• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.585-591
• /
• 2016

Recently, indoor location detection has become an important area in the IoT (Internet of Things) environment for various indoor location-based services. In this paper, our proposed method shows that a virtual region can be divided electromagnetically according to specific facilities or services in various IoT application areas called zones. The MLP (Multi-Layer Perceptron) method is applied to recognize the service zone at the current position. The MLP utilized an RSSI (Received Signal Strength Indicator) signal of the BLE (Bluetooth Low Energy) Beacon as input data and made decisions to affiliate the zone of the current region as output. In order to verify the proposed method, we constructed an experimental environment similar in size to an actual rail station using four of the beacon and two zones.

• Nuclear Engineering and Technology
• /
• v.24 no.3
• /
• pp.274-284
• /
• 1992

A 1/15-scale CREARE experiment, which simulates the thermal-hydraulic behavior in the reactor pressure vessel of a PWR during a hypothetical Loss Of Coolant Accident, has been analyzed using CATHARE code for the associated model assessment to represent the phenomenon. The key parameters examined in the CREARE experiment were known as ECC water injection rate. ECC water subcooling, system pressure, and steam flow rate coming out from the core bottom. The present CATHARE simulation, however, has been mainly focused on qualitative analysis of a countercurrent flow in the downcomer. The discrepancy of the simulation results with the experimental data is considered arising primarily from an inadequate numerical representation as well as an interfacial friction model. Accordingly it is suggested from the sensitivity studies that either multidimensional approach or further examination of momentum equations at a junction near a volume element in CATHARE be necessary in order to represent the phenomenon more realistically.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.69-72
• /
• 2008

The so-called Pier-Shafts system which consists of the continuous column and shaft is often used to support the highway bridge structure because of advantages in easy construction and low cost. In the earthquake region, the Pier-Shafts system undergoes large displacements and represents a nonlinear behavior under the lateral seismic loading. The soil-pile interaction should be considered for more accurate analysis of the Pier-Shafts system. In this study, a transverse response of a reinforced concrete Pier-Shafts system inside multi-layered soil medium is predicted using a finite element program which adopts an elasto-plastic interface model for the interface behavior between the shaft and the soil. Then, seismic analysis is performed to evaluate the performance of Pier-Shafts system under strong ground motion and their results are verified with experimental data.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.3
• /
• pp.27-40
• /
• 1999

In limit equilibrium methods(LEM), all methods employ the same definition of the safety factor as a ratio of the shear strength of the soil to the shear stress required for equilibrium, employing certain assumptions with regard to equilibrium. In addition, in the conventional finite element method of analysis, the minimum safety factor is obtained assuming certain slip surfaces after the state of stress are found. Although the stress states are obtained from the finite element method(FEM), the slope stability analysis follows the conventional method that assumes a potential slip surface. In this study, a slope stability analysis based on FEM is developed to locate the slip surface by tracking the weakest points in the slope based on the local safety factor considering the magnitude and direction of the shear stresses. It has also been applied to be compared with the slip surfaces predicted by LEM. A computer program has been developed to draw contour lines of the local safety factors automatically. This method is illustrated through a simple hypothetical slope, a natural soil slope, and a dam slope. The developed method matches very well with the conventional LEM methods, with slightly lower global safety factors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1860-1866
• /
• 2016

Helicopter-related collision accidents with structures mostly occur at landing, especially in a limited visibility environment, which necessitates some secondary equipment like a radar that can generate stationary clutter image. In this paper, we propose an algorithm that makes an image of stationary ground clutter in two dimensional range and azimuth angle domain. We present a mathematical model for the received signals from each clutter patch in the iso range ring and analyze their clutter and Doppler characteristics, assuming that a helicopter-borne radar has a rotational antenna. We propose a filter structure, which suppresses side lobe signal components while extracting a main lobe signal component, and suggest a solution for a problem stemmed from the filtering process. Finally, by conducting a simulation we show the performance of the suggested imaging algorithm on a two dimensional virtual scenario of the topographic clutter.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.448-449
• /
• 2016

Enlargement and complexification of current structures increase the expected casualty in case of accident in those e.g., fire. In that case, there only have been basic instructions such as announcement of that situation, alarm bell, exit signs, etc. but any guidance to lead to proper escape route was not been provided so far. To tackle the problem, several schemes have been proposed. However, various risk factors were not considered and route discovery performance must be improved to be applied to structures. Therefore, this paper proposes an optimal route discovery system for emergency escape from disaster situations which takes into account various possible risk factors and enhances the searching efficiency by using the $A^{\ast}$ algorithm. Performance evaluation by computer simulation shows that the proposed scheme effectively leads to safe escape route.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1947-1957
• /
• 2015

CCN networking is one of the future internet. With the rapid development of network platforms emerged a wide range of services through a virtual network environment. The performance of CCN in the high bandwidth delay is important to provide various services between nations. We can check the high bandwidth delay product in federation. Federation between the nations has the advantage of being effective to do a various services for the users, and the remote heterogeneous physical hardware engine supports various environments. Data transmission delay can be occur in long distance network even though the network is federated network. In this paper, we propose CCN-Helper protocol for data transmission delay in ling distance networks. We connect from KREONET in Korea to iLab.t in Belgique in order to test CCNx over heterogeneous federated environment.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.3
• /
• pp.311-320
• /
• 2005

In this paper an enhanced quadratic finite element for static and dynamic analysis of plate structures is presented. The performance of a proposed plate element is improved by the coupled use of non conforming displacement modes, the selective integration scheme, and the assumed shear strain fields. An efficient direct modification method is also applied to this element to solve the problem such as failure of the patch test due to the adoption of non conforming modes. The proposed quadratic finite element does not show any spurious mechanism and does not produce shear locking phenomena even with distorted meshes. It is shown that the results obtained by this element converged to analytical solutions very rapidly tough numerical tests for standard benchmark problems. It is also noted that this element is applicable to transient dynamic analysis of Mindlin plates.

• Journal of Digital Contents Society
• /
• v.14 no.1
• /
• pp.51-57
• /
• 2013

Storage device based on Flash Memory have many attractive features such as high performance, low power consumption, shock resistance, and low weight, so they replace HDDs to a certain extent. An Storage device based on Flash Memory has FTL(Flash Translation Layer) which emulate block storage devices like HDDs. A garbage collection, one of major functions of FTL, effects highly on the performance and the lifetime of devices. However, there is no de facto standard for new garbage collection algorithms. To solve this problem, we propose File Clustering Algorithm. File Clustering Algorithm respect to update page from same file at the same time. So, these are clustered to same block. For this mechanism, We propose Page Allocation Policy in FTL and use MIN-MAX GAP to guarantee wear leveling. To verify the algorithm in this paper, we use TPC Benchmark. So, The performance evaluation reveals that the proposed algorithm has comparable result with the existing algorithms(No wear leveling, Hot/Cold) and shows approximately 690% improvement in terms of the wear leveling.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.824-829
• /
• 2016

Passenger casualties in the case of ship accidents have increased because of the increase in size and complexity of current ships (such as cruise ships). Therefore, in recent years, emergency evacuation systems are receiving increased interest so as to ensure the safety of passengers. Currently, there are only basic instructions provided, such as announcements regarding the situation, alarms, and exit signs; however, no guidance toward a proper escape route has yet been provided. To solve this problem, several emergency guiding schemes have been proposed. However, these systems ignore some of the realities of ship accidents and are impractical because various risk factors are not considered. Therefore, this paper proposes an optimal route guiding system based on an $A^*$ algorithm for emergency escape during disaster situations. This system takes into account various possible risk factors. Performance evaluation using computer simulations showed that the proposed scheme is effective and leads to safe escape routes.