• Title/Summary/Keyword: 가공율

Search Result 1,099, Processing Time 0.027 seconds

Effects of Temperature on Removal Rate in Cu CMP (Cu CMP에서 온도가 재료 제거율에 미치는 영향)

  • Park, In-Ho;Lee, Da-Sol;Jeong, Seon-ho;Jeong, Hae-do
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.17 no.6
    • /
    • pp.91-97
    • /
    • 2018
  • Chemical mechanical polishing(CMP) realizes a surface planarity through combined mechanical and chemical means. In CMP process, Preston equation is known as one of the most general approximation of the removal rate. Effects of pressure and relative speed on the mechanical property of Cu CMP has been investigated. On the other hand, The amount of abrasion also increased with changes in pressure and speed, resulting in a proportional increase of temperature during CMP. Especially this temperature is an important factor to change chemical reaction in a Cu CMP. However, when the slurry temperature became higher than $70^{\circ}C$, the removal rate went lower due to abrasives aggregation and scratching occurred on the Cu film. Therefore, it was found that the slurry temperature should not exceed $70^{\circ}C$ during Cu CMP. Finally, authors could increase the pressure, speed and slurry temperature up to a ceratin level to improve the removal rate without surface defects.

The Status of Production and Processing of Fruits and New Processing Technology (과실류의 생산 및 가공현황과 신가공기술)

  • 윤광섭;김순동
    • Food Science and Preservation
    • /
    • v.6 no.4
    • /
    • pp.521-529
    • /
    • 1999
  • The high influx of imported fruits into Korea is threatening to price and quality competition of domestic fruits. This investigation was conducted to raise price and quality competition of domestic fruits and to develop new products. The scale of production and processing, amount of processing and new processing technology were discussed. The area of cultivation land as well as the rate of processing is decreasing annually, an item of processing is limited to several kinds. Accordingly in this study, the status of production and manufacturing of some fruits and the new processing technologies such as high voltage pulsed electric fields, high hydrostatic pressure, ohmic heating, membrane separation and microwave treatment have investigated to fruit processing. Consequently, the minimal processing technology has to take advantage of various agricultural products in the food industry.

  • PDF

Changes on Abrasion Property of Warp Knitted Fabric for Footwear with Various Finishing Agents (가공제 처리에 따른 신발용 경편성물의 마모특성 변화)

  • 전연희;정원영;안승국
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 2003.04a
    • /
    • pp.115-118
    • /
    • 2003
  • 편성물은 루프형태로 얽혀있는 조직의 구조적 특성상 제편 과정에서 필요한 형태로의 성형이 용이해서 제품의 다양화를 기대할 수 있고 우수한 신축성과 드레이프성, 공기함유율, 구김안정성 둥이 우수하여 인체의 여러 가지 활동에 따른 구속감이 적어서 의류용 뿐만 아니라 신발 소재, 산업용 보강제등 그 활용도가 아주 높은 소재이다. 특히 경편성물은 직물과 편성물의 중간체적인 성향을 나타내고 있어서 제품생산시간을 단축할 수 있고 질적인 면에서도 직물과 아주 유사하여 후가공 처리에 유용한 소재이다[1]. (중략)

  • PDF

Characteristics of Intracavity SHG for the DPSSL with Linear Cavity (선형공진기를 갖는 DPSSL의 Intracavity SHG 특성)

  • 석성수;박덕규;이성만;윤미정;김용기;김선국;정도영;차병헌;김철중
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2002.07a
    • /
    • pp.70-71
    • /
    • 2002
  • 다이오드 여기 고체레이저(DPSSL, Diode-Pumped Solid State Laser)는 레이저 마킹기, 미세가공기, Ti:sapphire 및 각종 레이저 매질 여기, 의료기기, 그리고 군사용 계측기 등에 다양하게 사용되고 있다. 이러한 응용분야들에 효과적으로 사용되기 위해서는 레이저 출력, 빔모드, 펄스폭, 파장 등이 응용분야에 적합하도록 설계되어야 하며, 고반사율을 갖는 금속의 가공 및 마킹, 그리고 몇가지 레이저 매질의 여기원으로 사용되기 위해서는 짧은 펄스폭과 고품질을 갖는 녹색 파장의 DPSSL 개발이 필요하다. (중략)

  • PDF

새로운 재생셀룰로오스 섬유$(enVix{\circledR})$의 직접 염료에 대한 염색성

  • 심우섭;고준석;김성수;김재필;김익수
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • 2003.04a
    • /
    • pp.78-82
    • /
    • 2003
  • 셀룰로오스계 재생섬유 중 가장 먼저 개발된 Viscose rayon은 셀룰로오스 펄프를 17-18%의 가성소다 수용액에 팽윤시켜 알칼리 셀룰로스를 만든 뒤 이황화탄소(CS$_2$)에 반응시킨 후 방사하여 제조하며 흡습성, 제전성, 드레이프성 및 광택이 우수한 쾌적성 섬유이다. 그러나 탄성 회복율이 좋지 않으며 강력이 적고 특히 습윤시의 강력 저하의 단점이 있을 뿐만 아니라 제조과정에서 사용하는 이황화탄소의 환경 유해성이 큰 문제점으로 지적되고 있어 선진국들이 점차 설비를 폐쇄하거나 개도국으로 이전하고 있는 실정이다. (중략)

  • PDF

PE/PP Blend형 fiber/Filler 보강 복합 성형체

  • 강영구;조명호
    • Proceedings of the Korean Institute of Industrial Safety Conference
    • /
    • 2002.11a
    • /
    • pp.166-171
    • /
    • 2002
  • 폐자원의 재활용은 현재 미래산업을 발전시키는데 중요한 변수로 작용하고 있으며, 폐플라스틱의 경우 통신 케이블 덕트, 고속전철용 케이블 덕트, 선박용 구조체등 고부가가치 제품으로의 기술개발이 활발히 진행되고 있다. 폐 Polyolefin 계열의 수지는 성형가공이 적절한 MFI(Melt flow index)와 뛰어난 기계적 물성, 가공 성형성 등으로 인해 다양한 형태와 용도로 recycling되고 있으나, 재생시 다수 Grade에 의한 분별, 분리수거의 어려움, 상용성결여, 난연성 부재 그리고 70% 대의 기계적 물성 회복율로 인해 그 용도가 제한되고 있는 실정이다.(중략)

  • PDF

링 인장 시험에서의 마찰계수의 영향 분석

  • 배봉국;구재민;김형익;이영민;석창성
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2004.05a
    • /
    • pp.88-88
    • /
    • 2004
  • 내압을 받는 압력관의 파괴는 원주방향의 응력이 주된 요인이므로, 압력관의 안전성을 평가를 위해서는 원주방향의 인장특성을 아는 것이 필요하다. 소형 압력관의 인장특성을 평가할 때, 정확한 원주방향의 인장특성을 알기 위해서는 관으로 가공된 후의 재료로 시험해야 하지만, 부피의 제약으로 인하여 원주방향으로의 표준 인장시험편을 제작하지 못하므로 가공하기 전의 재료의 물성치를 사용하고 있다. 이를 개선하고자 원주방향의 인장특성을 평가하기 위한 방법의 하나로 링 시험법(ring test)이 있다.(중략)

  • PDF

Effect of various processes on the evolution of through thickness strain states and textures in aluminum sheets (알루미늄 판재에서 두께층에 따른 변형율 상태와 집합조직의 발달에 미치는 다양한 공정의 영향)

  • Nah, J.J.;Kang, H.G;Huh, M.Y.
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 2007.10a
    • /
    • pp.87-90
    • /
    • 2007
  • The evolution of texture and microstructure was tracked for a number of differently cold rolled aluminum sheet and through-thickness layers which were differentiated by different strain states upon preceding deformation. The results substantiate a correlation of deformation texture with the amount of shear applied during cold rolling.

  • PDF