• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.179-188
• /
• 2010

The concern of Software Product Line(SPL) engineering is spreading widely because the program or product developers are able to satisfy the customer's demands quickly and give a way to handle maintenance efficiently. SPL is a reuse paradigm that reuse common parts and adopts variable parts optionally to form a differentiated product by analyzing domains. Purposes of this paper are to design an architecture which has a dynamic reconfiguration function and to develop basic components which are the basic unit of reconfiguration to raise the reuse level of the guided weapon system using the SPL. Initially we design an architecture and define basic components for developing a dynamic reconfigurable components based on SPL. Then we develop the composer for physical components and behavior components referenced by behavior models of OneSAF.

• Journal of the Korea Society for Simulation
• /
• v.15 no.2
• /
• pp.59-69
• /
• 2006

Component-based software development is introduced as a new development paradigm in software development method. This approach is different from existing software development approach because it is based on reusable and autonomous unit, component. Therefore, component-based development(CBD)is divided into two stages; component development process and component assembly process; application development process. Component development process is the core of CBD because component has a key for good software. Currently many methodologies or tools have been introduced by various academies or industries. However, those don't suggest systematic and flexible modeling techniques adaptable easily into component development project. Existing approaches have a unique orarbitrary modeling technique or provide heuristic guidelines for component modeling. As a result, many component developers are faced with a difficult problems; how to developcomponent models, when develop which diagrams, and so on. In order to address this problem, we suggest a meta-model driven approach for component development in this paper. We provide meta-models according to both layer and development phase. We expect that suggested meta-models allow component developers to develop appropriate models of the time.

• Analytical Science and Technology
• /
• v.24 no.6
• /
• pp.467-476
• /
• 2011

Solubility data of carbon dioxide ($CO_2$) in the imidazolium-based ionic liquids with methylsulfate anion are presented at pressures up to about 45 MPa and at temperatures between 303.15 K and 343.15 K. The ionic liquids studied in this work were 1-ethyl-3-methylimidazolium methylsulfate ([emim][$mSO_4$]), 1-butyl-3-methylimidazolium methylsulfate ([bmim][$mSO_4$]). The solubilities of $CO_2$ were determined by measuring the bubble point or cloud point pressures of the binary mixtures using a high-pressure equilibrium apparatus equipped with a variable-volume view cell. The equilibrium pressure increased very steeply at high $CO_2$ compositions. The $CO_2$ solubility in ionic liquids increased with increase of the total length of alkyl chains attached to the imidazolium cation of the ionic liquids. The phase equilibrium data for the $CO_2$ + ionic liquid systems have been correlated using the Peng-Robinson equation of state.

• Annual Conference of KIPS
• /
• 2002.11c
• /
• pp.2289-2292
• /
• 2002

최근 웹을 기반으로 한 문서의 전자화가 이루어지면서 기존의 전통적인 펜기반 교정 시스템 또한 온라인상의 전자 문서 환경에 맞게 변화하고 있다. 이러한 펜기반 입력 기법을 사용하는 교정 시스템에서는 일반문서와 달리 웹 문서의 구조정보를 고려한 편집이 지원되어야 하며 또한 교정부호와 텍스트간의 정확한 영역 인식이 이루어져야 한다. 본 연구에서는 온라인 교정 시스템 모델링을 통하여 온라인 환경에 적합한 교정 부호를 정의하고, 교정 대상 텍스트 영역을 편집 가능한 단위로 구분하여 효율적인 편집 연산이 이루어 질 수 있도록 하였다. 또한 웹 기반의 구조문서(HTML/XML) 편집 환경을 고려하여 편집으로 인한 문서의 구조 정보 변경을 지원하기 위하여 텍스트를 비구조 및 구조정보 텍스트로 분류하여 정의하였다. 본 연구에서는 이러한 모델에 기반하여 교정 부호의 특성에 따른 가변적인 편집 텍스트 영역 인식 규칙 모델을 정의하여 교정 부호와 편집 텍스트 영역간의 모호성을 최소화하고, 편집으로 인한 문서의 구조 정보 변경을 지원하는 시스템을 구현하였다. 결과적으로 온라인 웹 문서 환경에서 펜기반의 모호한 교정 부호의 입력을 인지적인 관점에서 해석하여 보다 정확한 교정 작업 수행을 지원하도록 하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.6
• /
• pp.481-487
• /
• 2009

This paper proposes a regulation method of DC line voltage for urban transit system fluctuated during the acceleration or deceleration by using supercapacitor. Supercapacitor is modelled electrically under the assumption of three different time constants of RC circuits with variable capacitances depending on the voltage. And its parameters are determined by the experimental measurements. The energy storage system using supercapacitors is installed based on this model, and the proposed model is tested through the simulations and experiments, and the controller for charging and discharging is designed. Finally, it is tested at Kyoungsan test site for the urban light rail road system and the energy saving effect is evaluated economically.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.2
• /
• pp.134-141
• /
• 2009

The new method is proposed to improve the dynamics of the phase angle detector during abrupt voltage dip caused by a grid fault. Usually, LPF(low pass filter) is used in the feedback loop of SRF(Synchronous Reference Frame) - PLL (Phase Locked Loop) system because the measured grid voltage contains harmonic distortions and sensor noises. A better transient response can be obtained with the proposed design method for SRF-PLL by the analysis of linearized model of the PLL system including LPF. Furthermore, in the proposed method, the controller gain and LPF cut-off frequency are changed from normal value to transient value when the voltage disturbance is detected. This paper shows the feasibility and the usefulness of the proposed methods through the computer simulation and the experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.6
• /
• pp.601-609
• /
• 2000

Direct torque control(DTC) of AC motor has the fast torque and flux dynamic responses even though it has very simple scheme to implement. However, DTC do not show good performance at low speed range with conventional open loop stator flux observer when stator resistance varied. Therefore, authors propose a new nonlinear stator flux observer in order to estimate the stator flux of induction motor at low speed and show its simulation results.

• The Journal of Information Technology
• /
• v.5 no.4
• /
• pp.57-64
• /
• 2002

The system that is thermal test system for elements has been controlled generally by PID algorithm because of its characteristic. There is not a mathematical model for the system. So the system that is use the PID controller is not properly operated. To solve this problem, we propose a fuzzy algorithm that parameters and rule base is selected by self-searched algorithm for each system. The input fuzzy membership function is adapted based on the set stable range. Output membership function is nearly fixed but some parameter is adjustable. The rule base is changed under basis on the system response. The output value computed through inference and defuzzification is mapped into a value that is proper for the system operation. Through this regulation, it will be possible to prevent the temperature of system to go into the unstable temperature.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.289-292
• /
• 2005

PID controllers, which have been widely used in industry, have a simple structure and robustness to modeling error. But it is difficult to have uniformly good control performance in system parameters variation or different velocity command. In this paper, we propose an adaptive PID controller based on a gradient descent learning. This algorithm has a simple structure like conventional PID controller and robustness to system parameters variation. To verify performances of the proposed adaptive PID controller, the speed control of nonlinear DC motor is performed. The simulation results show that the proposed control systems are effective in tracking a command velocity under system parameters variation.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.5
• /
• pp.213-217
• /
• 2001

Excessive memory buffer requirement in continuous media playback is a serious impediment of wide spread usage of on-line multimedia service. Skewed access frequency of available video files provides an opportunity of re-using the date blocks which has been loaded by one session for later usage. We present novel algorithm which minimizes the buffer requirement in multiple sessions of multimedia playbacks. In continuous media playback originated from the disk, a certain amount of memory buffer is required to synchronize asynchronous disk. Read operation and synchronous playback operation. As aggregate playback bandwodth increases, larger amount of buffer needs to be allocated for this synchronization purpose. The focus of this work is to study the asymptotic behavior of the synchronization buffer requirement and to develop an algorithm coping with this excessive buffer requirement under bandwidth congestioon. We argue that in a large scale continuous media server, it may not be necessary to read the blocks for each session directly from the disk. The beauty of our work lies in the fact that it dynamically adapts to disk utilization of the server and finds the optimal way of servicinh the individual sessions while minimizing the overall buffer space requirement. Optimality of the proposed algorithm is shown by proof. The effectiveness and performance of the proposed scheme is examined via simulation.