• Progress in Superconductivity
• /
• 제2권2호
• /
• pp.65-70
• /
• 2001

$Pb/Bi_2Sr_2CaCu_2O_{8+\delta}$-single-crystal junctions with the tunneling direction along the c axis of the crystal were fabricated to obtain an s-wave-superconductor/d-wave-superconductor Josephson junctions. The tunneling R (T) curves and current-voltage characteristics show distinct features which can be explained only under the assumption that the order parameter of high-$T_c/Bi_2Sr_2CaCu_2O_{8+{\delta}}$ superconductors has a pure d-wave symmetry, which is in contrast to the case of $YBa_2Cu_3O_{7+{\delta$}}$erconductors where a minor s-wave component is also present..

• 한국세라믹학회지
• /
• 제33권7호
• /
• pp.802-808
• /
• 1996

PbTiO3 thin films were fabricated onto MgO(100) single crystal substrate by reactive D. C magnetron sput-tering of Pb and Ti metal in an oxygen and argon gas mixture. The annealing of the thin films resulted in the decrease of both the c-axis orientation ratio and the lattice parameter. It is well known that the c-axis lattice parameter of thin film is dependent on the Pb/(Pb+Ti)ratio and the residual stress in the film The PbTiO3 thin films with a Pb/(Pb+T) ratio ranging from 0.45 to 0.57 were fabricated and annealed. The structure of the film the c-axis orientation ratio and the lattice parameter were not dependent on the Pb/(Pb+Ti) ratio before and after annealing. These experimental results proved that the decrease of the c-axis lattice parameter under the annealing conditions was due to the relaxation of the intrinsic stress in the film. This relaxation of the intrinsic stress caused the decrease of the c-axis orientation ratio and this phenomenon can be explained by c-axis growth lattice model.

• Journal of Welding and Joining
• /
• 제10권1호
• /
• pp.43-51
• /
• 1992

The plastic zone formed around a notch tip is important in analyzing the fracture toughness of structures and particularly weld cracks existed in the weld HAZ (heat affected zone) which produces local plastic deformation at the crack tip. Therefore, in order to analyze the fracture toughness in weld HAZ, it is necessary to investigate the new fracture toughness parameter $K_{c}$ $^{*}$ and critical plastic strain energy $W_{p}$ $^{c}$ according to the shape and size of the plastic zone. 1) If the temperature corresponding to $K_{c}$ $^{*}$=130kg-m $m^{-3}$ 2/ is determined, transition temperature $T_{tr}$ the magnitude of plastic zone size, and heat input change depending on the fracture toughness. The blunted amounts of the parent and weld HAZ show mild linear variation until .delta.=0.4mm and then increase very steeply there after. 2) The relation between the plastic strain energy( $W^{p}$ ) and transition temperature( $T_{*}$tr) in parent metal is more sensitive than that of weld HAZ. However, the plastic strain energy depends on the transition temperature, and thus the yield stress, .sigma.$_{ys}$ becomes an important parameter for plastic strain energy. 3) The critical plastic strain energy( $W_{p}$ $^{c}$ ) absorbed by the plastic zone at the notch tip indicated in case of parent metal: 60J/mm, in case of heat input(20KJ/cm): 75J/mm, in case of heat input(30KJ/cm); 50J/mmJ/mm.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2158-2173
• /
• 2004

In this paper, the higher order terms in the crack tip stress fields are investigated macroscopically for more realistic assessment of structural material behaviors. For reactor pressure vessel material of A533B ferritic steel, effects of crack size and temperature have been evaluated using 3-point SENB specimens through a series of finite element analyses, tensile tests and fracture toughness tests. The T-stress, Q-parameter and q-parameter as well as the K and J-integral are calculated and mutual relationships are investigated also. Based on the evaluation, it has proven that the effect of crack size from standard length (a/W=0.53) to shallow length (a/W=0.11) is remarkable whilst the effect of temperature from -20$^{\circ}C$ to -60$^{\circ}C$ is negligible. Finally, the cleavage fracture toughness loci as a function of the promising Q-parameter or q-parameter are developed using specific test results as well as finite element analysis results, which can be applicable for structural integrity evaluation considering constraint effects.

• 한국해양공학회지
• /
• 제15권2호
• /
• pp.46-52
• /
• 2001

In this paper, the real-time prediction of high temperature creep life was carried out for the friction welded joints of dissimilar heat resisting steels (SUH3-SUH35). various life prediction method such as LMP (Larson_miller Parameter) and ISM (initial strain method) were applied. The creep behaviors of those steels and the welds under static load were examined by ISM combined with LMP at 500, 600 and $700^{\circ}C$, and the relationship between these two methods was investigated. A real-time creep lie (tr, hr) prediction equation by initial strain (${\varepsilon}_0$, %) under any creep stress ($\sigma$, MPa) at any high temperature (T, K) was developed as follows: $t_r={\alpha}{\varepsilon}_0^{\beta}{\sigma}^{-1}$ where, ${\phi}=16: {\alpha}=10^{51.412-0.104T+5.375{\times}10^5T^2}$, $ {\beta}=-83.989+0.180T-9.957{\times}10^{-5}T^2,{\phi}=20:$ ${\alpha}=10^{69.910-0.146T+7.744{\times}10^{-5}T^2$, ${\beta}=-51.442+0.105T-5.595{\times}10^{-5}T^2$ for SUH3-SUH35 friction weld of =16mm and 20mm, respectively.

• Structural Engineering and Mechanics
• /
• 제15권2호
• /
• pp.249-267
• /
• 2003

In this study, circular plates subjected to general type of loads and supported on a two-parameter elastic foundation are analysed. The stiffness, elastic bedding and soil shear effect matrices of a fully compatible ring sector plate element, developed by Saygun (1974), are obtained numerically assuming variable thickness of the element. Ring sector soil finite element is also defined to determine the deflection of the soil surface outside the domain of the plate in order to establish the interaction between the plate and the soil. According to Vallabhan and Das (1991) the elastic bedding (C) and shear parameters ($C_T$) of the foundation are expressed depending on the elastic constants ($E_s$, $V_s$) and the thickness of compressible soil layer ($H_s$) and they are calculated with a suitable iterative procedure. Using ring sector elements presented in this paper, permits the generalization of the loading and the boundary conditions of the soil outside the plate.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.154-156
• /
• 1995

The effect of a periodic and a chaotic' behaviour in the Bonhoeffer-Van der Pol(BVP) oscillation of the nerve membrane driven by a periodic stimulating current $A_1=cos\;{\omega}\;t$ are investigated by numeric analysis and hardware Implementation. To control the chaotic motion, we are suggested by temperature parameter c, $c=c(1+\eta\;cos\;{\Omega}\;t)$ which the values of $\eta,\;Omega$ varied respectively. The feasibilities of chaotic and periodic phenomena were analysed by phase plane and time series.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.529-535
• /
• 2016

이론적 연구를 통하여 정수압의 영향을 받는 항복기준인 Mohr-Coulomb 항복기준과 Drucker-Prager 항복기준의 강도정수를 ${\pi}$-평면에 대해 일치시킴으로써 강도정수간의 상관관계를 분석해 보았다. Drucker-Prager 강도정수 ${\alpha}$와 k를 Mohr-Coulomb 강도정수인 c와 ${\phi}$를 이용하여 표현하였는데 k는 c, ${\phi}$의 함수로 표현되었고 ${\alpha}$는 ${\phi}$만의 함수로 표현되었다. Drucker-Prager 강도정수 ${\alpha}$값은 흙의 내부마찰각이 커짐에 따라 증가함을 알 수 있었는데 Drucker-Prager 항복기준을 나타내는 원이 Mohr-Coulomb 항복기준에 외접 및 내접하는 경우의 ${\alpha}$값을 나타내는 ${\alpha}_c$와 ${\alpha}_i$값에 대하여 평균값인 ${\alpha}_{av}$의 값은 내부마찰각에 비례하였는데 내부마찰각이 $10^{\circ}$인 경우 약 0.07이었으며 내부마찰각이 $45^{\circ}$인 경우 약 0.29이었다. 또한, ${\alpha}_c/{\alpha}_i$값은 내부마찰각에 비례하였는데 내부마찰각이 $10^{\circ}$인 경우 약 1.12이었으며 내부마찰각이 $45^{\circ}$인 경우 약 1.62이었다. Mohr-Coulomb 강도정수가 Drucker-Prager 강도정수 k에 미치는 영향을 살펴보았는데 본 연구에서 가정한 흙의 점착력 중 최소값이 10kPa인 경우를 제외하고 흙의 내부마찰각의 영향을 거의 받지 않고 전체적으로 흙의 점착력에 영향을 받음을 알 수 있었다. 일정한 점착력에 대하여 내부마찰각이 증가함에 따라 일축압축시 및 일축인장시의 Mohr-Coulomb 항복기준에 의한 축차응력인 $S_{c0}$와 $S_{t0}$ 그리고 두 값의 평균값인 $S_{0(ave)}$값은 감소하였다. 또한 내부마찰각이 증가할수록 Mohr-Coulomb 항복궤적을 나타내는 육각형이 더욱 불규칙해져 $S_{0(ave)}$로부터 $S_{c0}$와 $S_{t0}$ 사이의 편차가 내부마찰각이 증가함에 따라 커짐을 알 수 있었다.

• 한국주조공학회지
• /
• 제33권1호
• /
• pp.13-21
• /
• 2013

The effects of rare earth element (R.E.) and cooling rate on the eutectic reaction of flake graphite cast irons were studied by combined analysis of macro/micro-structure and cooling curve data. The correlation between eutectic reaction parameter and macro/micro-structure was systematically investigated. Two sets of chemical compositions with the different addition of R.E. were designed to cast. Three types of molds for cylindrical specimens with the different diameters were prepared to analyze cooling rate effect. The difference between undercooling temperature and cementite eutectic temperature (${\Delta}T_1=T_{U}-T_{E,C}$), which is increased by adding R.E. and decreased by increasing cooling rate, is considered to be a suitable eutectic reaction parameter for predicting graphite morphology. According to the criterion, A-type graphite is mainly suggested to form for ${\Delta}T_1$ over $20^{\circ}C$. Eutectic reaction time (${\Delta}t$), which is decreased by adding R.E. or increasing cooling rate, is a suitable eutectic reaction parameter for predicting eutectic cell size. Eutectic cell size is found to decrease in a proportion to the decrease of ${\Delta}t$.

• 한국결정성장학회지
• /
• 제20권4호
• /
• pp.159-163
• /
• 2010

스컬용융법으로 큐빅지르코니아(YSZ) 단결정들($ZrO_2:Y_2O_3:Co_3O_4:CeO_2$=64:36:0.5:0~0.3mol%)을 성장시켜 $N_2$ 분위기 $1200^{\circ}C$에서 3시간 동안 열처리 하였다. 갈색의 단결정들은 각각 녹색 또는 청색으로 변화되었다. 열처리 전 후의 YSZ 단결정들은 직경 7, 두께 2 mm의 웨이퍼 또는 직경 12 mm의 라운드브릴리언트 컷으로 연마 하였다. 각 시편의 광학적 또는 구조적 특성은 UV-VIS 분광광도계와 XRD(X-ray diffraction)로 분석하였으며, $Ce^{3+}(^2F_{5/2},\;_{7/2}(4f){\rightarrow}^2T_g(5d^1))$, $Co^{2+}(^4A_2(^4F){\rightarrow}^4T_1(^4F)$ 또는 $^4T_1(^4P)$) 및 $Co^{3+}$에 의한 흡수, 이온화에너지 및 격자상수 변화를 확인하였다.