• 제목/요약/키워드: 가변 대역

Search Result 303, Processing Time 0.032 seconds

A Design of Tunable Band Pass Filter using Varactor Diode (버렉터 다이오드를 이용한 가변 대역통과여파기 설계)

  • Ha, Jung-Hyen;Shin, Eun-Young;Kang, Min-Woo;Gwon, Chil-Hyeun;Park, Byung-Hoon;Lim, Jong-Sik;Choi, Heung-Taek;Ahn, Dal
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.10 no.6
    • /
    • pp.1196-1200
    • /
    • 2009
  • This paper proposed a tunable band pass filter. It is two-poles direct capacitive coupled resonator band pass filter which the capacitors of parallel resonators are changed by varactor diodes. The DC bias controls to change the value of capacitance in the parallel resonator for tunning the pass band. To validate the proposed design method, we fabricated the band pass filter which has tunable center frequency from 200MHz to 245MHz.

SIP based Tunable BPF for UHF TV Broadcasting (UHF대역 TV방송을 위한 가변형 대역통과필터)

  • Lee, Tae-C.;Park, Jae-Y.
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.1925-1926
    • /
    • 2008
  • 본 논문에서는 UHF TV방송 전 대역 Ch.14(473MHz)$\sim$Ch.69(803MHz)까지의 모든 채널에서 동작하는 유도결합구조의 RF동조회로를 설계하였다. 기존 자기결합구조의 RF동조회로는 PCB 양면을 사용하여야 하고 수작업으로 Air Coil 간격을 조절해야만 한다. 부품의 집적화와 양산 효율성 측면에서 자기결합구조의 단점을 해결할 수 있도록 하기 위해 본 논문에서 제안한 유도결합구조는 수동부품인 칩인덕터와 칩커패시터 및 가변용량 다이오드만을 사용하여 RF동조회로를 설계하였다. 칩인덕터는 Air Coil에 비해 낮은 소자 Q값을 가진다. 상대적으로 낮은 Q값을 갖는 칩인덕터를 사용하기 때문에 이를 보완하기 위해 Peaking용 칩인덕터를 설계 디자인에 적용하였다. 가변형 대역통과필터로 동작하기 위해 자기결합구조와 동일하게 가변용량 다이오드를 이용하였다. UHF TV방송 전 대역(470$\sim$806MHz)에서 -2.88 $\sim$ -3.97dB의 삽입손실 특성 및 -8dB 이상의 반사손실 특성과 330MHz의 중심주파수 변화 범위를 갖는다. 현재 상용중인 지상파 튜너에 적용되고 있는 자기결합구조의 RF동조회로를 대치하여 적용될 수 있을 것이다.

  • PDF

A Tuable Dual-Band Bandpass Filter Design Using Variable Characteristic Transmission Lines (가변 특성 임피던스 전송 선로를 이용한 가변 이중 대역 대역 통과 여파기)

  • Chaudhary, Girdhari;Jeong, Yong-Chae;Lim, Jong-Sik;Kim, Dong-Su;Kim, Jun-Chul
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.22 no.9
    • /
    • pp.852-857
    • /
    • 2011
  • In this paper, the application of a variable characteristic impedance transmission line that can be used to design a dual-band bandpass filter(BPF) is presented. The proposed filter offers a fixed first frequency passband and a controllable second passband. The tuning of the second passband is achieved by varying the characteristic impedance of and open shunt stub line in a stub loaded resonator(SLR) with the help of a defected ground structure(DGS) transmission line and varactor diodes. In order to validate the proposed structure, a two stage dual-band BPF with three transmission zeros was implemeted and experimentally verified based on its theoretical predictions and simulations.

Time Domain Multiple-channel Signal Processing Method for Converting the Variable Frequency Band (가변 주파수 변환을 위한 시간 영역 다중채널 신호처리 알고리즘)

  • Yoo, Jae-Ho;Kim, Hyeon-Su;Lee, Kyu-Ha;Lee, Jung-Sub;Chung, Jae-Hak
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.1A
    • /
    • pp.71-79
    • /
    • 2010
  • The algorithm of multiple channel signal processing requires the flexibility of variable frequency band, efficient allocation of transmission power, and flexible frequency band reallocation to satisfy various service types which requires different transmission rates and frequency band. This paper proposes an improved multiple channel signal processing for converting the frequency band of multiple carrier signals efficiently using a window function and DFT in the time domain. In contrast to the previous algorithm of multiple-channel signal processing performing band-pass signal processing in the frequency domain, the proposed algorithm is a method of block signal processing using a window function in the time domain. In addition, the complexity of proposed algorithm of the window function is lower than that of the previous algorithm performing signal processing in the frequency domain, and it performs the frequency band transform efficiently. The computer simulation result shows that the perfect reconstruction of output signal and the flexible frequency band reallocation is performed efficiently by the proposed algorithm.

The Performance Analysis of System by Variable Effective Bandwidth According to use The Reserved Resource and The Waiting Buffer (자원예약과 호 대기 버퍼 사용에 따른 가변등가대역에 의한 시스템 성능 분석)

  • Seong, Hong-Seok
    • 전자공학회논문지 IE
    • /
    • v.46 no.3
    • /
    • pp.42-47
    • /
    • 2009
  • In CDMA system, the call admission control method using the variable effective bandwidth concept is employed in this paper. The bandwidth for a new call and a handoff call is allocated by considering the number of mobile station being served and dynamically assigned by taking account of the blocking rate of new calls and the dropping rate of handoff calls. There is reserved resource for handoff call. In the case radio resource is insufficient, a new call and a handoff call stand by in buffer for constant time. When radio resource come about, the waiting call is allocated the resource. I analyze the performance of system according to existence and nonexistence of buffer by a simulation study.

Improvement of Flexible Zerotree Coder by Efficient Transmission of Wavelet Coefficients (웨이블렛 계수의 효율적인 전송에 따른 가변제로트리코더의 성능개선)

  • Joo, Sang-Hyun;Shin, Jae-Ho
    • Journal of the Korean Institute of Telematics and Electronics C
    • /
    • v.36C no.9
    • /
    • pp.76-84
    • /
    • 1999
  • EZW proposed by Shapiro is based on a zerotree constructed in a way that a parent coefficient in a subband is related to four child coefficients in the next finer subband of similar orientation. This fixed treeing based on 1-to-4 parent-child is suitable to exploti hierachical correlations among subbands but not to exploit spatial correlations within a subband. A new treeing by Joo, et al. is suggested to simulatneously exploit those two correlatins by extending parent-child relationship in a flexible way. The flexible treeing leads to increasing the number of symbols and lowering entorpy comparing to the fixed treeing, and therefore a better compression can be resulted. In this paper, we suggest two techniques to suppress the increasing of symbols. First, a probing bit is generated to avoid redundant scan for insignivicant coefficients. Second, since all subbands do not always require the same kind of symbol-set, produced symbols are re-symbolized into binary codes according to a pre-defined procedure. Owing to those techniques, all symbols are generated as binary codes. The binary symbols can be entropy-coded by an adaptive arithmetic coding. Moerover, the binary symbol stream can give comparatively good performances without help of additional entropy coding. Our proposed coding scheme is suggested in two modes: binary coding mode and arithmetic coding mode. We evaluate the effectivenessof our modifications by comparing with the original EZW.

  • PDF

Design of Variable Active Inductor with Feedback LC-Resonator for Improvement of Q-Factor and Tuning of Operating Frequency (Q 지수의 개선과 동작 주파수 조절을 위해 궤환 LC-공진기를 이용한 가변 능동 인덕터의 설계)

  • Seo, Su-Jin;Ryu, Nam-Sik;Choi, Heung-Jae;Jeong, Yong-Chae
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.19 no.3
    • /
    • pp.311-320
    • /
    • 2008
  • In this paper, a new variable active inductor using a conventional grounded active inductor with feedback variable LC-resonator is proposed. The grounded active inductor is realized by the gyrator-C topology and the variable LC-resonator is realized by the low-Q spiral inductor and varactor. This variable LC-resonator can compensate the degradation of Q-factor due to parasitic capacitance of a transistor, and the frequency range with high Q-factor is adjustable by resonance frequency adjustment of LC-resonator. The fabricated variable active inductor with Magnachip $0.18{\mu}m$ CMOS process shows that high-Q frequency range can be adjusted according to varactor control voltage from 4.66 GHz to 5.45 GHz and Q-factor is higher than 50 in the operating frequency ranges. The measured inductance at 4.9GHz can be controlled from 4.12 nH to 5.97 nH by control voltage.

Research on Output Polarization of Lyot-type Fiber Comb Filter based on Polarization-diversity Loop Structure (편광상이 고리 구조 기반 1차 Lyot형 광섬유 빗살 필터의 출력 편광 연구)

  • Jo, Songhyun;Lee, Yong Wook
    • Proceedings of the KIEE Conference
    • /
    • 2015.07a
    • /
    • pp.1267-1268
    • /
    • 2015
  • 본 논문에서는 평탄 대역 모드와 손실형 평탄 대역 모드의 투과 스펙트럼을 가지는 PDLS 기반 Lyot형 광섬유 빗살 필터에서 출력되는 편광 상태를 이론적으로 분석하였다. 분석을 위해 파장 가변 레이저, 편광 조절기, 그리고 편광자를 사용하였다. 필터에 배치된 두 개의 반파장판을 적절히 조절하여 평탄 대역 모드와 손실형 평탄 대역 모드를 선택할 수 있다. 편광 조절기를 적절히 조절하면 파장 가변 레이저로부터 나오는 빛의 편광을 원하는 것으로 선택 가능하고 한 채널 내에서 필터의 투과 대역을 미세하게 조절할 수 있다. 그리고 편광자를 통해 출력되는 스펙트럼으로 출력 스펙트럼의 파장별 편광 상태를 알 수 있다.

  • PDF

Study on the UHF-band Variable Attenuator Using the 3-dB Coupler (UHF대역 3-dB 커플러(Coupler)를 이용한 가변 감쇄기(Attenuator)에 대한 연구)

  • 박경태
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.2 no.2
    • /
    • pp.68-74
    • /
    • 2001
  • A design and implementation method for the UHF-band(800MHz) variable attenuator using the 3dB coupler is proposed. The 90 degree, 3-dB Coupler is used for the variable attenuator. The principal theory for the 3-dB coupler is introduced. The 3-dB Coupler is designed by the mathematical analysis and a computer simulation tool. A PIN diode is used for the variable resistor at UHF-band. The variable attenuator using the 3-dB coupler and the PIN diode is designed and implemented. The measured results for the variable attenuator by a network analyzer show that the insertion loss is below -l0dB, and the continuous variable attenuation range is about 10dB.

  • PDF

A Variable Transmission Window MAC protocol for QoS Support in EPON System. (EPON 시스템 QoS 지원을 위한 가변 윈도우 MAC 프로토콜)

  • Hwang Junho;Yoo Myungsik
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.11B
    • /
    • pp.891-899
    • /
    • 2004
  • Ethernet passive optical network (EPON) has drawn many attention as a promising access network technology because it can provide a high bandwidth with a low cost. Since the uplink in the EPON system is shared by many users, it is necessary for an EPON system to have an efficient bandwidth allocation mechanism. In addition, as the users demand more QoS-oriented applications, it is necessary for an EPON system to have an efficient mechanism supporting QoS. In this paper, we propose a variable window dynamic bandwidth allocation (DBA) algorithm for the EPON system. Unlike the previously proposed DBA algorithms, the variable window algorithm guarantees the QoS for the highest priority class, and at the same time provides more enhanced QoS for the lower priority classes by dynamically allocating bandwidth if necessary. It is verified through the simulations that the variable window algorithm can provide more enhanced QoS performance than other DBA algorithms.