• Journal of the Korea Convergence Society
• /
• v.9 no.7
• /
• pp.69-75
• /
• 2018

The key technology of Industry 4.0, Smart factory is evaluated as the driving force of our economic development hereafter and a lot of researches have been established. Various entities including devices, products and managers exist in smart factory, but roles of these entities may be continuous or variable and can become extinct not long after. Existing methods for access control are not suitable to adapt to the variable environment. If we don't consider certain security level, important industrial data can be the targets of attacks. We need a new access control method satisfying desired level of efficiency and security without excessive system loads. In this paper, we propose a new RBAC-PAC which extend AC defined for PKC to the authority attribute of roles. We distribute PACs for roles through block chain method to provide the efficient access control. We verified that RBAC-PAC is more efficient in the smart factory with large number of entities which need a frequent permission update.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.6
• /
• pp.1217-1223
• /
• 2020

The Block cipher CHAM is lightweight block cipher for low-end processors, developed by National Security Research Institute from Korea. The mode of operation is necessity for efficient operation of block cipher, among them, the counter (CTR) mode has good efficiency because it is easy to implement and supporting parallel operation. In this paper, we propose the optimized implementation for block cipher CHAM-CTR. The proposed implementation can be skipped some rounds by pre-computation. Thus it has better calculating speed than existing CHAM. Also, this implementation pre-load some of round keys to registers, before entering round functions. It makes reduced 160cycles loading time for round key load. Finally, proposed implementation achieved higher performance about 6.8%, and 4.5% for fixed-key scenario, and variable-key scenario, respectively.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.9
• /
• pp.76-84
• /
• 1999

EZW proposed by Shapiro is based on a zerotree constructed in a way that a parent coefficient in a subband is related to four child coefficients in the next finer subband of similar orientation. This fixed treeing based on 1-to-4 parent-child is suitable to exploti hierachical correlations among subbands but not to exploit spatial correlations within a subband. A new treeing by Joo, et al. is suggested to simulatneously exploit those two correlatins by extending parent-child relationship in a flexible way. The flexible treeing leads to increasing the number of symbols and lowering entorpy comparing to the fixed treeing, and therefore a better compression can be resulted. In this paper, we suggest two techniques to suppress the increasing of symbols. First, a probing bit is generated to avoid redundant scan for insignivicant coefficients. Second, since all subbands do not always require the same kind of symbol-set, produced symbols are re-symbolized into binary codes according to a pre-defined procedure. Owing to those techniques, all symbols are generated as binary codes. The binary symbols can be entropy-coded by an adaptive arithmetic coding. Moerover, the binary symbol stream can give comparatively good performances without help of additional entropy coding. Our proposed coding scheme is suggested in two modes: binary coding mode and arithmetic coding mode. We evaluate the effectivenessof our modifications by comparing with the original EZW.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.363-369
• /
• 2021

In this paper, We propose variable cut-off frequency and variable sample rate small-area multi-channel digital filter for telemetry system. Proposed digital filter reduced hardware area by implementing filter banks that can variably use cut-off frequency and sample rate without additional filter banks for an arbitrary cut ratio. In addition, We propose the architecture in which sample rate can variably be selected according to the number of filters that pass through the multiplexer control. By using time division multiplexing (TDM) supported by the finite impulse response (FIR) intellectual property (IP) of Quartus, the proposed digital filter can greatly reduce digital signal processing (DSP) blocks from 80 to 1 compared without TDM. Proposed digital filter calculated order and coefficients using Kaiser window function in Matlab, and implemented using very high speed integrated circuits hardware descryption language (VHDL). After applying to the telemetry system, we confirmed that the proposed digital filter was operating through the experimental results in the test environment.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.1
• /
• pp.55-63
• /
• 2000

This paper investigated the sub-region compression effect of the three dimensional DCT(3D-DCT) using the difference component(DC) of inter-frame in images. The proposed algorithm are the method that obtain compression effect to divide the information into subband after 3D-DCT, the data appear the type of cubic block(8${\times}$8${\times}$8) in eight difference components per unit. In the frequence domain that transform the eight differential component frames into eight DCT frames with components of both spatial and temporal frequencies of inter-frame, the image data are divided into frame component(8${\times}$8 block) of time-axis direction into 4${\times}$4 sub block in order to effectively obtain compression data because image components are concentrate in corner region with low-frequency of cubic block. Here, using the weight of sub block, we progressed compression ratio as consider to adaptive sub-region of low frequency part. In simulation, we estimated compression ratio, reconstructed image resolution(PSNR) with the simpler image and the complex image contained the higher frequency component. In the result, we could obtain the high compression effect of 30.36dB(average value in the complex-image) and 34.75dB(average value in the simple-image) in compression range of 0.04~0.05bpp.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.9
• /
• pp.50-55
• /
• 1999

In this paper we proposed a variable optical attenuator using the side polished fiber coupled with a refractive index matching liquid. Small variation of refractive index of matching liquid can induce very large change of optical loss due to the coupling between the fiber mode and radiation mode. The thermo-optic effect of matching liquid was used to ontrol the optical attenuation. The side polished fiber block was fabricated using the silicon V gloove. Experimental results showed that $5^{\circ}C$ temperature variation was enough to adjust full range attenuation. The polarization dependent loss and insertion loss of the fabricated devices were 0.5dB and 0.2dB respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.782-793
• /
• 2000

This paper presents a simple dynamical prediction scheme of the signal level which is attenuated and varied due to rain fading in satellite communication links using above 10GHz frequency bands. The proposed prediction scheme has four functional blocks for discrete-time low-pass filtering, slope-based prediction, mean-error correction and hybrid fixed/variable prediction margin allocation. Through simulations using Ka-band attenuation data obtained from the data measured over Ku-band by frequency-scaling, it is shown that the slope-based prediction with the mean-error correction has as small standard deviation of prediction error as below 1 dB, and that the error is about 1.5 to 2.5 times as small as that without the mean-error correction. The hybrid prediction margin allocation requires smaller average margin than those of both fixed and variable methods.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.139-144
• /
• 2016

This paper describes functional circuits of DC-DC converter IC incorporated with variable frequency PFM technique. In case of output voltage of DC-DC converter is reached setting value or output current is low then PFM switching frequency is slow down. In this work a PFM signal generator, a PFM Frequency Control Circuit, an output voltage detector and an over current protection circuits are designed. This device has been designed at a $0.35[{\mu}m]$, double poly, double metal 12[V] CMOS process.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.12
• /
• pp.3185-3193
• /
• 1998

ATM망은 망 내부의 큐잉 랜덤 지연에 의한 CDV의 발생으로 클럭복원의 문제를 안고 있다. 큐잉에 의한 지연은 여러 가지 파라메터에 의해 좌우되며 특히 망의 부하와 트래픽이 전송되는 교환기의 수에 의해 크게 좌우된다. CBR 트래픽의 경우 이를 해결하기 위해 SAR 헤더에 송신부의 클럭 정보를 담아 보내고 수신부에서는 이 정보를 바탕으로 송신부의 클럭을 복원하는 SRTS 기법을 사용하고 있다. 그러나 실시간성을 요하는 VBR 트래픽은 CBR과는 달리 대역폭의 가변적인 성질을 가지고 있으며 그 변화가 다양하여 SRTS 기법을 그대로 적용하기 곤란하다. VBR의 경우에 CBR 전송을 위한 SRTS 기법을 그대로 적용하면 주파수의 가변성으로 인해 망 클럭 주파수에 비해 매우 낮은 주파수의 경우에는 사이클이 상대적으로 많아 정보의 정확성이 떨어지게 된다. 이를 방지하기 위해 서비스 클럭의 주파수가 낮은 경우에는 망 기준 주파수를 낮게 하므로써 정확성을 증가시킬 수 있다. 또한, VBR 트래픽의 경우 AAL1에서는 SRTS의 필요성이 강조되지 않으나 단지 CDV를 제거할 방법이 요구되어진다. 따라서 AAL1의 SRTS를 CDV의 측정을 위한 메카니즘으로 바꾸는 것이 필요하며, 각 기반으로하여 Wavelet 변환을 이용한 VBR 트래픽의 클럭 복원방식을 제안한다. 제안된 알고리즘은 ATM망에서 VBR 영상 서비스를 위한 AAL 계층에 이용이 가능하다. 시뮬레이션 결과는 wavelet 변환 블록에서 출력되는 계수 값을 선택하여 전송함으로써 VBR 트래픽의 보다 다양한 QoS를 만족시킬 수 있음을 보인다.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.5
• /
• pp.1-10
• /
• 1998

Satellite communication is getting more important in the coming 21st century because of its wide areas sevice capability, ease of access, and fast channel establishment. As such, satellite communication networks will be the basis of the global communication system in cooperation with the ground ATM networks. In this paper, we consider an efficient transmission methodology of ATM cells over the satellite communication channel. We first analyze possible bottlenecks and performance deterioration factors in the case, and then propose an enhanced cell trasmission mechanism. In order to use satellite channel for ATM cell transmission, the application of complicated channel coding is inevitable. However, the forwared error control such as convolutional encoding brings forth burst errors, which calls for the application of some kind of interleaving mechanism to randomize the burst errors at the receiver. Another aspect which should b econsidered in satellite communication system is the inherent transmission delay, which can be very considered in satellite communication system is te inherent transmission delay, which can be very critical to the delay-sensitive ATM traffic. Therefore, we propose that the processing delay at the block interleaving stage should be controlled propose a variable-size block interleaving mechanism which utilizes the predicted transmission delay for each traffic in the queues of the transmitter. According to the computer simulation, the proposed mechanism could improve the overall performance by drastically reducing the ATM cell drop rate owing to the excessive transmission delay.