• Journal of Aerospace System Engineering
• /
• v.18 no.3
• /
• pp.76-85
• /
• 2024

Recently, from a global perspective, the use of small unmanned aerial vehicles in terrorism and warfare is increasing, and the need for anti-drone shooting training targeting small UAVs is increasing. However, in reality, there are many cases in Korea where anti-drone shooting training is restricted, due to complaints such as noise. In this paper, we describe the development and testing of an electric-powered direct strike type high-speed, low-noise small aerial target drone. To achieve the flight speed and endurance required for shooting training, target drone sizing was performed, and aerodynamic performance analysis was conducted using a CFD program. Based on the performance analysis, the motor propulsion system was selected and a variable pitch propeller system was designed, and performance tests were performed on a ground test rig. Finally, the target flight speed, flight time, and flight noise level were confirmed through flight tests.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.81-86
• /
• 2014

A smart phone subscriber needs wide bandwidth services for more fast data communication on the internet. The conventional MIMO system is now developing to resolve these problems with limited device space for antenna and frequency band environment reserved. One of way to make it practically is to add the number of antennas theoretically. But it is difficult to increase the antenna element as a limited space on the system. Therefore an active beam forming scheme is known as a way of constructing a Compact MIMO system for that. In this paper, the fast switching control block was suggested to adjust a reactance of the antenna element and verified experimentally the effects by switching signal on an orthogonal beam forming through a spatial domain.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.4
• /
• pp.349-360
• /
• 2006

Controller for doubly-fed induction-type wind generation system should be designed with mechanical power on blade. The controller in this paper consists of upper level controller and lower level controller. The upper level controller determines operating modes according to mechanical input power and calculates proper reference values. There are 4 operating modes - minimum speed control, variable torque control, torque limit control and idle mode. The lower level controller performs current regulated PWM control of rotor-side converter and grid-side inverter. A wind turbine simulator is implemented using doubly-fed induction-type generator and DSP based back-to-back converter to verify the performance of designed controller experimentally.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.39-45
• /
• 1999

In case of field weakening region, torque is directly affected by flux. In this region, the flux reference is cIecreased inversely proportional to the rotor speed. As the flux is decreased, the magnetizing inductance is nonnally increased The increased magnetizing inductance limited voltage for controlling current In this paper, rreasuring q axis voltage in field weakening region, magnetizing inductance in flux calculating can be readjusted. Computer simulation and experiment results demostrate the efficacy of the prqx>sed rrethod. Proposed algorithm is expected to the application of the adjustable drive system in the spinning and weaving field. field.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.71-73
• /
• 2008

급변하는 전압 변동 상황에서 전력 제어를 수행하기 위해서 기존의 동기좌표 위상각 검출 제어기의 특성을 보완할 수 있는 방법을 제시하였다. 실질적인 SRF (Synchronous Reference Frame) - PLL(Phase Locked Loop) 시스템에서 계통 전압은 이상적이지 않고 센서 노이즈 등의 저감을 위하여 측정된 전압에 LPF(Low Pass Filter)를 사용하고 있는데 이러한 LPF의 특성을 고려하여 위상각 제어기의 PI게인을 설정하는 방법을 제시하였으며 가변 게인과 LPF 차단주파수 변동방식을 이용하여 전원 전압 사고의 종류에 따라 위상과 전압이 급변하는 경우에 대하여 시뮬레이션과 실험을 통해 제한된 방법으로 동특성이 개선되고 원하는 응답속도로 설계가 가능함을 보였다.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.7-16
• /
• 2009

Provision of advanced warning information is one of the useful countermeasures to prevent traffic accidents. Analysis of user's preference for any information contents would be a backbone in designing more effective warning information systems. This study aimed at deriving more comprehensive and valuable warning information that leads to user's safer driving by conducting a questionnaire survey. In total, 258 people including various age groups and driving experiences participated in the survey. Preferable warning information contents were identified by this study. It is expected that the results would be useful data for providing warning information to drivers.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.35-38
• /
• 2005

인버터는 전기적으로 DC(직류)를 AC(교류)로 변환하는 역 변환 장치이며, 상용전원(AC 22V/440V)으로부터 공급된 전력을 입력받아 전압과 주파수를 가변시켜 전동기에 공급함으로써 전동기의 속도를 고효율로 이용하게 제어하는 장치이다. 본 논문에서는 550kW급 IGBT, DIODE의 발열에 의한 인버터 내부의 열 및 온도분포를 ICEPAK 상용코드를 통하여 수치적 해석을 수행하였다. 인버터의 발열은 캐패시터의 수명과 소자들의 오작동 등 많은 열적 문제를 가지고 있으며 Heat-sink, Fan, Duck등을 통하여 전도와 대류가 이루어지는 시스템이다. 인버터은 많은 파라미터들에 의해 온도가 결정되기 때문에 실험을 통한 해석은 제한적 일수 밖에 없다. 따라서 수치해석을 통하여 빠른 시간에 효율적인 열 설계를 할 수 있으며, 인버터의 크기는 최종적으로 Heat-sink의 형상에 따라 달라지므로 이를 최적화 하고 소형화 하는 작업이 필요하다. 인버터의 복잡한 내부구조상 하단부(발열원, Heat-sink, Fan등)만 수치해석을 수행하였을 때와 Full Model과는 $15^{\circ}C$ 온도 차이를 보였다. 최종적으로 인버터의 최적 열 설계를 위하여 Frame위치 변경, Heat-Sink 형상변화등 많은 수치해석을 통하여 만족할 만한 결과를 얻었다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.161-170
• /
• 2017

The balise is a device for the railroad signal control systems, which is installed between both rail. The balise sends fixed or variable data, named telegram, to the train with wireless method. The telegram includes the position information, the movable distance under the signal status, the gradient, the speed, the temporary speed limit, etc. This research is on a design of the DBPL encoder for the balise. Normally the DBPL encoder for the balise is with the ASIC or FPGA technology. In this research, the DBPL encoder is designed with commercial low power operable micro-controller. The firmware(logic level encode) and the SPI Bus function block(physical level output) of the micro-controller are used for the DBPL encode. Under the european standard, the required working speed of the DBPL encoder is 564.48Kbps. The DBPL encoder of this research is tested under the speed of 564.48Kbps, and it worked properly.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.6
• /
• pp.1495-1507
• /
• 1997

Among a number of approaches to text compression, adaptive dictionary schemes based on a sliding window have been very frequently used due to their high performance. The LZ77 algorithm is the most efficient algorithm which implements such adaptive schemes for the practical use of text compression. This paperpresents a VLSI architecture designed for processing the LZ77 algorithm in parallel. Compared with the other VLSI architectures developed so far, the proposed architecture provides the more viable solution to high performance with regard to its throughput, efficient implementation of the VLSI systolic arrays, and hardware scalability. Indeed, without being affected by the size of the sliding window, our system has the complexity of O(N) for both the compression and decompression and also requires small wafer area, where N is the size of the input text.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3C
• /
• pp.157-162
• /
• 2011

For blind equalization of communication channels, concurrent equalization is useful to improve convergence characteristics. However, the concurrent equalization will result in limited performance enhancement by continuing concurrent adaptation with two algorithms after the equalizer converges to steady-state. In this paper, to improve the convergence characteristics and steady-state performance of the concurrent equalization, proposed is a new concurrent equalization technique with variable step-size parameter and weight-based tap coefficients update. The proposed concurrent vsCMA+DD equalization calculates weight factors using error signals of the variable step-size CMA (vsCMA) and DD (decision-directed) algorithm, and then updates the two equalizers based on the weights respectively. The proposed method, first, improves the error performance of the CMA by the vsCMA, and enhances the steady-state performance as well as the convergence speed further by the weight-based tap coefficients update. The performance improvement by the proposed scheme is verified through simulations.