• Ocean and Polar Research
• /
• v.40 no.3
• /
• pp.115-125
• /
• 2018

Production from copepodite IV to adult of two euchaetid species Euchaeta plana and Paraeuchaeta russelli was measured at the southeastern sea of Korea from April to November, 2014. The mean density was $2.0ind\;m^{-3}$ for E. plana and $4.1ind\;m^{-3}$ for P. russelli, with the high contribution of copepodite V to total density. The densities of total individuals, adult females and eggs were highest in November for both species. The mean egg production rate (EPR) was $1.7eggs\;female^{-1}\;d^{-1}$ for E. plana and $3.1eggs\;female^{-1}\;d^{-1}$ for P. russelli. Both of them showed the highest EPR in September but zero EPR in summer. The mean weight-specific EPR was $0.038d^{-1}$ for E. plana and $0.079d^{-1}$ for P. russelli. The mean total production rates of E. plana and P. russelli were $5.3{\mu}g\;C\;m^{-3}\;d^{-1}$ and $17.8{\mu}g\;C\;m^{-3}\;d^{-1}$, respectively, with the largest production in November. The mean Production/Biomass ratio was $0.06d^{-1}$ for E. plana and $0.07d^{-1}$ for P. russelli, with its peak in September for both. The total production of E. plana and P. russelli was positively correlated with the density of a copepod Oncaea venusta, rather than chl-a concentration, indicating that the two copepods might be carnivores. This study evaluates the contribution of euchaetids to the copepod community in the southeastern sea of Korea.

• Korean Journal of Pharmacognosy
• /
• v.51 no.3
• /
• pp.222-229
• /
• 2020

Recently, consume for functional cosmetics containing natural products has been greatly increased. In order to develop it as a natural cosmetic material, we selected Ixeridium dentatum (Thunb.) Tzvelev, Plantago asiatica L. and Rumex crispus L. that have antioxidant and anti-inflammatory effects. In this study, simultaneous quantitative analysis of the isolated compounds and natural product complexes (Mix.) were validated using high performance liquid chromatography (HPLC). The isolated six compounds were shown in a large linearity with a correlation coefficient (R²) of 0.99. The limit of detection (LOD) of chlorogenic acid, plantamajoside, acteoside, emodin chrysophanol and physcion were 0.36 ㎍/mL, 0.36 ㎍/mL, 0.37 ㎍/mL, 0.30 ㎍/mL, 0.22 ㎍/mL and 0.12 ㎍/mL, respectively. The limit of quantification (LOQ) of chlorogenic acid, plantamajoside, acteoside, emodin chrysophanol and physcion were 1.10 ㎍/mL, 1.08 ㎍/mL, 1.12 ㎍/mL, 0.99 ㎍/mL, 0.66 ㎍/mL and 0.35 ㎍/mL, respectively. Content analysis showed chlorogenic acid (0.19 ± 0.02%), plantamajoside (0.48 ± 0.01%), acteoside (0.65 ± 0.01%), emodin (1.15 ± 0.11%), chrysophanol (0.73 ± 0.01%) and physcion (0.69 ± 0.09%). Therefore, the results of this study may provide for basic data of standardization research natural cosmetic material development on the I. dentatum, P. asiatica and R. cripus.

• Korean Journal of Materials Research
• /
• v.25 no.11
• /
• pp.636-641
• /
• 2015

Titanium has many special characteristics such as specific high strength, low elastic modulus, excellent corrosion and oxidation resistance, etc. Beta titanium alloys, because of their good formability and strength, are used for jet engines, and as turbine blades in the automobile and aerospace industries. Low cost beta titanium alloys were developed to take economic advantage of the use of low-cost beta stabilizers such as Mo, Fe, and Cr. Generally, adding a trace of boron leads to grain refinement in casted titanium alloys due to the pinning effect of the TiB phases. This study analyzed and evaluated the microstructural and mechanical properties after plastic deformation and heat treatment in boron-modified Ti-2Al-9.2Mo-2Fe alloy. The results indicate that a trace of boron addition made grains finer; this refinement effect was found to be maintained after subsequent processes such as hot forging and solution treatment. This can effectively reduce the number of required manufacturing process steps and lead to savings in the overall cost as well as low-cost beta elements.

• Applied Chemistry for Engineering
• /
• v.25 no.6
• /
• pp.553-558
• /
• 2014

Microalgae are a promising alternative feedstock for biodiesel production because their growth rates and oil contents are higher than those of conventional energy crops. Microalgal lipid is mainly triacylglyceride that can be converted to biodiesel as fatty acid methyl esters through trans-esterification. In this paper, the influence of several important lipid inducing factors such as nutrient limitation and changes in salinity and metallic components in microalgae and their potential strategies to be used for biodiesel production are reviewed. Depending upon strains/species that we use, microalgae react to stresses by producing different amount of triacylglyceride and/or by altering their fatty acids composition. Although the most widely applied method is the nitrogen starvation, other potential factors, including nutrient surplus conditions and changes in salinity, pH, temperature and metal concentrations, should be considered to increase biodiesel productivity.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.2
• /
• pp.97-105
• /
• 2015

Building information modeling (BIM)-based construction projects have increased and become more varied, and as such the management of BIM-based facility information is also increasingly important for facility maintenance. Information management, and specifically product data mapping, however, has some problems in the area of manual data entry and does not adequately consider the exchange requirements of facility maintenance. Therefore, it is necessary to introduce a method to improve the management of composite object information for BIM-based facility maintenance so that it can handle construction operation building information exchange (COBie) data for a composite object. Therefore, we present a method to map COBie data to related materials of a composite object. This research contributes to increasing the efficiency and accuracy of the required information mapping between a building model and product data using a BIM library through optimal BIM data adoption. Moreover, it allows for the creation and management of specific product data at the design development phase.

• Journal of architectural history
• /
• v.16 no.6
• /
• pp.47-66
• /
• 2007

$Lokap{\bar{a}}las$ are understood as the deities of four directions in Buddhism: $Dhrtar{\bar{a}}stra$ in the East, $Vir{\bar{u}}dhaka$ in the South, $Vir{\bar{u}}p{\bar{a}}ksa$ in the West and $Vai{\acute{s}}ravana$ in the North respectively. Their common name is, therefore, called as the "Four Guardian Kings", whose function is to prevent demonic forces from entering into its sacred world. Although the position of $Lokap{\bar{a}}las$ is to the lowest level in the hierarchy of the minor deities in Buddhism, the cult of $Lokap{\bar{a}}las$ was widely spread and prominent in the countries of Northern Buddhism. It played a significant role in terms of the state-protecting Buddhism, on behalf of it's esoteric and magic power. More than 20 Gateways of the $Lokap{\bar{a}}las$ and $Lokap{\bar{a}}la$ statues were still well preserved in Korea, and they were believed to be constructed after the Japanese attack in 1592. After war, monks had concentrated on restoring ruined temples and building many new Gateways of the Four Guardian Kings over the Korean peninsular. Under such circumstances, even though the $Lokap{\bar{a}}las$ played a significant role as the subject of cult in Korean Buddhism. they might have a small chance to be taught traditional Lama iconography exactly. The purpose of this essay is to examine the relation of orientation of the Gate way of $Lokap{\bar{a}}las$ and allocation of each Kings inside the gate.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.315-316
• /
• 2007

This paper presents a new methodology to improve movement database for a humanoid robot. The database is initially full of human motions so that the kinetics characteristics of human movement are immanent in it. then, the database is updated to the pseudo-optimal motions for the humanoid robot to perform more natural motions, which contain the kinetics characteristics of robot. for this, we use the evolutionary algorithm. the methodology consists of two processes : (1) the offline imitation learning of human movement and (2) the online generation of natural motion. The offline process improve the initial human motion database using the evolutionary algorithm and inverse dynamics-based optimization. The optimization procedure generate new motions using the movement primitive database, minimizing the joint torque. This learning process produces a new database that can endow the humanoid robot with natural motions, which requires minimal torques. In online process, using the linear combination of the motion primitive in this updated database, the humanoid robot can generate the natural motions in real time. The proposed framework gives a systematic methodology for a humanoid robot to learn natural motions from human motions considering dynamics of the robot. The experiment of catching a ball thrown by a man is performed to show the feasibility of the proposed framework.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.10
• /
• pp.1067-1073
• /
• 2011

This paper describes the performance of a centrifugal fan used for refuse collection systems according to the chord length of the splitters installed near the blade suction and pressure surface sides. The fan performance is analyzed by three-dimensional Navier.Stokes analysis and is compared to the results obtained experimentally. Throughout the numerical simulation of the fan with splitters, it is found that the reverse-flow region observed near the suction side of the blade can be reduced by installing a splitter. The fan performance is successfully improved by controlling the chord length of the splitter installed near the blade suction side. Under the designed flow condition, the efficiency and pressure of a fan with splitters increase by up to 4% and 18%, respectively, compared to the reference fan.

• Sijohaknonchong
• /
• v.44
• /
• pp.237-254
• /
• 2016

It is by presenting the how to read of Manhoengcheongnyu(만횡청류) in this article. Premise of how to read of Manhoengcheongnyu(만횡청류), the meaning of the lyrics is inconsequential. And yet reading, at the same time, it is a singing of drinking. Such characteristic is one that is found in reading substances and singing thereof. Premise of how to read of Manhoengcheongnyu (만횡청류), to the statement of the encounter and farewell between men and women when considering these points, 'Ijeneunmotbogedo(이제는못보게도~)' is reflected the heart of the speaker is called "do not want to parting". Speaker, want their own appearance has reached the lover through the children. Lover is the speaker can be left laughing would could spend laughing after all.

• Journal of architectural history
• /
• v.16 no.2
• /
• pp.59-78
• /
• 2007

Studies and reports on buddhist temples in Goryeo dynasty are rarely In the present situation. At this point of time new excavational reports and historic records offer many materials to understand a architecture in Goryeo period. Especially, temple site have various transitions, it is of great value to study. This article attempted a restorative study of a location, function, spacial arrangement, structure, building age is based on a measure and transition of temple layout that is based on the excavational result and related historic documents about Godal temple site in Yeoju. Gadal temple site was a representative Zen buddhist temple in Goryeo Dynasty. It was difficult of access by watercourse because it was located in an inland in the upper Han River. Archaeological research and historical records has reveals that the temple was constructed with a minium of four levels[six terms]. We could recognized the central site of temple and buildings were constantly established, enovated or collapsed. It has went through many transition according as it encountered new sects and doctrines. Also it should perform various functions and overcome given conditions. Ultimately it let see greater diversity in the spacial composition, and layout. That is to say it were planed several separate areas, each was consisted of main buildings, once again was integrated into one temple.