• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.487-492
• /
• 1998

Ultrafine particles of $SnO_2$ or $(Sn,Ti)O_2$ and thin films of $SnO_2$ were synthesized by introducing aqueous tin chloride solution into a high temperature argon inductively coupled plasma (ICP) generated under ambient pressure (the spray-ICP technique). As-deposited $SnO_2$ particles from each concentration of solution were all tetragonal $SnO_2$ crystallline phase and their mean size decreased in proportion to the increase of solution concentration. The mean size of $SnO_2$ particles was in the 10~40 nm range.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.3
• /
• pp.677-689
• /
• 2013

Recently, the supplying of basic materials for construction of building as sand is big issues due to lack of shoreside supply. For solving this problem, many suppliers attempt to gather aggregate from the sea bottom of the EEZ & west coastal area of Korea. In this regard, the 'Jangantoe' which exists in the westside of the Daesan port is worth noticing as good seasand supplying areas. The Chungnam Aggregate Association have plan to gather of seasand from 'Gaduckdo 5 regions & Igok 3 regions' which lies westside about 6 miles off from the Jangantoe areas. This designated area also locates upper parts of the Gadaeam TSS(Traffic Separation Scheme) which is very useful passing routes for the sailing vessels of Inchon & Daesan ports. In this study, the evaluation of the safety for passing vessels in the vicinity of the seasand gathering area was performed by various methods of radar observations & GICOMS AIS data for marine traffics and vessel traffic-flow simulation of the 'Marine Traffic Safety Diagnostic Scheme'. By the results of this evaluation, I suggested comprehensive countermeasures for the safety of passing vessels in the near the seasand gathering area.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.4
• /
• pp.180-186
• /
• 2013

An electric vehicle is an environment-friendly automobile which does not emit any tailpipe pollutant. In a conventional vehicle with an internal combustion engine, the internal cabin of the vehicle is usually heated using waste heat from the engine. However, for an electric vehicle, an alternative solution for heating is required because it does not have a combustion engine. Recently, a heat pump system which is widely used for residential heating due to its higher efficiency has been studied for its use as a heating system in electric vehicles. In this study, a heat pump system utilizing air source and waste heat source from electric devices was investigated experimentally. The performance of the heat pump system was measured by varying the mass flow rate ratio. The experimental results show that the heating capacity and COP in the dual heat source heat pump were increased by 20.9% and 8.6%, respectively, from those of the air-source heat pump.

• KSBB Journal
• /
• v.29 no.5
• /
• pp.307-315
• /
• 2014

Recently seaweed polysaccharides have been extensively studied for alternative energy application. Because their producing cost is high and efficiency low, their industrial applications have been limited. The main component of cell wall of red algae represented by Gelidiales and Gracilariales is agar. Red-algae agar or galactan, consisting of D-galactose and 3, 6-anhydro-L-galactose, is suitable for bio-product application if hydrolyzed to monomer unit. For the hydrolysis of algae, chemical or enzymatic treatment can be used. A chemical process using a strong acid is simple and efficient, but it generates together with target sugar and toxic compounds. In an enzymatic hydrolysis process, target sugar without toxic compounds generation. The objective of this review is to summary the recent data of saccharification by chemical and enzymatic means from red seaweed for especially focused on automobile industry.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.87-95
• /
• 2019

Earth-work calculation is the important data for estimating the optimal construction cost at the construction site. Earth-work calculations require the accurate terrain data and precise soil volume calculations. Drone surveying technology provides accurate topography in a short time and economic advantages. In this paper, a drone surveying technique was used to derive a high precision soil volume calculation system. Field demonstration were performed to verify the accuracy of the volume measurement system. The results of earth-work calculation using drone survey were compared with those of GPS surveying. In addition, the developed earth-work volume calculation algorithm is compared with the existing aerial survey software (Pix4D) to verify the accuracy.

• Journal of Hydrogen and New Energy
• /
• v.26 no.6
• /
• pp.590-599
• /
• 2015

In this paper a performance analysis is carried out based on the first and second laws of thermodynamics for heat exchanger in organic Rankine cycle (ORC) for the recovery of low-temperature finite thermal energy source. In the analysis, effects of the selection of working fluid and pinch temperature difference are investigated on the performance of the heat exchanger including the effectiveness of the heat exchanger, exergy destruction, second-law efficiency, number of transfer unit (NTU), and pinch point. The temperature distribution are shown depending on the working fluids and the pinch temperature difference. The results show that the performance of the heat exchanger depends on the pinch temperature difference sensitively. As the pinch temperature increases, the exergy destruction in the evaporator increases but the effectiveness, second law efficiency and NTU decreases.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.349-354
• /
• 1991

The power output behavior of the binary cycle composed of two Carnot cycles is analyzed with considering heat transfer processes, in which the finitely constant temperature differences between heat sources and working fluids exists. The power output has the maximum value as an extremum for cycle temperatures and capacities of heat exchangers. In the internally reversible cycle, the power output is independent of the cycle temperature in the intermediate heat exchanger. In this case when the total capacities of heat exchangers are given, three heat exchangers have the same capacities at the maximum power output condition. In addition, when the cycle is not extremum for cycle temperatures and capacities of heat exchangers. At the maximum power output condition, the capacity of heat exchanger at the cold side is slightly more than the hot side as the cycle effectiveness decreases.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.37-42
• /
• 2001

This paper computes the bluff-body stabilized jet and flame. This study numerically investigates the nonpremixed $C_{2}H_{4}-air$ jet for the nonreacting case and the nonpremixed $CH_{3}OH-air$ turbulent flames for the reacting case using the laminar flamelet model on modified KIVA2 code. And this study predicts $NO_{x}$ formation characteristics using Eulerian Particle Flamelet Model. In the present study, the turbulent combustion model is applied to analyze both nonreacting and reacting case. And both standard $k-{\varepsilon}$ model and modified $k-{\varepsilon}$ model are used in nonreacting case. Calculations are compared with experimental data in terms of velocity, mixture fraction, mixture fraction Root Mean Square and Temperature. The present model correctly predicts the essential features of flame structures and $NO_{x}$ formation characteristics in the bluff-body stabilized flames.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.5 no.1
• /
• pp.1-10
• /
• 2007

This study aims to comparison of ultrasonography on both sides of the upper arm of hemiplegic patient. The biceps brachii and deltoid muscle of ten subjects(4 men, 6 women) with stroke were scanned with ultrasonography at the muscle belly at rest at elbow angles of 90 deg. The echogenicity(densit, white area index; WAI) and muscle thickness of ultrasonography was examined using real-time B-mode ultrasonography with 7.5 MHz linear-array prob. In the biceps brachii muscle, MHz there were significant differences of thickness, density, and WAI between affected side and non-affected side. In the deltoid muscle, there were significant differences of thickness, density, and WAI between affected side and non-affected side. Both of the muscles, thickness of the affected side was thin than non-affected side and echogenicity(density, WAI) of the affected side was higher than non-affected side. This study showed that change of skeletal muscle architecture properties occurred in the upper arm of the affected side muscle of hemiplegic patient.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.5 no.1
• /
• pp.11-20
• /
• 2007

The purpose of this study were to analysis on quality properties of lower extremity of patient with stroke by the existence of the independent walking. We recruited fourteen adults after stroke(7 male, 7 female; mean age, 64y) for our study. The subjects were divided into two groups; independent walking group(3 male, 3 female) and non-independent walking group(4 male, 4 female). We used in this study included a B-mode ultrasonography scanner with a 7.5 MHz linea probe. During the experiment, the subject was seated in the chair. The echogenicity(density, white area index; WAI) of the tibialis anterior and rectus femoris muscles were measured on both sides of the leg. In both of the density and WAI, the tibialis anterior muscle were significant differences between paratic side and non-paratic side, the independent walking and non-independent walking group. However, in both of the density and WAI of the rectus femoris muscle were only significant differences between paratic side and non-paratic side. This study showed that stroke and the independent walking have influenced on quality properties of lower leg. Especially, the independent walking has influenced on the tibialis anterior muscle.