• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1014-1019
• /
• 2009

The optimal control system for heat source and HVAC system has been developed for minimizing energy consumption while maintaining the comfort of indoor thermal environment in terms of the environmental variables such as time varying indoor load and outdoor temperatures. The optimal set-points of control parameters are supply air temperature and chilled or hot water temperatures. The optimal control study has been implemented for biosafety laboratory by using TRNSYS simulation program in order to investigate energy performance for heat source and HVAC system.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.928-933
• /
• 2009

The purpose of this study is to examine the energy consumption, carbon dioxide emission & energy cost of district heating using sewage source. The annual TOE of heat pump using sewage source save 37.1 percent than city gas boiler. And annual carbon dioxide emission of heat pump cut down 41.3 percent than city gas boiler. If it charges the rate schedule for district heating to apartment resident, collected amount are 3,127,170 thousand won. As energy cost of heat pump & circulation pump are 1,378,072 thousand won. the profits are 1,749,098 thousand won. As payback period is 8.97years, applicability is low level. However, it has advantages in energy consumption, carbon dioxide emission & energy cost. Therefore, it needs to proceed through government assistance.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1043-1048
• /
• 2009

This paper proposes the new operation control method that let heat source system stop and circulate only hot water at low load, and verified the introduction effect. At first, we constructed simulation model of heat source system and examined the proposing method by using simulation model. At last, we examined the introduction effect of proposing method with actual building. As a result, the primary energy consumption of heat source system was reduced by about 13%.

• 월간 기계설비
• /
• s.243
• /
• pp.50-54
• /
• 2010

서울시가 마곡지구에 하수열이나 연료전지, 폐열, 소각열 등의 친환경에너지를 열원으로 하는 집단 냉 난방에너지를 오는 2013년 2월부터 공급한다. 2031년엔 마곡지구 전역으로 공급이 확대된다. 서울시는 올해부터 2031년까지 총 사업비 5,498억 원을 투입, 집단신재생에너지 열원시설을 3단계(1단계 10~16년, 2단계 17~23년, 3단계 24~31년)로 건립한다고 밝혔다. 서울시가 마곡지구에 필요한 냉 난방에너지를 신재생에너지를 이용한 집단에너지로 공급함으로써 일반방식보다 에너지는 30,792toe/년(35.8%) 절감하고, 온실가스 배출량은 65,103t$CO_2$/년(35.8%)하며, 대기오염물질은 109,287kg/년(54.5%) 감축될 것으로 분석했다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.2
• /
• pp.741-751
• /
• 1996

The coupled conduction and convection heat transfer from the protruding heat source in a vertical channel is numerically investigated. Conjugate solution of the two-dimensional energy equation is obtained for the incompressible air flow over the rectangular block with local heat source. It was found that several recirculation zones and separation bubble near the block were related to Re and Gr. And the results show that fractions of the heat transfer through each of the block face, maximum temperature of the block and the relative effect of each parameter on the maximum temperature and heat transfer.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.218-221
• /
• 2003

국내 난방 시스템은 대부분 화석에너지를 열원으로 하는 온수순환방식이다. 화석에너지를 사용하기 때문에 난방 시스템 가동에서 발생되는 공해는 대기-오염의 여러 원인 중 하나이며 가동 효율도 떨어진다. 이러한 단점들을 보완하기 위하여 새롭게 보급되고 있는 난방 시스템 중 히프파이프를 이용한 난방시스템은 전기에너지를 열원으로 사용하는 청정에너지로서 기존 난방시스템 보다 $40\%$의 에너지 절감 효과를 나타내고 있다. 본 논문은 전기에너지를 사용하는 히팅 시스템의 제어를 위하여 개발된 컨트롤러에 관한 것이다.

• Economic and Environmental Geology
• /
• v.17 no.3
• /
• pp.163-169
• /
• 1984

A linear inversion of heat flow values using heat production data with reliable value is studied in this work. To evaluate 2-D problem, a thin vertical sheet model is considered. Making use of a relation based on potential theory, a new relation between $q_{rad}$ and $A_0$ is derived. The forward calculations with noise and without noise are shown. The inversion of random search is comparable to that of ridge regression method. The agreements between the computed and best fit after inversion suggest the importance of random search method in the inversion technique.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2014

In order to evaluate the performance of ground heat source in thermal labyrinth on pre-heating in winter season and pre-cooling in summer season, the followings are made as a conclusion through case study of H project by using the weather data from Korea meteorological administration and CFD model. By making outdoor air inlet via ground heat source in thermal labyrinth for conduction, convection and etc., the temperature rise is $13.4^{\circ}C$as the effect of pre-heating in winter season. On the other hand, as the effect of pre-cooling in summer season, the temperature decrease is $7.2^{\circ}C$. The energy saving rate by the application of ground heat source in thermal labyrinth is 9.1%.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.191-194
• /
• 2011

Low-grade waste heat has generally been discarded in industry due to lack of efficient recovery methods. In recent years, organic Rankine cycle(ORC) has become a field of intense research and appears as a promising technology for conversion of heat into useful work of electricity. In this work thermodynamic performance of ORC with superheating of vapor is comparatively assessed for various working fluids. Special attention is paid to the effects of system parameters such as the evaporating temperature on the characteristics of the system such as maximum possible work extraction from the given source, volumetric flow rate per 1 kW of net work and quality of the working fluid at turbine exit as well as thermal efficiency.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.9
• /
• pp.788-795
• /
• 2004

Cooling characteristics of protruding heat sources in a parallel channel with or without baffles are studied experimentally, The test section consists of two channels formed by two covers and one board made of polycarbonate which has three uniform heat source blocks. Five different cooling methods are considered to find out the most efficient cooling method in a given geometry and heat sources. The velocity and temperature of cooling medium, the temperature of the block surface are measured. The results are compared to examine the cooling characteristics of the different cooling methods.