We checked the conditions and material properties after producing the lime finishing layers with a mortar mix of processed lime. In addition, we reproduced the lime finishing layers of the Koguryo Tomb Murals, colored the layers with a few different techniques and identified the characteristics for each painting technique. As a result of the experiment, we could infer the producing techniques as well as teaming the conditions and properties of the lime finishing layers of the Koguryo tomb murals, and examined the maintenance of the lime finishing layers. Of those samples produced under various conditions, the layers of slaked lime, which were obtained after being hydrated underground for a long time, showed quite a good condition. Thus the slaked lime mixes produced through particular hydration methods are judged to increase the maintenance of the lime finishing layers of the Koguryo Tomb Murals. Mostly, the paints of Koguryo Tomb Murals indicated that they have similar conditions with the samples produced with a secco method. In addition, Considering the compositional forms of the painting layers and the boundary layers which formed between the painting layers and the finishing layers, we can verify that, in some cases, the conditions of the painting layers of the Koguryo tomb murals are similar to those which were produced with a combination of fresco and secco.
Studies on ancient ironmaking technologies are primarily based on archaeological surveys and scientific analysis data, and technological systems are examined by comparing the results of restorative experiments. In this study, to examine the ancient iron production technologies such as smelting and smithing in the Jungwon area, a restoration experiment was conducted based on archaeological data, and the iron and slag, etc. produced in the experiment were analyzed. Further, the changes in physicochemical properties due to the smelting of the raw material, specifically, iron ore were determined, and the smithing process, which involves fabrication of ironwares, was analyzed along with the characteristics of each step. In the case of smelting, increasing recovery rates and production of high-quality primary iron material were important for the following processes. For the iron bars produced through the smithing process, it was found that quality improvements made by reducing physical defects such as inclusions or gas holes were more important than the composition of the iron itself. The study also yielded comparative study data for various byproducts, such as smithing slag, which could be utilized in other ironmaking technology studies.
The antimicrobial activity of Orixa japonica Thunb. leaf extract towards 13 microorganism strains was evaluated. Both methanol (MEex) and 70% ethanol extracts showed antimicrobial activity towards Streptococcus mutans, Bacillus cereus, Staphylococcus aureus, and Pseudomonas aeruginosa. MEex showed a higher antimicrobial activity than the 70% ethanol extract. In addition, the dichloromethane fraction (DCMfr) of the MEex also had an antimicrobial effect against the microorganisms examined. The minimum inhibitory concentrations (MICs) towards S. mutans, B. cereus, S. aureus, and P. aeruginosa were 49.22, 24.61, 49.22, and 49.22 mg/mL, respectively. In contrast, the MICs of the DCMfr tpwards S. mutans, B. cereus, S. aureus, and P. aeruginosa were 3.31, 0.21, 1.7, and 1.7 mg/mL, respectively. The MEex antimicrobial activity was not affected by a 3 h exposures to pH in the range of 3-11 or by temperatures were maintained between $80^{\circ}C-100^{\circ}C$ for 6 h. However, the MEex antimicrobial activity decreased at a heat treatment of $121^{\circ}C$ 1 h.
Journal of the Korea Academia-Industrial cooperation Society
/
v.19
no.10
/
pp.648-654
/
2018
In order to maintain manholes installed on the road, the manhole should be easy to open and close. Manhole covers under harsh conditions require that they can be lifted when attempting to open the manhole because the frame and cover are stuck and difficult to open and close. In this study, the design of a lifting mechanism was carried out to improve and integrate the locking type manhole. The mechanism of the locking manhole is that when the bolt located at the center is turned, the hub connected with the bolt descends, and the hook connected to the hub is rotated. The end of the hook is hooked to the manhole frame. The auxiliary device was installed on the hook so that the manhole cover can be lifted. The structure was designed to endure about 300kg of lifting force based on 70% of the yield stress of the hook to perform lifting function. The shape design was performed through the structural analysis using the finite element method. First, the basic design was performed with the simplified 2-dimensional model and the attachment position and shape were designed through the 3-dimensional model. In order to find out the structural problems of the designed shape, the scale downed model was fabricated through 3D printing and confirmed that the lifting function worked. Finally, it was confirmed that both the locking and the average lifting of about 6.1 mm can be done by applying the lifting mechanism through the machining and applying it to the existing locking manhole.
Kim Gye-Hong;Oh Won-Zin;Lee Kune-Woo;Seo Bum-Kyoung
Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
/
v.3
no.3
/
pp.159-165
/
2005
The characterization of radiological contamination inside pipes generated during the decommission of a nuclear facility is necessary before pipes can be recycled or disposed. But, existing direct measurements of radioactive contamination level using the survey-meter can not estimate the characteristic of contamination on a local area such as the pipe inside. Moreover, the measurement of surface contamination level using the indirect methods has many problems of an application because of the difficulty of collecting sample and contamination possibility of a worker when collecting sample. In this work, plastic scintillator was simulated by using Monte Carlo simulation method for detection of beta radiation emitted from internal surfaces of small diameter pipe. Simulation results predicted the optimum thickness and geometry of plastic scintillator at which energy absorption for beta radiation was maximized. In addition, the problem of scintillator processing and transferring the detector into the pipe inside was considered when fabricating the plastic detector on the basis of simulation results. The characteristic of detector fabricated was also estimated. As a result, it was confirmed that detector capability was suitable for the measurement of contamination level. Also, the development of a detector for estimating the radiological characteristic of contamination on a local area such as the pipe inside was proven to be feasible.
I concluded as follows after analyzing the problem of the curriculum in the Department of Optical Science at a college of professional education for the purpose of training desireable opticians. The years required for competing a course of study at the Department of Optical Science at a college of professonal education have to be extended from the present two school years to three years for the short run and have to be extended to four years for the long run. The distribution ratio of subjects in the slate examination should be readjusted and the field of contect lens. Also the system of the slate examination should strengthen by adding practical processing test with the present selective written examination. The Curriculum of department of Optical Science curriculum at a college of professional education should be reorganized reinforce experiment and practice, namely, the subject for experiment and practice, such as Making of specific glasses and Test method of phorpter etc, should be reinforced. The knowledge for goods should be included in clinical training and it is reasonable to constitute the theory vs the practice in the ratio of five to five. The number of the Department of Optical Science should be increased two or more for per forty students and it is desirabled that only the professors who major optical Science or opthalmic medical science, or have Optician Licence should give lecture. The experiment a practice should be enlarged and it is necessary to secure or to adopt practice hours, practice site, machinery and parts, practice assistant and etc. It is reasonable that clinical training include the knowledge of goods, business practice and etc. and that a practice examiner has the qualification as an optician who has education background higher that the college of professional education.
Journal of the Korea Academia-Industrial cooperation Society
/
v.17
no.7
/
pp.334-341
/
2016
In this paper, the study of a waveguide aperture-coupled feed-structured antenna has been conducted for the purpose of applying it to a wireless back-haul system sufficient for high-capacity gigabits-per-second data rates. For this study, a $32{\times}32$ waveguide slot sub-array antenna with a corporate-feed structure was designed and produced. Also, this antenna is used at 57 GHz to 66 GHz in the V-band. The construction of the antenna is a laminated form with radiating parts (outer groove and slot, cavity), a coupled aperture, and feeds in each. The antenna was designed with HFSS, which is based on 3D-FEM, produced with aluminum processed by a precision-controlled milling machine, and assembled after a silver-plating process. The measurement result from analysis of the characteristics of the antenna shows that return loss is less than -12 dB, VSWR < 2.0, and a wide bandwidth ranges up to 16%. An overall first side lobe level is less than -12.3 dB, and a 3 dB beam width is narrow at about $1.85^{\circ}$. Also, antenna gain is 38.5 dBi, offering high efficiency exceeding 90%.
Kim, So-Young;Kim, Ju-Hee;Kim, Hyoun-Ja;Cho, Young-Sang
Journal of Korean Society of Environmental Engineers
/
v.27
no.3
/
pp.247-252
/
2005
The typical treatment method for fluoride polluted water is the flocculation and precipitation method which usually is capable of reducing the fluoride concentration down to the level of about 10 ppm. However, this method is no longer effective for the treatment of contaminated water having less than 10 ppm of fluorides. To remove fluorides in polluted water from the fluoride concentration between 1 to 10 ppm, several adsorbents were prepared mainly based on an activated alumina and the fluoride removal efficiencies of the adsorbents were analyzed. The best fluoride removal efficiency was obtained when the activated alumina treated by sulfuric acid was used as the adsorbent. A proper calcination temperature for the sulfuric acid contained activated alumina was found to be about $500^{\circ}C$. An adsorption isotherm for the adsorbent was also obtained by using Freundlich model. The values of the constants in Freundlich isotherm model were calculated to be K=6.63 and 1/n=0.29 based on the results obtained from the series of batch type adsorption experiments.
There is a limitation to estimate vitamin $B_{12}$ intake due to a lack of data on vitamin $B_{12}$ content in many Korean foods. In this study, vitamin $B_{12}$ content was determined in some seaweeds, fish, and shellfish and their product that are consumed in Korea using a modified microbioassay with Lactobacillus delbruecki ATCC 7830. Dried laver and dried seasoned and toasted laver contained very high levels of vitamin $B_{12}$ (66.8 and $55.2-71.3\;{\mu}g$/100 g, respectively. Sea lettuce and seaweed fulvescene also contained high vitamin $B_{12}$ content of 5.47-9.41 and $6.46-7.20\;{\mu}g$/100 g, respectively, whereas sea mustard and sea tangle contained low levels of vitamin $B_{12}$; vitamin $B_{12}$ was not detected in seaweed fusifome. Pacific saury, trout, sea-bass, or squid contained 12.01, 2.00, 0.49 and $2.33\;{\mu}g$ vitamin $B_{12}$/100 g, respectively. Ochellatus octopus, and naked sand lance contained 0.72-1.43 and $3.68\;{\mu}g$ vitamin $B_{12}$/100 g, respectively. Dried Alaska pollack con-tained $0.19-2.64\;{\mu}g$ vitamin $B_{12}$/100 g. Shellfish such as little neck clam and small ark shellfish contained high levels of vitamin $B_{12}$ of $30.5-40.5\;{\mu}g$/100 g, and mussel and abalone contained 17.71 and $7.82\;{\mu}g$/100 g, respectively. Of unique Korean traditional fermented seafood products, salt-fermented products of squid ($2.91\;{\mu}g$/100 g), clams ($34.31\;{\mu}g$/100 g), Ala-ska pollack roe ($9.98-12.02\;{\mu}g$/100 g), hairtail guts ($4.58\;{\mu}g$/100 g) or small shrimp ($0.58-1.55\;{\mu}g$/100 g), and fish sauce from anchovies ($1.52-1.78\;{\mu}g$/100 mL), sand eel ($0.22-0.24\;{\mu}g$/100 mL) or small shrimp ($0.19-0.78\;{\mu}g$/100 mL) were analyzed. A few commercial brands of flying fish roe ($0.73-1.73\;{\mu}g$/100 g), canned tuna ($0.40\;{\mu}g$/100 g), and fried fish paste ($0.25-0.69\;{\mu}g$/100 g) were also analyzed. In conclusion, vitamin $B_{12}$ content in these foods, chosen considering the Korean food culture, should contribute to improve the present vitamin $B_{12}$ food database. It may be helpful to estimate vitamin $B_{12}$ intake more correctly than before, and provide additional information for dietary education related to vitamin $B_{12}$ and meal management.
Proceedings of the Korea Information Processing Society Conference
/
2007.05a
/
pp.540-543
/
2007
최근의 그리드 컴퓨팅 시스템 환경은 단일 환경에서 작게는 2~4CPU, 많게는 수백 CPU 이상의 시스템으로 구축되고 있고, 더욱이 지역적으로도 멀리 떨어져 있다. 따라서 이를 운용하는 기업에서는 시스템의 사용 현황을 신속하게 분석할 필요가 있다. 그러나 이렇게 혼재된 이 기종 및 컴퓨팅 환경하에서의 각 지역별 시스템 사용현황을 효과적으로 분석 한다는 것은 매우 어려운 일이다. 기존에 사용되어 온 그리드 컴퓨팅 시스템 환경에서의 사용율 관리 방법들은 Queueing 시스템이 가지고 있는 Accounting 분석 명령어로 text 형태의 Accounting raw data 의 결과를 추출하여 가공 처리하므로 데이터 증가 시 반응 속도가 현격하게 느려지는 상황이 발생한다. 또한 원격지 그리드 컴퓨팅 시스템 군의 사용율 분석은 데이터 분석 시 매번 원격지접근 절차를 사용하여 그리드 컴퓨팅 시스템 군에 접근한 후 해당 로컬 시스템 분석을 해야 하고 각 원격지시스템군별로 추출 된 데이터를 통합 관리해야 하는 문제점을 가지고 있다. 따라서 이러한 문제점을 해결하고자 하는 것이 본 논문에서 제안하는 3-tier 구조의 GSA(Grid System Account)이다. 제안한 GSA 는 각 원격지 별 데이터를 객체화하여 Database 에 저장 함으로써 데이터 분석 시 효과적으로 처리할 수 있으며, 다수의 원격지 그리드 컴퓨팅 시스템 군에 대한 복합적인 분석이 필요할 때 효율적으로 대처할 수 있다. 본 논문에서는 GSA 의 설계방법을 제안하고 구현하여 실 성능을 시험함으로써 보다 효율적인 그리드 컴퓨팅 시스템의 사용율 분석 관리가 가능함을 보였다.포는 감수성을 보이지 않았다. 따라서 위의 결과로부터 SLT-I에 감수성을 보이지 않은 Raw264.7세포를 대상으로 Gb3 발현 정도와 SLT-I의 세포독성의 관계를 규명하고자 Gb3의 발현을 증가시킨 후 SLT-I의 세포독성을 재차 평가하였다. 이 결과 $TNF-{\alpha}$의 처리에 의하여 6 hrs에 Gb3의 발현이 정점(43.5%)에 이르렀으며 36 hrs에 정상 수준(25.0%)으로 환원되었다. 그러나, Gb3의 발현이 증가함에도 불구하고 SLT-I의 세포독성에는 변화가 관찰되지 않았다. 따라서, SLT-I에 의한 세포독성은 세포의 종류에 따라서 다르며 또한, Gb3의 발현정도에만 의존적이지는 않을 것으로 생각된다. 이와 같은 결과는 E. coli 0157의 감염증 병인 연구에 있어 SLT-I과 Gb3의 발현의 상관관계에 대한 보다 심도 있는 연구가 필요함을 시사한다.만 분할률, 배반포 형성률 및 배반포의 세포수를 증가시키는 것으로 사료된다.수의 유출입 지점에 온도센서를 부착하여 냉각수의 온도를 측정하고 냉각수의 공급량과 대기의 온도 등을 측정하여 대사열의 발생을 추정할 수 있었다. 동시에 이를 이용하여 유가배양시 기질을 공급하는 공정변수로 사용하였다 [8]. 생물학적인 폐수처리장치인 활성 슬러지법에서 미생물의 활성을 측정하는 방법은 아직 그다지 개발되어있지 않다. 본 연구에서는 슬러지의 주 구성원이 미생물인 점에 착안하여 침전시 슬러지층과 상등액의 온도차를 측정하여 대사열량의 발생량을 측정하고 슬러지의 활성을 측정할 수 있는 방법을 개발하였다.enin과 Rhaponticin의 작용(作用)에 의(依)한 것이며, 이
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.