• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.267-273
• /
• 2002

이 논문은 계측신호 분석에 의한 교량구조물의 건전성 모니터링에 관한 것으로, 2 단계 인공신경망을 사용한 구조물의 손상발견 기법에 대하여 제안하고 있다. 첫 번째 단계의 인공신경망은 구조물로부터 측정된 가속도 신호를 입력으로 사용하여 각각의 가속도계로부터 측정된 신호의 변형정도를 나타내는 신호변형지수를 출력하도록 설계되었다. 손상의 발생 여부를 나타내는 첫 번째 단계 인공신경망의 출력값은 다시 두 번째 단계 인공신경망의 입력으로 사용되어 손상의 위치와 정도를 파악하는데 쓰여진다. 모형교량을 사용한 실험으로부터 얻어진 가속도신호를 사용하여 제안된 방법의 타당성을 확인하였으며, 항후 실 교량에 대한 실험을 통하여 현장 적용의 가능성을 확인할 계획이다.

• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.69-77
• /
• 2009

The maximum and mean acceleration rates of vehicles estimated from the stopping conditions at signalized intersections provided an important clue to analyze traffic accident investigation when there was a dispute about legal liability such as first entering vehicle at the intersection, etc. This paper provided the maximum and mean acceleration rates of vehicles reflecting current traffic conditions in Korea through field studies. The mean acceleration rates of vehicles at stopline were measured up to 50m at the intervals of 5m. Results showed that the mean acceleration rate for bus was found to be $1.011^m/s^2{\sim}1.314^m/s^2$(0.1g~0.13g), and for passenger car was $1.548^m/s^2{\sim}1.818^m/s^2$(0.16g~0.19g). Statistical test results indicated that the observed differences from vehicle types and vehicle positions were statistically significant for the all ranges tested. It is expected that the accuracy of accident investigation practice will be improved by applying the acceleration rate values presented in this paper.

• Smart Media Journal
• /
• v.6 no.3
• /
• pp.83-88
• /
• 2017

The data analysis system using Big-data is worthy to be used in various fields such as politics, traffic, natural disaster, shopping, customer management, medical care, and weather information. Particularly, the analysis of the momentum of an individual using an acceleration signal collected from a wearable device has already been widely used. However, since the data used in such a system stores only the data necessary for measuring the individual activity, it does not provide various analysis results other than the exercise amount of the individual. In this paper, I propose a system that analyzes collective behavior pattern and activity based on the acceleration signal that can be collected from personal smartphones for 24 hours a day and stored in big data. I also propose a system that sends acceleration signals and receives analysis results using standard messaging to use on various smart devices.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.129-130
• /
• 2012

본 논문에서는 3축 가속도 센서의 부착 방법과 위치에 따른 진동 신호의 주파수 특성을 분석하였다. 날개 하나가 깨진 환풍기를 철제 기둥에 나사로 고정하고 회전수를 50rpm, 1710rpm, 2400rpm으로 각기 달리하여 진동을 발생 시켜 가속도 센서의 부착 방법과 위치에 따른 진동 신호를 측정하고 비교하였다. 3축 가속도 센서를 측정하기 위한 측정 소프트웨어를 설계 제작하였으며, 센서의 진동을 비교한 결과 실험에 사용된 회전수에서는 각각의 부착 방법보다는 부착 위치에 따른 진동의 차이가 있는 것으로 나타났다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.505-506
• /
• 2017

본 연구는 기존 재활치료전문가의 경험 기반 재활치료 훈련기법에서 진일보하여 보다 객관적인 데이터 기반의 효율적인 재활치료 지원이 가능한 보조시스템을 개발하고자 하였다. 근육의 움직임에 따른 활동전위를 측정하는 근전도와 실제 근육의 움직임에 따른 활동 상태를 가속도 및 자이로센서를 활용하여 측정함으로써 재활치료 시 보다 객관화된 데이터의 축적과 치료계획의 수립이 가능하다. 이를 위하여 본 연구에서는 재활치료 중 근전도 신호와 가속도, 자이로 센서를 결합한 재활운동효과 모니터링 시스템을 구현하였다. 그리고 구현된 시스템의 성능평가를 위해 피실험자 5명을 대상으로 다양한 재활치료 운동방법별 근전도 신호와 가속도 및 자이로센서 신호를 측정 및 분석하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10d
• /
• pp.223-225
• /
• 2002

MEMS 가속도센서 기술의 발전은 가속도센서를 이용한 사용자 인터페이스 구현에 대한 연구를 촉진시키고 있다. 본 논문에서는 가속도센서를 기반으로 한 휴대폰 단말기를 사용하여, HCI 관점에서 센싱 기술을 소개한다. 이러한 기술은 센서 신호로부터 컴퓨터의 변위량을 계산함으로써 Knock & Mute 와 Tilt & Scroll와 같은 인터페이스를 구현할 수 있다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.6
• /
• pp.61-68
• /
• 2020

7-tonf turbopump real-propellant tests in Naro Space Center were conducted and high-frequency signals from an accelerometer and pressure sensors installed on the casing and the inlet/outlet pipeline of LOX pump were analyzed to estimate the structural and hydrodynamic stabilities. Waterfalls, frequency spectrums and RMS(Root Mean Square) values of the measured signals were calculated and characteristic instability frequencies by the rotating cavitation and the rear floating ring seal(F.R.S) were investigated. Static pressures of the inlet/outlet pipeline and an acceleration of the pump casing are strongly affected on pressure fluctuation induced by the rear floating ring seal in the leakage path. Despite the acceleration RMS value seems totally small, the rotating-speed-related synchronous frequency affecting the shaft instability is distinctly observed in the frequency contour.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1901-1906
• /
• 2010

This classification of walking patterns is important and many kinds of applications. Therefore, we attempted to classify walking on level ground from slow walking to fast walking using a waist acceleration signal. A tri-axial accelerometer was fixed to the subject's waist and the three acceleration signals were recorded by bluetooth module at a sampling rate of 100 Hz eleven healthy. The data were analyzed using discrete wavelet transform. Walking patterns were classified using two parameters; One was the ratio between the power of wavelet coefficients which were corresponded to locomotion and total power in the anteroposterior direction (RPA). The other was the ratio between root mean square of wavelet coefficients at the anteroposterior direction and that at the vertical direction(RAV). Slow walking could be distinguished by the smallest value in RPA from other walking pattern. Fast walking could be discriminated from level walking using RAV. It was possible to classify the walking pattern using acceleration signal in healthy people.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.3
• /
• pp.214-220
• /
• 2023

In this paper, we propose a method to improve texture recognition performance from haptic acceleration signals representing the texture characteristics of object surface materials by using a Conformer model that combines the advantages of a convolutional neural network and a transformer. In the proposed method, three-axis acceleration signals generated by impact sound and vibration are combined into one-dimensional acceleration data while a person contacts the surface of the object materials using a tool such as a stylus , and the logarithmic Mel-spectrogram is extracted from the haptic acceleration signal similar to the audio signal. Then, Conformer is applied to the extracted the logarithmic Mel-spectrogram to learn main local and global frequency features in recognizing the texture of various object materials. Experiments on the Lehrstuhl für Medientechnik (LMT) haptic texture dataset consisting of 60 materials to evaluate the performance of the proposed model showed that the proposed method can effectively recognize the texture of the object surface material better than the existing methods.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.1
• /
• pp.112-122
• /
• 1995

본 연구에서는 절삭공구가 채터진동을 일으킬때 AE(Acoustic Emission) 신호와 어떤관계가 있는지를 실험적으로 연구하였다. 모달분석을 통하여 절삭공구의 고유진동수 및 모우드형상을 구하였으며, 실제 절삭실험에서는 이송방향 및 절삭방향의 가속도를 계측하여 위상치를 결정하었다. AE신호와 두 가속도 와의 관계를 알기위하여 AE 실험을 하였다. AE신호의 폭발점은 대개 Lissajous loop의 방향전환점에서 관찰 되었다.