising in terms of abundancy and economic value. Therefore it is widely treated as research topics in a variety field of production, storage and utilization. Natural gas has become one of the major sources for the power generation by using internal combustion engines(ICE). Development of natural gas fuel injection device should be preceded to realize a reliable natural gas fuel supply system for a MW class power generation reciprocating ICE. In this research, an injection valve which consists of solenoid and body part with a moving plate was designed and its dynamic performance was experimented in the engine-like environment. As a result of the experiments, linearity of flow rate was obtained and overall around 2ms of response time was observed at the pressure difference of 1bar. In addition, more than 100Liter/min(@2Hz) of gas flow rate was witnessed, which is expected to be adequate for the fuel supply system of a MW class natural gas engine.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.28-33
• /
• 2015

In this study, a dual fuel engine fueled with natural gas and diesel was tested to investigate the effects of heating value variation of CNG fuel. CNG substitution rate which is defined as the ratio of CNG and diesel supplied in a heating value basis was fixed at 80%. The higher heating value was varied from $10,400kcal/Nm^3$ to $9,400kcal/Nm^3$ by mixing nitrogen gas with pure CNG and diesel fuel was injected at a fixed injection timing. The engine test results showed that thermal efficiency and power output were decreased as the heating value of mixed CNG fuel was decreased. And the peak cylinder pressure was also decreased but the ignition delay time and the combustion duration and timing were almost same.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.313
• /
• pp.75-80
• /
• 2003

에너지와 환경을 조화시킨 자원순환형 사회의 실현을 위해 하수처리장에서도 하수열이나 소화가스 등의 미이용(未利用)네어지의 유효활용이 기대되고 있다. 소화가스는 하수처리장에서 발생하는 에너지 중에서는 큰 비중을 차지하고 있으나 소화조의 가온을 위해 사용되고 있는 정도로 반드시 유효하게 활용되고 있다고는 말할 수 없다. 또 가스엔진의 코제너레이션에 의해 유효하게 할용되고 있는 처리장도 있으나 메인터넌스 비용 등의 문제로 보급되고 있지 않은 것이 실제의 상황이다. 한편, 마이크로가스터빈은 그 구조의 심풀성 때문에 가스엔진과 비교하여 메인터너스 비용의 저감이 기대되고 있어, 소화가스를 연료로 하는 코제너레이션 시스템으로서 앞으로의 보급이 기대되는 발전시스템이다. 그래서 소화가스의 마이크로가스터빈용 연료로서의 적용을 위한 검증과 운영상의 과제를 밝힐 것을 목적으로 북견시 정화센터의 처리장 내에 설치하여 실증시험을 하고 있다. 지금까지 약 4,000시간의 운전실적에서 소화가스에 기인하는 본질적인 문제도 없고 시스템이 안정되게 동작하는 것을 확인하였다. 또한 실증시험설비에는 마이크로가스터빈의 운전상태를 24시간 리모트 감시하는 리모트감시장치를 설치하고 있는데, 운전데이터의 파악과 이상 발생시의 고장진단/기술검토에 유효하게 사용되었다.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.313-313
• /
• 2015

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.4
• /
• pp.15-22
• /
• 1987

이상 최근 10년 사이 현저하게 보여준 엔진관계의 신기술과 그 배경 등을 돌아 보았을 때 발전하 는 가운데 특히 4륜차용 2사이클 엔진의 몰락이나 엔진의 주요 부품인 기화기의 쇠태는 그 어느 것이나 시대의 요구에 대한 기술의 한께 혹은 신기술의 개발 템포에 추종키 여려웠던 때문인 것 으로 생각된다. 2사이클 엔진은 비출력이 높고 밸브기구가 없어서 구조가 간단한 등의 장점이 있는 반면 배출가스대책(특히 HC), 경부하시의 부정연소 등의 문제를 가지고 있어 4륜차용으로 서는 배출가스규제를 계기로 SAAB(스웨덴), DKW(서독)의 2사이클 엔진이 자취를 감추게 되었 고 현재 남아있는 것은 일본의 경트럭용 엔진에 지나지 않는다. 또 기화기에 대해서도 배출가 스규제에 대한 대응에 밀려 공연비의 제어성, 고도에 대한 보정성, 내열신뢰성, 제어성, 고도에 대한 보정성, 내열신뢰성, 운전성 등의 요구에 엄해진 반면 흡기포트내(PI), 혹은 흡기관 중양부 내(SPI) 가솔린분사방식에 눌려서 가변벤투리식 등도 미국(1982), 일본(1983)에서 발표되었으나 1985년형의 미국차 엔진에는 기화기의 정착율이 50%에 지나지 않는등승용차용 분야에서는 그 사용이 점차 줄어두는 추세에 있다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1529-1535
• /
• 2011

Improvement of the thermal efficiency in operation and maintenance of low- and medium-speed engines is a kind of never-ending requirement in the maritime power plant business. For the purpose of improving engine management efficiency, a principal factor that represents the fitness of the engine should be identified. Gas pressure, gas temperature, and vibration have all been used as this factor. However, they have limitations in terms of response speed and diagnosis accuracy. The EFR (engine fitness ratio) is suggested as a new diagnostic factor in this paper. The EFR is defined as the ratio of particular frequencies in the frequency domain and represents the fitness of an engine. It is calculated from the fluctuation pattern of the crankshaft angular speed. The EFR was verified using an experimental method for a low-speed engine and an analytic method for a medium-speed engine.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.717-720
• /
• 2007

The 3 ton/day-scale pilot plant consists of compressor, feed channel, fixed bed type gasification & melting furnace, quench scrubber, demister, flare stack and gas engine. Syngas composition of gasification using the 35.50(waste I), 4.34%(wasteII) moisture-containing solid waste showed waste I CO 25-35%, 20-40% hydrogen, waste II 25-35%, 20-30% hydrogen. Gasification melting furnace was operated $1,500{\sim}1,600^{\cdot}C$. Gas engine was generated $35{\sim}40$ kW as waste gasification syngas.