• Tunnel and Underground Space
• /
• v.18 no.2
• /
• pp.98-106
• /
• 2008

When a tunnel is excavated in a rock mass of poor condition, the adjacent zone of excavation surface may be reinforced by adopting the appropriate methods such as grouting and rock bolting. The reinforced effect can be evaluated by use of various numerical approaches, where the reinforcing elements may be expressed as distinct discretizations or smeared into the equivalent material properties. In this study, a simple numerical method, which can be classified as the latter approach, was developed for the elasto-plastic analysis of a circular tunnel. If a circular tunnel in a Mohr-Coulomb rock mass is reinforced to a finite thickness, the reinforced annulus may have different material properties from the in-situ rock mass. In the proposed elasto-plastic method for assessing the reinforcing effect, Lee & Pietruszczak (2007)'s method is applied to both the reinforced annulus and the outer insitu rock mass of the fictitious tunnel, and then two results are combined by enforcing the compatibility condition. The method were verified through comparing the results with the proposed method and the commercial finite difference code FLAC. When taking the variation of deformation modulus and strength parameters in the reinforced zone into account, the distributions of stress and radial displacement were much different from those obtained with the assumption of homogeneous rock mass.

• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.239-246
• /
• 2021

Portal Dosimetry was verified using EPID to secure the clinical application and reliability of the existing research dose evaluation. The dose distribution of Geant4 was compared with the measured value by 360° rotational irradiation with a 2.5 cm cone for stereotactic brain surgery. To confirm the dose distribution of patients with brain metastasis, the dose distribution investigated by inserting a Gafchromic EBT film into the parietal phantom and the dose distribution obtained from the parietal phantom using VMAT are compared and applied to actual patients. As a result of the analysis, it was confirmed that the accuracy of the beam center and the center of the couch coincide accurately with an error within 1mm as a result of QA through a pin ball. In addition, it was confirmed that the EBT3 film has excellent linearity in the range of 0 to 10 Gy according to various dose irradiation. In the same setting as the two cervical phantoms, we confirm that the implementation and simulation results calculations of dose calculations based on Geant4 using photon beams match the experimental data within the treatment planning volume (PTV). Therefore, volume modulated arc treatment (VMAT) 360° rotational irradiation was performed, and the result of iso-dose distribution analysis by rotational irradiation confirmed that it is appropriate to include a virtual tumor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.483-492
• /
• 2021

Agastachis Herba (AH) to treat anorexia and nausea and its antidiabetic efficacy was recently reported. This study examined the antioxidant activities and chemical constituents of AH and predicted the target proteins of each compound using in silico approaches. The results showed that EC50 values of AH methanol extract for DPPH and ABTS radical scavenging were 78.6 ㎍/mL and 31.0 ㎍/mL, respectively. Compared to the EC50 values of ascorbic acid (9.9 ㎍/mL, 5.2 ㎍/mL), the AH methanol extract possessed excellent antioxidant activities. Rosmarinic acid, tilianin, agastachoside, and acetin were confirmed as the major compounds of extracts by qualitative analysis performed with HPLC-PDA-MS/MS. The antidiabetic target proteins of these compounds were predicted by applying a structural similarity and inverse docking methodology using a DIA-DB server. The resulting target proteins were PPAR-γ, DPP IV, glucokinase, α-glucosidase, SGLT2, aldose reductase, and corticosteroid 11-beta-dehydrogenase, some of which have already been proven experimentally as target proteins. Therefore, the in silico methods can be considered valid. Finally, AH were extracted with various solvents to determine the optimal conditions for the extraction of active components. Methanol among organic solvents and 80% ethanol in ethanol-water mixtures were identified as the most effective solvent for the extraction.

• Land and Housing Review
• /
• v.12 no.2
• /
• pp.121-139
• /
• 2021

Technical documents in the construction field are changing from paper documents to electronic ones. As a result, the industry witnesses a trend of using portable electronic devices in searching or retrieving necessary information such as relevant regulations. Despite the improvement in the accessibility to general technical documents, a limitation is still found in accessing the electronic documents on the regulations. We see the barrier for field engineers to enhance their technical knowledge. One of major barriers is that videos, animations, and virtual reality information to enhance the visual understanding of technical content related to regulations are not linked. It is the interactive electronic technical manual (IETM) that can address such issues. The IETM is an electronic document system that enables real-time information acquisition while operating in the form of conversations with users by linking multimedia functions to document types such as specifications and guidelines. This study establishes a model of the IETM that can be operated in the planning stage of a construction project. The study also verifies its usability with a hypothetical case study. This study aims to improve the usability of the IETM in the construction project by analyzing the application effect of the IETM using the AHP technique.

• The Journal of the Korea Contents Association
• /
• v.18 no.11
• /
• pp.484-492
• /
• 2018

This study examined the effects of field complexity and type of target objects on the performance in baggage screening task. A total of 62 participants(male: 45.2%, female: 54.8%) participated and their mean age was 22.88. The simulated baggage screening task was developed for this study and after the orientation and task exercises, main experiment session was conducted. Participants performed a total of 200 tasks and 40(20%) contained target object. The complexity was set at three levels: high, middle, and low levels and the number of background items contained 20, 14. and 8 respectively. The type of target was set as gun, knife, liquid, and righter. The dependent variables were hit ratio and reaction time. The results showed that the hit ratio decreased and reaction time increased significantly as field complexity increased, and they varied depending on the type of target. The hit ratio of the knife was the highest and liquid lowest and reaction time of the knife was the fastest and liquid slowest. In addition, the interaction effect was also significant. Knife was not affected by complexity, however, small item such as lighter was most affected by complexity.

• Smart Media Journal
• /
• v.8 no.2
• /
• pp.29-38
• /
• 2019

With the advancement of information and communication technology, tactical networks are continuously being converted to All-IP future tactical networks that integrate all application services based on Internet protocol. Futuristic tactical mesh network is built with tactical WAN (wide area network) nodes that are inter-connected by a mesh structure. In order to guarantee QoS (quality of service) of application services, tactical service mesh (TSM) is suggested as an intermediate layer between infrastructure and application layers for futuristic tactical mesh network. The tactical service mesh requires dynamic QoS monitoring and control for intelligent QoS coordination. However, legacy networking nodes used for existing tactical networks are difficult to support these functionality due to inflexible monitoring support. In order to resolve such matter, we propose a tactical mesh WAN node as a hardware/software co-designed networking node in this paper. The tactical mesh WAN node is conceptually designed to have multi-access networking interfaces and virtualized networking switches by leveraging the DANOS whitebox server/switch. In addition, we explain how to apply eBPF-based traffic monitoring to the tactical mesh WAN node and verify the traffic monitoring feasibility for supporting QoS coordination of tactical-mesh traffic.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.602-609
• /
• 2018

Differential GPS (DGPS) is known as a positioning method using pseudo range correction (PRC) which is communicating between a refence receiver and moving receivers. In real world, a moving receiver loses communication with the reference receiver, resulting in loss of PRC real-time communication. In this paper, we assume that the transmission of the pseudo range correction isinterrupted in the middle of real-time positioning situations, in which calibration information is received in the DGPS method. Under the disconnected communication, we propose 'predict DGPS' that real-time virtual PRC model which is modeled by a machine learning algorithm with previously acquired PRC data from a reference receiver. To verify predict DGPS method, we compared and analyzed positioning solutions acquired from real PRC and the virtual PRC. In addition, we show that positioning using the DGPS prediction method on a real road can provide an improved positioning solution assuming a scenario in which PRC communication was cut off.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.3
• /
• pp.840-852
• /
• 2019

The influences of sporting shoe brands wants to exert on consumers in the sports shoe market has been tried in many forms, and its effectiveness has also been proven. A variety of marketing strategies are being proven by each brand that they consider to be worth using. However, marketing strategies using sports shoe collectors have never been empirically proven in their influence. This is because the collecting behaviors shown in the traditional sports shoe market is very low in comprehension. This study was initiated by critical thought that determined a new marketing strategy was needed in the sports shoe market, which is considered to be somewhat limited, and is aimed at setting and demonstrating the path to influence in establishing a marketing strategy using sports shoe collectors. To achieve the purposes of this study, 231 consumers who were exposed to stimuli for describing the products of a hypothetical sports shoe collectors were used. For data analysis, frequency analysis, reliability analysis, correlation analysis, and confirmative factors analysis and structural equation method using PASW 21.0 and AMOS 20.0 were used. Based on the results derived from this study, we have found a new path to a new marketing strategy based on the expertise held by sports shoe collectors in the sports shoe market, which we hope will serve as one of the new growth engines for the sluggish sports shoe market in Korea.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.3-12
• /
• 2021

In the remodeling projects, clients without architectural expertise have limitations in presenting requirements accurately. In some cases, designers and contractors may not recognize their demands exactly, and deliver final products that are different from the clients' intentions. 3D modeling visualizing final products in previous has been regarded as a solution to enhance understanding and communication. However, this approach has the limitation that the final results are presented as a virtual outputs. In the remodeling project, an alternative, mixed-reality, is likely to reinforce the reality as it enables to present remain structure and the parts to be built together. This paper examines the mixed reality as a solution to support decision making of clients and practitioners in remodeling projects. The examinations is conducted in high-rise office remodeling projects by means of action-research. Clients and practitioners, overview product models presented in the format of 2D drawings, BIM and mixed reality asked to evaluate the effectiveness of each methods in 12 standards. The results have shown that mixed reality has improved the sense of reality, making it easier to predict results, but recognizing patterns is difficult in some areas such as the floor, and it caused dizziness.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.365-374
• /
• 2021

Recently, the high growth rate and advantages of the crowdfunding market have also led to increased participation of brands and companies, and this also applies to fashion business. Risk has been noted to be a key factor in consumer behavior in crowdfunding. With the high-risk context of crowdfunding where supporters inevitably bear to pay full amount of price before receiving the actual products. Factors enhancing or inhibiting perceived risk of crowdfunding need to be explored. The past literature on perceived risk and consumer attitudes in crowdfunding has expanded, but it has rarely covered the context of experience goods such as fashion products. In addition, the platform characteristics in relation to perceived risk should be addressed. The current study attempts to address the effect of the perceived amount of information offered in a fashion crowdfunding project on perceived risk and the intention to participate in the project. For the experiment of this study, a fictitious crowdfunding page for fashion products was set as the stimuli. A total of 240 Korean participants were recruited and their responses were statistically analyzed using SPSS 24.0 software. In the results, the greater the amount of detailed information about the fashion crowdfunding project, the higher the intention to participate the project. The greater the amount of information provided, the lower the perceived risk of consumers. Moreover, the lowered perceived risk affected the intention of participate. Perceived risk has a partial mediation in the relationship between the amount of information and intention to participate. Theoretical and managerial implications are discussed.