• Composites Research
• /
• v.36 no.5
• /
• pp.369-376
• /
• 2023

This study focuses on investigating the influence of epoxy polymer crosslinking density, a crucial aspect in composite material matrices, on the yield surface using molecular dynamics simulations. Our approach involved generating epoxy models with diverse crosslinking densities and subjecting them to both uniaxial and multiaxial deformation simulations, accounting for the elasto-plastic deformation behaviors. Through this, we obtained key mechanical parameters including elastic modulus, yield point, and strain hardening coefficient, all correlated with crosslinking conversion ratios. A particularly noteworthy finding is the rapid expansion of the yield surface in the biaxial compression region with increasing crosslinking ratios, compared to the uniaxial tensile region. This unique behavior led to observable yield surface variations, indicating a significant pressure-dependent relationship of the yield surface considering plastic strain and crosslinking conversion ratio. These results contribute to a deeper understanding of the complex interplay between crosslinking density and plastic mechanical response, especially in the aspect of multiaxial deformation behaviors.

• The Korean Journal of Rheology
• /
• v.7 no.3
• /
• pp.225-236
• /
• 1995

세가지 가교제 즉 황, tetramethyltyiuram disulfide (TMTD) 및 dicumyl peroxide(DCP)로 각각 가교시킨 카본블랙 충진 고분자 망상 시료들에 대해 일축연신 실험 을 통해 얻은 Mooney plot를 분석, 가교 탄성율 Gc와 엉킴 탄성율 Ge를 각각 구하였다. 각 가교계에 대하여 Gc를 통해서는 가교 사슬간의 평균분자량, 망상사슬과 카본블랙간 결합체 의 밀도 및 평균 면적 등을 Gc를 통해서는 카본블랙 첨가에 따른 관경비를 각각평가하였다. 황 가교제의 경우 Gc가 가장 높았으며 망상 사슬과 카본블랙간의 결합이 가장 잘 이루어졌 다. TMTD와 DCP가교제의 경우는 황의경우보다 카보블랙 입자와의 결합력은 낮았으나 결 합체들의 분포는 더욱 조밀하게 나타났다. 또한 Ge평가로부터는 TMTD 가교계가 카본블랙 충진에 의해 관경이 가장크게 증가함을 알수 있었다.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.657-664
• /
• 2001

In this study. the effects of ${\gamma}$-irradiation on the crosslinking of low density poly ethylene (LLDPE) and linear low density polyethylene (LLDPE) containing crosslinking agents were investigated to find the degree of crosslinking in the polymer. The LDPE and LLDPE specimens were prepared by blending crosslinking agents with each polymers, and by hot-press-molding into a sheet at 13$0^{\circ}C$. The ${\gamma}$-irradiation was conducted at 50 to 150 kGy in nitrogen. The crosslinking percentage in these specimens was measured in relation to the irradiation dose and the type of crosslinking agents. The mechanical properties, thermal properties and crystallinity of specimens were examined as a function of irradiation dose as well. It was found that the degree of crosslinking of the irradiated specimens was increased with increasing irradiation dose and by the addition of crosslinking agents. The mechanical properties and thermal properties of specimens were improved in proportion to an increase in the degree of crosslinking. The crystallinity of original resin was decreased with increasing crosslinking density.

• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.341-348
• /
• 1992

PVC was compounded with various crosslinking agents, plasticizers and acrylonitrile butadiene rubber(NBR) to evaluate their effects on the radiation gel percent, elongation at break, heat distortion and heat shrinkage. Gel yield of PVC increased with increasing unsaturation levels per molecular weight of crosslinking agents while PVC containing NBR was more sensitive to crosslinking than PVC itself regardless of the types of crosslinking agents and plasticizers. It was found that gel percent was increased with increasing radiation dose, while heat distortion was decreased with increasing gel percent. Heat shrinkage was increased with decreasing stretching temperature and increasing annealing temperature.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2004.05a
• /
• pp.341-344
• /
• 2004

본 연구의 목적은 cholesterol를 가교화 시켜 우유 및 유제품의 cholesterol을 효과적으로 제거하고, 이들의 재활용이 용이하게 되어지는 것을 규명하는데 있으며, 이를 이용해 cholesterol을 제거하고 재활용 하는데 문제가 되었던 점을 고려해 가교화 ${\beta}$-CD를 이용해 우유 및 유제품에서 cholesterol을 제거하고 재활용의 더 높은 효율을 위하여 실시되었다. 가교화 ${\beta}$-CD를 이용해 우유에서 cholesterol 제거 실험결과의 최적 조건은 가교화 ${\beta}$-CD 1%를 첨가해 교반온도 $10^{\circ}C$, 교반시간 10분, 교반속도 400rpm으로 실험한 결과 cholesterol 제거율이 평균 81.6%이었다. 또한 가교화 ${\beta}$-CD의 재활용율은 92%로 나타났다. 이 실험의 결과 ${\beta}$-CD의 가교화가 우유의 cholesterol제거와 재활용 면에서 긍정적인 것으로 사료되며 산업화의 가능성을 시사하였다.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2004.10a
• /
• pp.358-362
• /
• 2004

본 연구에서는 가교화 ${\beta}-CD$로 크림치즈의 콜레스테롤을 효과적으로 제거하는 실험을 수행 하였으며, 크림치즈의 이화학적 변화와 관능적 특성을 살펴보았다. 크림치즈를 만들기 위한 유지방 함량 36%의 크림을 가교화 ${\beta}-CD$로 처리 시 콜레스테롤 제거 최적 조건은 가교화 ${\beta}-CD$ 10%를 첨가해 교반온도 $20^{\circ}C$, 교반시간 30분, 교반속도 800rpm으로 실험한 결과 콜레스테롤 제거율이 평균 82.0%로 나타났다. 가교화 ${\beta}-CD$처리 크림치즈는 short-chain fatty acid의 경우 저장 기간이 지남에 따라 control과 powder ${\beta}-CD$ 처리한 크림치즈에 비해 저급 지방산 생성에 변화가 거의 없고, 쓴맛을 내는 아미노산의 경우 저장 기간 동안 control과 powder ${\beta}-CD$처리 크림치즈에 비해 생산량이 현저하게 적었다. 또한 가교화 ${\beta}-CD$처리 크림치즈의 조직검사에서 다른 항목에서보다 저장 기간 동안 응집성이 변함이 없으며 그 수치가 높게 평가되었다. 관능검사 결과, 가교화 ${\beta}-CD$처리 크림치즈는 저장 기간 동안 쓴맛의 증가가 거의 없었고 전체적인 기호도 또한 높았다. 위 실험 결과에 따르면, 가교화 ${\beta}-CD$ 사용결과 cholesterol 제거율이 높으며, 제품에 적용시 재활용이 가능하고 품질이 향상되므로 이를 유가공 산업에 활용이 가능할 것으로 기대된다.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2005.05a
• /
• pp.317-321
• /
• 2005

본 연구결과, 콜레스테롤 제거 크림치즈를 만들기 위한 유지방 함량 36%의 크림의 콜레스테롤 제거 최적 조건은 adipic acid로 가교시킨 ${\beta}-CD$ 첨가량 10%, 교반온도 $20^{\circ}C$, 교반시간 30분, 교반속도 800rpm 이었으며, 이 때 콜레스테롤 제거율은 평균 91.42%로 나타났다. 가교화 ${\beta}-CD$ 처리 크림치즈의 관능검사 결과, 가교화 ${\beta}-CD$ 처리 크림치즈는 control과 powder ${\beta}-CD$ 처리한 크림치즈에 비해 저장 기간 동안 쓴맛의 증가가 거의 없었고, 빵에 발리는 정도도 매우 우수하였으며, 전체적인 기호도 또한 높았다. short-chain fatty acid의 경우 저장 기간이 지남에 따라 가교화 ${\beta}-CD$ 처리 크림치즈는 control과 powder ${\beta}-CD$ 처리한 크림치즈에 비해 저급 지방산 생성에 변화가 거의 없었다. 조직검사에서 가교화 ${\beta}-CD$ 처리 크림치즈는 저장 기간 동안 control에 비해 응집성, 탄력성, 점착성의 변화가 없으며 그 수치가 높게 평가되었다. 또한 가교화 ${\beta}-CD$의 재활용률은 97.82%로 매우 높게 나타났다. 위 실험 결과에 따르면, 가교화 ${\beta}-CD$는 콜레스테롤 제거율이 높으며, 제품에 적용 시 품질이 향상될 뿐만 아니라, 재활용률도 높아 이를 유가공 산업에 다양하게 활용이 가능할 것으로 기대된다.

• 한국노년학
• /
• v.36 no.3
• /
• pp.541-562
• /
• 2016

The current study investigates the relationship and the mechanisms between bridge employment and change in marital satisfaction during midlife, using a three-wave panel dataset obtained from the Korean Baby Boomer Panel Study. A multivariate latent growth analysis reveals that the transition from career employment to bridge employment, compared to maintaining career employment, has an indirect negative effect on increase rate of marital satisfaction through the wage decrease. A steep decrease in wage following transition to bridge employment causes a lower increase in marital satisfaction. On the other hand, continuously engaging in bridge employment rather than career employment is associated with a higher increase in marital satisfaction via a higher increase in job commitment. This result implies that Baby Boomers adapt to bridge employment over time. Overall, the present study finds that the effect of bridge employment on the change in marital satisfaction during midlife varies with the duration of bridge employment. A future research needs to explore which factors can buffer the negative effect of decrease in wage during transition to the bridge employment on the change in marital satisfaction.

• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.91-95
• /
• 2005

The PVA hydrogels were prepared by the chemical and irradiation method to improve the heat resistance of these hydrogels at the high temperature. The physical properties such as the gel content, the degree of swelling and the gel strength for the synthesized hydrogels were examined. Gel content increased as the chemical reaction time and the irradiation dose increased, and gel content of the hydrogels were higher when the two-steps of chemical and irradiation method were used rather than only the chemical method. Gel strength increased as the chemical reaction time increased, and as the irradiation dose decreased. The hydrogels prepared by the chemical reaction for 5 hours and the two-steps had the heat resistance at the high temperature.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.410-416
• /
• 2007

Monodisperse polymer particles were prepared via one- step seeded polymerization using PMMA as seed particles, and HDDA, triEGDMA or EGDMA as crosslinking monomer. For the study, the effects of 1) the ratio of the absorbed monomer to the seed polymer particles (swelling ratio), 2) the characteristics of crosslinking monomer, 3) electroless Ni plating, and 4) electroless Au Plating on the variation of mechanical properties of polymer particles, such as recovery rate, K-values, breaking strength and breaking displacement were investigated by using MCT (micro compression test). It was observed that swelling ratio of polymer particles influenced only on breaking strength of polymer Particles, while electroless plating did on recovery rate, K-values ($K_{10}\;and\;K_{20}$) and breaking strength of electroless plated polymer particles. However, breaking displacement and K-values ($K_{30}{\sim}K_{50}$) were more or less insensitive to electroless plating.