• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.406-409
• /
• 2012

본 논문은 하이퍼텍스트 문서의 자동분류 성능을 높이기 위한 새로운 접근법을 제시한다. 하이퍼텍스트 문서는 일반 문서와 달리 하이퍼링크로 서로 연결된 구조를 가진다. 이 하이퍼링크 정보는 대상문서와 연관도가 높은 정보를 가지고 있으며, 이러한 링크 정보로부터 특징을 보다 잘 선별하기 위해서는 보다 정밀한 접근법이 필요하다. 본 논문은 단어간 의미 유사도를 기반으로 하이퍼텍스트 링크 정보를 활용한 특징 가공기법을 제안한다. 제안 기법은 하이퍼링크 문서로부터 대상문서와 연관도가 높은 특징을 추출하기 위해 단어간 유사도 함수를 사용하며, 유사도 함수는 워드넷의 상/하위어 관계를 이용한다. 그리고 추출된 특징들 중 의미적으로 비슷한 개념의 특징들을 합병함으로써 의미적으로 보다 견고한 분류 모델을 구축한다. 제안 기법을 검증하기 위해 Web-KB 문서집합을 이용하여 실험을 수행하였고 실험 결과 기존 방법보다 우수한 성능을 보였다.

• Journal of Technologic Dentistry
• /
• v.40 no.4
• /
• pp.231-237
• /
• 2018

Purpose: The development of the dental technology industry has digitized the dental process. Definition of Digitalization of Dental Implantation Digitalization is the process of model making and prosthodontic processing using 3D CAD and CAM. Currently, it is becoming popular due to the spread of various devices. However, precision evaluation at this stage is an important factor in precision-based dental procedures. Therefore, in this study, we want to analyze the precision of the processed body made with digital dental machine. Methods: The accuracy of digital dental pore devices was evaluated. Specimens were fabricated with 5 types of 3D printers. The external shape was measured with the prepared specimen. The surface roughness was measured. Results: As a result, precision was excellent in order of EP2 specimen, EP1 specimen, and EA2 specimen. The precision of EP3 specimen and EA1 specimen is not excellent. And the precision of the specimen processed with polymer 3D printer is excellent. The accuracy of LCPS type polymer 3D printers is considered to be excellent. Conclusion : 1. Observation of the shape The 3D printer for LCPS system and the 3D printer for SLM $40{\mu}m$ system were found to be precisely processed. 2. Surface roughness results The LCPS system polymer 3D printer has been shown to have a precise surface.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.7-7
• /
• 2019

우리나라에서의 대마는 마약류로 분류되어 기호용과 의료용 모두 법적인 제재를 받아왔으나 최근에 의료용 대마가 법적으로 허용이 되어 환자들에게 처방 받을 수 있게 되었다. 하지만 우리나라 사람들에게 대마는 환각성분을 가진 마약류로 깊이 인식되어 왔으며 의료용 대마에 대한 연구는 거의 전무한 실정이다. 노지재배에서 발생할 수 있는 범죄의 위험성, 자연교배에 의한 품질저하를 피할 수 있으며 재배조건(양액, 광조건, 광주기, 대기환경조성) 등을 제어할 수 있는 밀폐형 LED 식물공장은 의료용 대마 생산에 제일 적합한 모델이 될 수 있다. 식물체의 광합성은 가시광선 중 특정 파장 450nm 청색광과 660nm 적생광을 주로 이용하며 'LED (Light Emitting Diode) 발광다이오드'는 식물체의 광합성에 적합한 파장으로 광원을 조사할 수 있는 장점이 있다. 이러한 LED를 이용한 광합성은 식물체의 2차 대사물질 Anthocyanins, phenolic compounds 등의 향상과 생육에도 긍정적인 영향을 미치며 식물 뿐만 아니라 광합성을 하는 미세조류(micro algae)에서도 이용이 가능하며 해마토 코쿠스(Hematococcus)의 세포증식과 항산화물질 아스타잔틴(astaxathin)생산에 유용하게 쓰이고 있다. 최근 미국과 다른 나라에서도 기호용, 의료용 대마사업에 대한 관심이 높아지고 있으며 캐나다와 미국에서는 밀폐형 유리온실과 식물공장을 이용한 의료용 대마를 생산, 추출, 가공까지 하여 산업적인 영역을 넓히고 있는 실정이다. 특히, 실내재배에서는 광원이 필수적인 요소이며 식물생육에 선택적인 파장을 조사할 수 있는 LED와 재배조건을 정밀하게 제어할 수 있는 밀폐형 식물공장을 이용한 의료용 대마 생산에 대한 연구가 절실히 필요한 시점이다.

• Analytical Science and Technology
• /
• v.31 no.4
• /
• pp.149-160
• /
• 2018

A large number of functional living products are being produced for eco-friendly or health-promoting purposes. In the manufacturing process, such products could be adulterated with raw materials with high radioactivity, such as monazite and tourmaline. Thus, it is essential to manage raw materials and products closely related to the public living. For proper management, an accurate radioactivity data of the processed products are needed. Therefore, it is essential to develop a rapid and validated analytical method. In this study, the concentration of the radioactive $^{238}U$ and $^{232}Th$ in building materials (e.g., tile, cement, paint, wall paper, and gypsum board) and living products (e.g., health products, textiles, and minerals) were determined and compared by ED-XRF and ICP-MS. By comparing the results of both methods, we confirmed the applicability of the rapid screening and precise analysis of ED-XRF and ICP-MS. In addition, $^{238}U$ and $^{232}Th$ levels were relatively lower in building materials than in living products. Particularly, $^{232}Th$ content in 6 of 47 living products exceeded (maximum $8.2Bq{\cdot}g^{-1}$) the standard limit of $^{232}Th$ content in raw material ($1.0Bq{\cdot}g^{-1}$).

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.3
• /
• pp.199-204
• /
• 2010

Members used for the Korean traditional joints have been processed by handicraft, especially with domestic red pine species. Dovetail joint is most commonly used in woodworking joinery and traditional horizontal and vertical connections. It is able to be processed much easier to cut by handicraft and machines. However, although it is processed straight forwards, it requires a high degree of accuracy to ensure a snug fit. Also, tenons and mortises must fit together with no gap between them so that the joint interlocks tightly. A few scientific studies on the dovetail joints have been conducted so far. For the effective applications of traditional joints and domestic plantation wood species, dovetail joints were assembled by larch glulam members processed by machine pre-cut. To identify the tensile properties of through dovetail joints, larch glulam with 150 150mm in cross section were prepared. Furthermore, various geometric parameters of dovetai joints such as width, length, and tenon angle, were surveyed. The ends in the mortise was cracked mainly at a low strength level in the control specimens without reinforcements. The maximum tensile strengths of reinforced specimens considering real connections such as capital joint and headpiece on a column, increasedby handicraft, especially with domestic red pine species. Dovetail joint is most commonly used in woodworking joinery and traditional horizontal and vertical connections. It is able to be processed much easier to cut by handicraft and machines. However, although it is processed straight forwards, it requires a high degree of accuracy to ensure a snug fit. Also, tenons and mortises must fit together with no gap between them so that the joint interlocks tightly. A few scientific studies on the dovetail joints have been conducted so far. For the effective applications of traditional joints and domestic plantation wood species, dovetail joints were assembled by larch glulam members processed by machine pre-cut. To identify the tensile properties of through dovetail joints, larch glulam with 150 150mm in cross section were prepared. Furthermore, various geometric parameters of dovetai joints such as width, length, and tenon angle, were surveyed. The ends in the mortise was cracked mainly at a low strength level in the control specimens without reinforcements. The maximum tensile strengths of reinforced specimens considering real connections such as capital joint and headpiece on a column, increased by two times with shear failures on the tenon than the control specimens. The maximum tensile strength was obtained in the specimen of 25 degrees, and no difference was observed in the changes of neck widths.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.1 s.33
• /
• pp.37-44
• /
• 1991

In the plywood manufacturing factory established in 1979, female 3 workers who had exposed to adhesives containing formaldehyde for more than 48 months of duration suffered from eye, nasal, oral, throat and skin irritation and dyspnea as chief complaints. The actual level of the exposure to formaldehyde were not estimated when the exposed workers started to have above symptoms. The environmental monitoring of workplace was measured on April 25, 1990, and the concentration of formaldehyde revealed 0.2 ppm, however the exhaustive ventilatory system was already installed at that time. Twenty six subjects from entire factory were examined by questionnaire, physical examination and spirometry, etc. on August 22, 1990. Significant difference was observed in symptoms and signs of nasal, oral and throat irritation between the exposed group with longer duration and that with short duration. When the exposed group with longer duration was compared to the group of nonexposed, symptoms and signs of nasal, oral, throat and skin irritaion, chest tightness and dullness were significantly increased in the former group. The results of the spirometric test showed that the forced vital capacity and the forced expiratory volume at 1 second were decreased among the exposed group with longer duration but not significant.

• Korean Journal of Optics and Photonics
• /
• v.23 no.1
• /
• pp.12-16
• /
• 2012

In the paper, we fabricated a Ni master with $45^{\circ}$-mirror structures for flexible waveguide fabrication. The flexible waveguide films with embedded $45^{\circ}$-angled mirrors at the waveguide ends were successfully fabricated using a UV-imprint process. Next, in order to enhance the reflectivity of the mirrors, Ni(3 nm)-Au(200 nm) bilayers were evaporated on the $45^{\circ}$-angled facets through a locally opened thin mask using an electron beam evaporator. We measured propagation loss, bending loss, mirror loss and bending reliability of the fabricated waveguide.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.283-291
• /
• 2013

Rice varieties with suitable flour-making quality are required to promote rice processed-food industry and boost rice consumption in Korea. 'Namil (SA)-flo1' is an advanced mutant line with floury endosperm which shows good flour-making quality under dry-milling process. Genetic analysis was carried out to localize the chromosomal region responsible for the floury endosperm of 'Namil (SA)- flo1'. By using 94 F2 progenies, which were derived from 'Namil (SA)-flo1' ${\times}$ 'Milyang 23', floury grains percentage was investigated as phenotypic data, and genotyping was conducted with 54 SSR markers. Association analysis showed that the target genetic region for floury endosperm is on middle-low region of chromosome 5. Through further association analysis with increased number of SSR markers on chromosome 5, we found that genotypic variation in RM164 explains 79.7% of the variation in floury grains percentage of F2:3 seeds. The floury endosperm locus was localized on 17.7-20.7 Mbp region of chromosome 5 and will be further analyzed for fine mapping and gene identification.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.87-87
• /
• 2017

농산물의 품질 및 성분을 측정하는데 있어 기존의 화학적 분석 방식은 정밀도가 높으나 측정에 소요되는 시간과 비용이 많이 들어, 현장 적용하기에는 한계가 있다. 일반적으로 근적외선 분광 분석(Near Infra Red Spectroscopy, NIRS) 방법은 가공 과정에 따라 빠르게 변화되는 단백질 조성 및 수분함량 측정 등에 이용되고 있다. 분석에 소요 시간이 많이 걸리는 켈달법(Kjeldahi method)에 비해 NIR 분광 분석을 통한 보정으로 연속적인 모니터링이 가능하다. 본 연구에서 사용된 시료를 고정시키기 위한 프레임을 제작한 후 NIR센서와 광원인 LED의 각도를 고정시키고 측정 대상체인 사절된 감자 크기에 따라 시료를 고정시킬 수 있는 프레임을 반사면에 위치시켰다. 확산 반사법을 이용하여 프레임에 씨감자 시료를 고정 시킨 후 백색 LED를 이용하여 감자 표면에 빛을 반사시켜 3일 동안 12시간 마다 해당 시료들(열처리, 비누용액 침지, 생감자)의 스펙트럼을 측정하였다. 해당 시료들은 측정 기간 동안 저온상태($4^{\circ}C$)와 실온상태($20^{\circ}C$)에서 보관되었다. 실험 결과는 파장대 145nm에서 저온상태에서 보관된 생감자는 시간경과에 따른 흡광도의 결정 계수값($r^2$)은 0.98 이었다. 이는 감자가 저온에서 생감자의 상태 변화가 일어나고 있다는 것을 의미하고 파장대 145nm에서 시간에 따른 저온상태에서 보관한 감자의 상태 변화 예측이 가능함을 의미한다. 비누용액에 침지시킨 후 실온에 보관한 감자는 시간이 경과함에 따라 파장이 증가함에 따라 흡광도가 증가하였다. 이는 감자에 들어있는 Polyphenol Oxidase 함량 변화로 갈변 현상이 일어난 것을 알 수 있다. 또한 실온에서 보관한 생감자도 시간 경과에 따라 갈변 현상이 일어났지만 용액에 침지시킨 감자보다는 갈변 현상이 36시간 이후로 발견되었다. 열처리 후 실온에서 보관한 감자의 경우에는 갈변현상이 나타나지 않았다. 저온상태에서 보관한 감자시료들 모두 갈변형상이 나타나지 않았지만, 24시간이 지난 후 용액에 침지시킨 감자는 갈변 현상이 발생되었다. 생감자와 열처리한 감자는 시간 경과에 따른 갈변현상이 일어나지 않았으므로, 감자의 갈변현상은 감자의 표면 처리 방법에 국한되지 않고 온도에 영향을 더 많이 받는다는 것을 나타내고 있다. 본 연구는 향후 감자의 품질 및 성분 측정에서 간편하게 사용될 수 있는 감자의 품질 계측 기술에 기여할 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.334-341
• /
• 2016

In this paper, the study of a waveguide aperture-coupled feed-structured antenna has been conducted for the purpose of applying it to a wireless back-haul system sufficient for high-capacity gigabits-per-second data rates. For this study, a $32{\times}32$ waveguide slot sub-array antenna with a corporate-feed structure was designed and produced. Also, this antenna is used at 57 GHz to 66 GHz in the V-band. The construction of the antenna is a laminated form with radiating parts (outer groove and slot, cavity), a coupled aperture, and feeds in each. The antenna was designed with HFSS, which is based on 3D-FEM, produced with aluminum processed by a precision-controlled milling machine, and assembled after a silver-plating process. The measurement result from analysis of the characteristics of the antenna shows that return loss is less than -12 dB, VSWR < 2.0, and a wide bandwidth ranges up to 16%. An overall first side lobe level is less than -12.3 dB, and a 3 dB beam width is narrow at about $1.85^{\circ}$. Also, antenna gain is 38.5 dBi, offering high efficiency exceeding 90%.