• 한국의상디자인학회지
• /
• 제15권2호
• /
• pp.77-89
• /
• 2013

This study investigated the formation of silhouette and hemline shape of knit flare skirts according to the properties of knit material through virtual clothing with a 3D virtual clothing system called i-Designer of Technoa, thus building a database of the property data of knit material to reduce the number of sample making steps repeated and implemented several times in the process of clothes making. The results would help to estimate a silhouette in advance, offer assistance to the development of original knit wear, and explore ways to provide basic data for the development of the knit industry of the nation. The investigator made 12 kinds of experimental clothes to the angles(width of skirt: $90^{\circ}$ and $180^{\circ}$), gauge(7G, 12G, and 15G), and grain directions(wale and bias direction) of experimental clothes for virtual clothing. The dynamic characteristics of knit skirt samples according to each gauge were measured with the KES-FB system. Draper shapes were analyzed with the sectional shape data of hemline based on i-Designer. As for the measurements of the sectional shape of hemline and the formation of silhouette, the number of nodes, the average height of node mountains and valleys, and the hemline width right and left and before and after increased at the angle of $180^{\circ}$ than $90^{\circ}$. As gauges multiplied, the number of nodes, and silhouette angle dropping. When considering grain directions, the number of nodes and silhouette index increased in the wale direction at the angle of $90^{\circ}$ with the number of nodes and silhouette angle increasing in the wale direction at the angle of $180^{\circ}$.

• 한국의상디자인학회지
• /
• 제15권2호
• /
• pp.1-13
• /
• 2013

The study is to provide basic data on improving costume's fitting by developing physical integrated Basic Bodice Block's development for body types of adult women, which is based on setting up body-type information per truncus as fundamental of adult women's top product manufacture in being ready for Mass Customization era. Also, after review on the objectivity and accuracy of fitting information by real wear and virtual wear experiment on body types, not only 3D virtual clothing system was used as way of information provider of Clothing product, but also provided as basic data in order to use effectively on portion of clothing passion in responding to trend of Mass customization in advance. The consequence of the study is as followings. After analyzing significance differences per items on real and virtual wear evaluation, bowed type of type 1 had significance differences on waist measurement and hip circumference in back and side, which would be knowing as not integrated with costume, affecting form of human body according to virtual wear system bended on back region. Also, in side evaluation, every types except straight body type of type 3 appeared significant differences. In virtual wear evaluation, costume's expression with side body types were not similar to real wear until now except straight body types. It would be improvement things from 3D virtual wear system in advance.

• 한국의상디자인학회지
• /
• 제16권3호
• /
• pp.163-178
• /
• 2014

In America, where obesity rate ranks no.1 in the world, the plus size market is rapidly expanding with various American brands adding plus size lines in a way to diversify their products. As obesity is expanding throughout the younger generation, the necessity to develop products according to different characteristics of body shape that can fulfill the needs of young plus size consumers is being emphasized. In this study of young plus size, our focus is on providing wider spectrum of design choices for consumers by analyzing different body shapes, categorizing them, and then identifying the differences of design among them. More specifically, the object of this study is to analyze the elements that differentiate the designs from each other by virtually trying out the same item on avatars of various body shapes. Thus, we can identify the elements that needs to be differentiated according to different body shapes after implementing virtual fitting program on plus size shapes that are rather difficult considering the reality of domestic fashion companies. In this way, we are able to provide fundamental data for American plus size fashion market and design development for Korean fashion companies that are under way of entering or planning to enter the American market. Furthermore, this will demonstrate the actual details of the designs that will eventually help the development of specialized product for the globalization of Korean fashion industry.

• 복식문화연구
• /
• 제22권4호
• /
• pp.605-618
• /
• 2014

This study aims to compare the ease of men's slim pants patterns, and to analyze the fit and appearance through the 3D virtual garment system. The study selected four educational materials and one industrial pattern of slim pants for a total of five items. The CLO 3D Modelist program was utilized to carry out the appearance evaluation through virtual wearing and opacity, and a comparison was performed regarding the clothing pressure when the virtual model was standing and walking. The results of our comparison of the patternmaking for slim pants showed that pattern C pants had the greatest ease on the waist circumference, while B pants showed no ease. The C and E pants also had the most ease on the hip measurement. In the appearance evaluation, A pants received the most favorable results, followed by D, E, B, and C, in descending order. The clothing pressure appeared to be mainly red on the waist, crotch, and hem when standing in all pants, so the clothing pressure was high. While walking, the stress appeared to be different for the left and right parts of the body, and the most significant difference was observed on the thigh area.

• 복식문화연구
• /
• 제25권4호
• /
• pp.476-487
• /
• 2017

The purpose of this study was to suggest torso patterns that fit the three main body shapes of elderly obese women. To reduce time, costs, and also the trial and error needed to make patterns, the CLO program for 3D test wear was employed. Three virtual models for aged obese women were use, with the YUKA system used to produce torso patterns. 3D simulation of test wear and corrections was done to design optimal torso patterns. The results were as follows: First, for the three models of obese women's body shapes as realized by CLO 3D, Type 1 is lower-body obesity shapes, Type 2 is abdominal obesity shapes, and Type 3 is whole-body obesity shapes. Second, to design the study patterns, actual measurement values, back waist length and waist to hip length, were used. The armhole depth (B/4-1.5), front interscye (B/6+2.3), front neck width (B/12-0.5), front neck depth (B/12+0.5), front waist measurement (W/4+ 1.5+D), front hip measurement (H/4+2+0.5), and back hip measurement (H/4+3-0.5) were calculated using formulas. Third, according to the results of test-wearing the study patterns, reduced front neck width and depth improved the neck fit and reduced armhole depth bettered loose or plunging armhole girth and also reduced the sagging of bust c.. Also, tight sidesfrom aprotruded waist and abdomen improved with the increase of surpluses in the back waist and also back and front hip c. The exterior was enhanced by displacement of back and front darts, which distributed surpluses better.

• 복식문화연구
• /
• 제28권3호
• /
• pp.299-312
• /
• 2020

The purpose of this study is to create a shirt sloper suitable for an elderly male body shape by producing virtual models using a 3D-virtualization program, making a torso prototype using the Yuka CAD system, and employing 3D simulation to virtualize and calibrate the model. First, the following three types of obese dummies are implemented through the CLO 3D program: Type 1 exhibits body fat in the lower body; Type 2 exhibits an obese abdomen; and Type 3 displays a balanced form of obesity. Second, for the design of the shirt pattern, the waist back length (measured value+1), back armhole depth (C/10+12+3+0.5~1.5), front armhole depth (back armhole depth 0~1), front interscye (2C/10-1+0.5-0.5), armscye depth (C/10+2+3.5+ 0.5), back interscye (2C/10-1+1), front chest C (C/4+2.5+1), back chest C (C/4+2.5-1), front hem C (C/4+2.5+1(+2)), back hem C (C/4+2.5-1(+2)), cap height (AH/3-5), and biceps width (Front AH-1, Back AH-1) are calculated. Third, the virtual attachment of the shirt pattern is resolved by increasing the front and back armhole depths, and the front and rear wrinkles are improved by adding a back armhole dart. The front hem lift and lateral pull caused by the protrusion of the abdomen are amended by increasing the margin of the chest, waist C, and hip C, with the appearance improved by balanced margin distribution in the front, back, and side panels. The improved retail pattern with an increase in the front armholes C was balanced on the torso plate.

• 패션비즈니스
• /
• 제21권5호
• /
• pp.91-108
• /
• 2017

Interests in 3D virtual clothing technology and its application in online shopping malls are increasing with the advent of the Fourth Industrial Revolution. Most studies on 3D virtual clothing, however, are focused on observing drapes or ease of virtual clothing depending on fabric properties of representative clothing items. Therefore, the purpose of this study is: first, to determine if current input of typical material characteristics in 3D CLO are sufficient to formulate virtual skirts with different front and back silhouettes; second, to determine if subjective appearance evaluation matched physical shape characteristics of those skirts. In this study, appearances of typical cotton, wool, silk, rayon, and polyester skirts with different front and back pattern were compared between actual and virtual clothing depending on fabric materials. Subjective appearance evaluation was conducted by 7 experts regarding similarity between actual and virtual clothing with a 5-point scale. For objective evaluation of the both types of skirt shape, degree of roundness at the cross section, displacement of side seam, position of back waistline, and the number of folds at the skirt back were observed. In the case of cotton and wool, not the subjective appearance evaluation as well as shape characteristics of virtual skirts were well matched to the actual shape of skirts with a few material inputs. However, current material inputs for silk, rayon and polyester were insufficient to cover material differences in formation of virtual skirts with different front and back silhouettes.

• 패션비즈니스
• /
• 제16권1호
• /
• pp.103-120
• /
• 2012

The study aimed to evaluate the appearance of the men's work clothes jumpers developed to suggest the prototype work clothes jumper patterns by using the 3-D clothing simulation technology. The 3-D simulated clothing images considered the upper body features of men in the age range between 20 and 59 in South Korea. A questionnaire survey conducted previously suggested a basic jumper style with shirt collar and snap opening cuffs for the heavy industry workers; and discomforting parts of the work clothes jumper of the subject workers have been referred to for the experimental jumper appearance test. Besides, defining the measurements of men's upper bodies enabled to generate the men's 3-D virtual models representing each age group's average body feature. The significant body measurement factors for men's 3-D body modeling and jumper pattern-making were stature for the height factor; chest, waist and hip circumferences for the circumference factor; waist back, hip and arm lengths and interscye front/back for the length factor; and back neck breadth for the breadth factor and armscye and scye depths for the depth factor. The men's body measurements of 30's were implemented to three experimental jumper pattern-making methods, i.e. the 1st method using the relations based on stature and chest circumference; the 2nd method using the direct body measurements; and the 3rd method adopting the maximum ease amount of given body measurements whether relations or direct measurements except the direct measurement of scye depth. A comparison among the three experimental jumpers' simulated images highlighted that the appropriate ease amount of the jumper gained higher scores in terms of the jumpers' front, side, back and sleeve parts and the total silhouettes. Therefore the 3rd experimental jumper was finally selected for the heavy industry workers.

• 패션비즈니스
• /
• 제24권4호
• /
• pp.63-84
• /
• 2020

It is essential to consider the heavy industrial working environment factors which are regarded as harmful to workers' health and safety and suitable work motion factors for the workers' motion while developing the work clothes for painting workers in the machinery and shipbuilding industries. This study suggests the use of 3D virtual clothing simulations as a solution to protect the human body from hazardous working conditions accompanying the development of painting work clothes and assessing the work motion performance associated with the comfort while workers wear them during the work clothes. The initial aim of the study is to examine a male avatar to run work motions simultaneously within a 3D virtual clothing simulator, secondly, to present the simulation images of coverall type men's painting work clothes with the application of two experimental painting work motions and one control motion to the avatar, and finally, to present the distance analysis images of the painting work clothes and the avatar body and air gap rates through the analysis of cross-sections of the avatar body while wearing the coverall work clothes according to the work motions. The results showed that the distance degree of painting work clothes to the avatar body for each part of the human body when performing painting work motions. Moreover, 3D virtual clothing simulations enabled the creation of a male model avatar to run painting work motions together and the painting work clothes developed were found to be suitable for the painting work motions.

• 한국컴퓨터정보학회논문지
• /
• 제25권5호
• /
• pp.107-116
• /
• 2020

본 연구에서는 교육용 2개와 산업체용 2개의 남성 바지 패턴을 비교하여 중년남성의 체형에 가장 적합한 패턴제도법을 분석함으로써 맞음새가 우수한 중년남성 의복제작에 필요한 기초자료를 제공하고자 하였다. 가상착의에 대한 외관평가 결과, J패턴이 대부분의 항목에서 가장 우수한 것으로 평가되었으며, H패턴이 가장 부적합한 것으로 분석되었다. 공극량을 측정한 결과, 허리둘레 부분은 4개 패턴 모두 공극량이 매우 작은 것으로 평가되었고, 바지통은 J패턴이 가장 공극량이 작은 것으로 나타났다. 가상착의 외관평가, 색분포도, 단면도, 공극률 등을 종합한 결과, 중년남성의 체형에 J패턴이 가장 맞는 패턴이었다. 그러나 J패턴의 경우에도 바지길이에 대한 수정이 필요할 것으로 분석되었다. 본 연구는 교육용 2개와 산업체용 2개의 패턴만을 비교 분석하였으므로 J패턴을 중심으로 하여 실제 착의실험을 통한 중년남성용 바지 원형 개발이 필요할 것으로 생각된다.