• Korean Journal of Materials Research
• /
• v.19 no.11
• /
• pp.581-587
• /
• 2009

Fe powders with elongated and aggregated structure as heat pellet material for thermal battery applications were prepared by spray pyrolysis under various preparation conditions. The precursor powders with spherical shapes and hollow morphologies turned into Fe powders after reduction at a temperature of 615$^{\circ}C$ under 20% $H_2$/Ar gas. The powders had pure Fe crystal structures irrespective of the preparation conditions of the precursor powders in the spray pyrolysis. The morphologies and mean sizes of the Fe powders are affected by the preparation conditions of the precursor powders in the spray pyrolysis. Therefore, the ignition sensitivities and the burn rates of the heat pellets formed from the Fe powders prepared by spray pyrolysis are affected by the preparations of the precursor powders. The Fe powders prepared under the optimum preparation conditions have a BET surface area of 2.9 $m^2g^1$. The heat pellets prepared from the Fe powders with elongated and aggregated structure have a good ignition sensitivity of 1.1W and a high burn rate of 18 $cms^1$.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.5 no.1
• /
• pp.59-71
• /
• 2007

The purpose of this study was to study for the change of neural adaptation by muscle contraction force when neuromuscular electrical stimulation(NMES) was applied. Sixteen subjects(8 male, 8 female) without neuromuscular disease volunteered to participate in the study. All subjects were divided into two subgroups: control(no electrical stimulation) group, NMES(50% maximal voluntary isometric contraction) group. NMES training program was performed in the calf muscle over three times a week for 12 weeks. Before and after experiment MVIC of ankle plantar flexor was measured by use of dynamometer. H-reflex and V-wave in tibial nerve were measured. The following results were obtained; MVIC and V/Mmax ratio were significantly increased in the electrical stimulation groups. However, H/Mmax ratio was not changed. It was closely relationship between MVIC and V/Mmax ratio. In this study, the effect of neural adaptation of central neural adaptation was found in this study. Accordingly, NMES means not only a change of muscle fiber and skeletal muscle volume but also a effect of neural adaptation of central neural drive. Also, it was found that there was closely relationship between MVIC and neural adaptation of central neural drive by NMES.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.5 no.1
• /
• pp.45-58
• /
• 2007

This study aims to examine the effects on nociceptive neuron excitability by application of electroacupuncture and Meloxicam gel in rat with inflammation. It used 24 rats for experiment, divided them into control group, electroacupuncture group(EA group), Meloxicam group(ME group), combination of electroacupuncture with Meloxicam group(EA+ME group), caused hyperalgesia by injecting ${\lambda}$-carrageenan into hindpaw and conducted treatment three times for experimental period. Noxious flexion withdrawal reflex(NFR) and somatosensory evoked potential(SEP) were measured immediately after induction, at 24 hours, 48 hours and 72 hours after induction. Change of NFR(reaction time, RMS) showed no significant differences among EA group, Meloxicam group, and EA+Meloxicam group, but all treatment groups showed significant differences compared to control group from 48 hours. In NFR threshold, there were significant differences between EA+Meloxicam and other groups. In SEP amplitude, there were significant differences between EA+Meloxicam and control group from 48 hours. This study showed that EA+Meloxicam gel had an effect on nociceptive neurone excitability. Therefore, it is considered that appropriate combination of anti-inflammatory drug with electroacupuncture for pain control will be very desirable.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.5 no.1
• /
• pp.33-43
• /
• 2007

This study divided 35 hemiplegia patients into control group having standard physical therapy and gait training and functional electrical stimulation(FES) group using FES during gait training in order to examine the effects of applying FES to ankle joint dorsiflexor on motor unit action potential. Stimulation conditions of FES were pulse rate 35 pps, pulse width $250{\mu}s$, and on-time 0.3 second, treatment hour was 30 min. and treatment period was once a day for five days a week through six weeks. For functional evaluations before and after treatment, root mean square(RMS) were measured and the following conclusions were obtained. : In RMS analysis of motor unit action potential, gastrocnemius was significantly reduced in both weight bearing(p<.001) and bearing condition (p<.05). In conclusion, application of FES to hemiplegia patients in recovery stage during gait training decreased RMS and it was interpreted that it was caused by mitigation of muscular spasticity by reduction of motor unit.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.287-298
• /
• 2005

In this local self-government era, in order to achieve real local decentralization, it is guaranteed to establish self-finances of certain administration level. Nowadays Local equalization scheme is carried out for insuring regional equal development and efficiency and effectiveness of administration and for solving vertical horizontal problem of unequal finance in local government. Local equalization scheme is the system to guarantee the financial source so that all local self-governing organizations can obtain national minimum standard while correcting the unbalance of finance and maldistribution of tax revenue source between regions. This paper presents the directions of improvement so that national subsidy and local tax can contribute to the finance balance of local self-governing organization in the uncertainties of future finance with weak financial ability. Consequently, it is required to operate the system according to balance principle by adjusting the operation form and distribution type such as national subsidy and local tax.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.2
• /
• pp.20-29
• /
• 2012

The green house on the waterfront is air-conditioned by a water-source heat pump system with riverbank filtration water. In order to supply riverbank filtration water in alluvium aquifer, the riverbank filtration facility for water intake and recharge, two pumping wells and one recharge well, has been constructed. The research site in Jinju, Korea was chosen as a good site for riverbank filtration water supply by the surface geological survey, electrical resistivity soundings, and borehole surveys. In the results of two boreholes drilling at the site, it was revealed that the groundwater table is about 3 m under the ground, and that the sandy gravel aquifer layer in the thickness of 6.5 m and 3.5 m occurs at 5 m and 7 m in depth below the ground level respectively. To prevent the recharge water from affecting the pumped water which might be used as heat source or sink, the distance between pumping and recharge wells is designed at least 70 m with a quarter of recharged flow rate. It is predicted that the transfer term, the recharge water affects the pumping well, is over 6 months of heating season. Hydrogeological simulation and underground water temperature measurement have been carried out for the pumping and recharge well positions in order to confirm the capability of sustainable green house heating and cooling.

• Journal of Oral Medicine and Pain
• /
• v.25 no.1
• /
• pp.53-62
• /
• 2000

Bone marrow culture systems are widely used to differentiate osteoclast-like cells in vitro using several osteotropic hormones. In this study, we isolated and cultured the mouse bone marrow cells with or without some osteotropic hormones such as parathyroid hormone(PTH), prostaglandin $E_2(PGE_2)$ and $l,25(OH)_2-vitamin$ $D_3$(Vit. $D_3$). We confirmed the formation of osteoclast-like cells morphologically and functionally by the expression of tartrate-resistant acid phosphatase(TRAP) and by their capability to resorb dentin slices. We also studied the effects of transforming growth $factor-{\beta}(TGF-{\beta})$ and epidermal growth factor(EGF) on the Vit. $D_3-induced$ osteoclast-like cell formation. In control, a few multinucleated cells were formed whereas PTH and $PGE_2$ increased the number of multinucleated cells. PTH, $PGE_2$ and Vit. $D_3$ induced the formation of TRAP-positive multinucleated cells. After culture of mouse bone marrow cells on the dentin slices with or without osteotropic hormones, giant cells with diverse morphology were found on the dentin slices under the scanning electronmicroscopy. After removing the attached cells, resorption pits were identified on the dentin slices, and the shape of resorption pits was variable. EGF increased the osteoclast-like cell formation induced by Vit. $D_3$, however, $TGF-{\beta}$ showed biphasic effect, which at low concentration, increased and at high concentration, decreased the osteoclast-like cell formation induced by Vit. $D_3$.

• Journal of the Economic Geographical Society of Korea
• /
• v.6 no.1
• /
• pp.79-97
• /
• 2003

This study aims to investigate the changing trend of the industrial complexes in the region of Liege, Belgium. The accessibility to the expressway and to the central city, the favorable atmosphere of the community, and the pleasant natural environment are the important factors in locating the industrial complexes in suburban areas. Since the 1970s the industrial complexes are developed generally on a medium or small scale coexisting with manufacturing firms and service business, but the business parks, the service parks and the science parks are developed in some strategic places. The industrial complexes are filled up with relocated firms rather than new established firms, and the industrial structure is diversified with the increase of service business. As manufacturing firms emigrated from the central city to suburban areas, the central city suffers from some serious problems such as the increased unemployment, the decreased population, the appearance of industrial ruined spaces and the worse of finance by the decreased tax sources. The local government tries to solve these problems by enacting some policies in order to revive the manufacturing firms in the central city, but with little avail.

• Korean Journal of Biological Psychiatry
• /
• v.18 no.3
• /
• pp.119-125
• /
• 2011

Objective It has been suggested that the dopamine D2 receptor gene (DRD2) is associated with pathological gambling (PG). We investigated the association of the DRD2 Taq1A polymorphism and the temperament in PG using Cloninger's temperament and characteristic inventory (TCI). Methods 104 PG patients and 114 control subjects were recruited. Tests for DRD2 Taq1A polymorphism were conducted in both PG patients and controls. PG patients were requested to complete the TCI. Results There were no significant differences in frequencies of the genotype (${\chi}^2$ = 0.77, p = 0.681), allele (${\chi}^2$ = 0.52, p = 0.469), and allele (A1) carrier (${\chi}^2$ = 0.15, p = 0.695) between the PG patients and the control group. When we compared the TCI profile in the PG patients according to genotypes, there were significant differences in harm-avoidance (HA, p = 0.033), and self-directedness (SD, p = 0.012) among genotypes. These difference were more evident between A1 allele carriers and non-carriers (HA, p = 0.009 and SD, p = 0.004). Conclusion Present results suggest Taq1A polymorphism may not play an important role in the susceptibility to pathological gambling in our population. However, Taq1A polymorphism might be associated with some temperament in Korean PG patients.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1048-1054
• /
• 2011

Laser surface hardening process is the method of hardening surface by inducing rapid self quenching of laser injected area through transfer of surface heat to inside after rapid heating of laser injected area only by high density energy heat source. This surface treatment method does not involve virtually any thermal deformation by heat treatment nor accompanies any other process after surface hardening treatment. In addition, allowing local machining, this method is a surface treatment method suitable for die with complicated shape. In this study, die material cast iron was surface-treated by using high power diode laser with beam profile suitable for heat treatment. Since the shapes of die differ by press die process, specimens were heat-treated separately on plane and corner depending on the applied parts. At this time, corner heat treatment was done with optic head inclined at $10^{\circ}$. As a result, corner heat treatment easily involves concentration of heat input due to limitation of heat transfer route by the shapes compared with plane part, so the treatment accomplished hardening at faster conveying speed than plane heat treatment.