• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.3
• /
• pp.15-20
• /
• 2012

This paper presents a 5-Gb/s optical receiver circuit realized in a $0.13-{\mu}m$ CMOS technologies for the applications of high-speed digital interface. Exploiting modified RGC input stage at the front-end transimpedance amplifier, interleaving active feedback and source degeneration techniques at the limiting amplifier, the proposed optical receiver chip demonstrates the measured results of $72-dB{\Omega}$ transimpedance gain, 4.7-GHz bandwidth, and $400-mV_{pp}$differential output voltage swings up to the data rate of 5-Gb/s. Also, the chip dissipates 66mW in total from a single 1.2-V supply, and occupies the area of $1.6{\times}0.8mm^2$.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.2
• /
• pp.165-170
• /
• 2016

The characteristic and application of a new duality structure in the $NCV-{\mid}v_1$ > library is studied in this paper. All unitary operations on arbitrarily many qudit's n can be expressed as composition of one- and two-qudit $NCV-{\mid}v_1$ > libraries if their state vectors are eigenvectors. This research provides an extended realization from Barenco's many bits n operator(U(2n)) which is applicable to only all positive polarity statevectors to whole polarity ones. At the control gate synthesis of a unitary operator, such an enhanced expansion is possible due to their symmetric duality property in the case of using both $NCV-{\mid}v_1$ > and $NCV^{\dag}-{\mid}v_1$ > libraries which make the AND predominantly dependent cascade synthesis possible.

• Journal of Genetic Medicine
• /
• v.2 no.2
• /
• pp.65-70
• /
• 1998

Lysosomal acid lipase (LAL) plays a central role in the intracellular degradation of neutral lipids derived from plasma lipoproteins. In this study, we investigated the missense mutation within exon 2 of human LAL gene changing of codon -6 of prepeptide from threonine to proline. The Thr-6Pro mutation was detected by the HaeIII restriction fragment length polymorphism (RFLP) and single-strand conformation polymorphism (SSCP). We analyzed the mutation in subjects with 221 unrelated randomly selected control samples and 86 patients with familial hypercholesterolemia (FH) in Korea. We observed that mutation is present with high frequency in Korea compared to other populations studied previously. The frequency of PP homozygote in the FH group was observed considerably higher than that of control. However, there was no significant difference of genotype frequency between two groups. These results, together with the fact that plasma lipids and lipoproteins levels between genotypes showed no statistical difference, suggest that the Thr-6Pro mutation in the LAL gene may have no association with the increased risk of FH development.

• The Journal of the Korea Contents Association
• /
• v.12 no.5
• /
• pp.144-153
• /
• 2012

This study investigates whether the use of N-screen service affects the use of Home TV service as a supplement or substitution. In this study, we collected 132 available survey answers from CJ Hellovision Tving users. We found supplement relationship between Tving and Home TV, which implies that the more use in Tving service, the use of Home TV increases as much as 36.4%. From the result, some meaningful implications were derived. First, a direction for content price negotiation between N-screen providers and terrestrial broadcasters can be suggested. Second, the result will provide a suggestion for establishing a competitive strategy between N-screen providers and Pay-TV providers. Third, this study may solve copyright dispute between content providers and pay TV operators.

• Biomolecules & Therapeutics
• /
• v.22 no.4
• /
• pp.295-300
• /
• 2014

The actin cytoskeleton plays an important role in macrophage-mediated inflammatory responses by modulating the activation of Src and subsequently inducing nuclear factor (NF)-${\kappa}B$ translocation. In spite of its critical functions, few papers have examined how the actin cytoskeleton can be regulated by the activation of toll-like receptor (TLR). Therefore, in this study, we further characterized the biological value of the actin cytoskeleton in the functional activation of macrophages using an actin cytoskeleton disruptor, cytochalasin B (Cyto B), and explored the actin cytoskeleton's involvement in morphological changes, cellular attachment, and signaling events. Cyto B strongly suppressed the TLR4-mediated mRNA expression of inflammatory genes such as cyclooxygenase (COX)-2, tumor necrosis factor (TNF)-${\alpha}$, and inducible nitric oxide (iNOS), without altering cell viability. This compound also strongly suppressed the morphological changes induced by lipopolysaccharide (LPS), a TLR4 ligand. Cyto B also remarkably suppressed NO production under non-adherent conditions but not in an adherent environment. Cyto B did not block the co-localization between surface glycoprotein myeloid differentiation protein-2 (MD2), a LPS signaling glycoprotein, and the actin cytoskeleton under LPS conditions. Interestingly, Cyto B and PP2, a Src inhibitor, enhanced the phagocytic uptake of fluorescein isothiocyanate (FITC)-dextran. Finally, it was found that Cyto B blocked the phosphorylation of vasodilator-stimulated phosphoprotein (VASP) at 1 min and the phosphorylation of heat shock protein 27 (HSP27) at 5 min. Therefore, our data suggest that the actin cytoskeleton may be one of the key components involved in the control of TLR4-mediated inflammatory responses in macrophages.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.1 s.256
• /
• pp.36-42
• /
• 2007

This paper presents mechanical design, fabrication and test of a biomimetic fish robot actuated by a unimorph piezoceramic actuator, LIPCA(Lightweight Piezo-Composite curved Actuator.) We have designed a linkage mechanism that can convert bending motion of the LIPCA into the caudal fin movement. This linkage system consists of a rack-pinion system and four-bar linkage. Four types of artificial caudal fins that resemble caudal fin shapes of ostraciiform subcarangiform, carangiform, and thunniform fish, respectively, are attached to the posterior part of the robotic fish. The swimming test under 300 $V_{pp}$ input with 0.6 Hz to 1.2 Hz frequency was conducted to investigate effect of tail beat frequency and shape of caudal fin on the swimming speed of the robotic fish. At the frequency of 0.9 Hz, the maximum swimming speeds of 1.632 cm/s, 1.776 cm/s, 1.612 cm/s and 1.51 cm/s were reached for fish robots with ostraciiform, subcarangiform carangiform and thunniform caudal fins, respectively. The Strouhal number, which means the ratio between unsteady force and inertia force, or a measure of thrust efficiency, was calculated in order to examine thrust performance of the present biomimetic fish robot. The calculated Strouhal numbers show that the present robotic fish does not fall into the performance range of a fast swimming robot.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.4
• /
• pp.526-531
• /
• 2006

Minimum inhibition concentration(MIC), growth inhibition activity, and colony forming inhibitory activity of grapefruit seed extract against Bacillus cereus, Bacillus subtilis, Listeria monocytogenes, Escherichia coli, Salmonella enterifidis and Serratia marcescens were tested. MIC of grapefruit seed extract against Bacillus cereus, Bacillus subtilis, Listeria monocytogenes, Escherichia coli, Salmonella enteritidis and Serratia marcescens was 12.5, 12.5, 12.5, 50, 50, 100ppm, respectively. Growth inhibition concentration of grapefruit seed extract against Bacillus cereus, Bacillus subtilis, Listeria monocytogenes, Escherichia coli, Salmonella enteritidis and Serratia marcescens was below 1.0, 6.25, below 1.0, 6.25, 25, 25ppm, respectively. Colony forming inhibitory activity of grapefruit seed extract against Bacillus cereus, Bacillus subtilis, Listeria monocytogenes, Escherichia coli, Salmonella enteritidis and Serratia marcescens was 93.9, 94.0, 99.9, 4.4, 82.7, 86.4%, respectively. Colony forming inhibitory activities of grapefruit seed extract against Gram positive bacteria were higher than that against Gram negative bacteria.

• Advances in Traditional Medicine
• /
• v.3 no.4
• /
• pp.191-195
• /
• 2003

Euphorbia hirta, locally called 'ara tanah' or 'susun nabi' in Malaysia is a small annual herb common to the tropical countries and belongs to the same family as the tic and tapioca. E. hirta has had a long history of usage in the treatment of various ailments. In this current study, in vitro sensitivity test of crude aqueous and ethanol extracts of leaves and barks of E. hirta was carried out against bacteria (Escherichia coli, Salmonella enteritidis, Staphylocccus aureus and Bacillus subtilis) and fungi (Microsporum canis, Aspergillus fumigatus, Candida albicans and Candida tropicalis) using the discs diffusion method. The extract-impregnated discs (20, 40 and $80\;{\mu}g/{\mu}l$), the E. hirta extracts inhibited the growth of all the bacteria tested. The growth of C. albicans was inhibited in a concentration dependent manner by the aqueous leaves and barks extracts. C. tropicalis was found to be sensitive to the aqueous leaves extracts. The results were compared to antibacterial drugs of chloramphenicol, ampicilin, penicillin G, and enrofloxacine; and to antifungal drug of ketoconazole, itraconazole and miconazole. In this current study, it can be concluded that this plant has antimicrobial activity that is as potent as the standard antimicrobial drugs against certain microorganisms.

• Clean Technology
• /
• v.10 no.4
• /
• pp.195-201
• /
• 2004

Cellulase was modified with copolymer with polyethylene(PE)/polypropylene(PP) oxide and maleic anhydride(MA) by maleylation reaction, and modified cellulase was applied to the reprocessing of old newsprint (ONP). Cellulase of modified cellulase enhanced the detachment of ink particles by fibrillation of fiber. The copolymer, which acted as the surfactant formed bubbles and removed the ink particles in the floatation process. Modified cellulase showed the same deinking ability without excess dosage compared with the conventional method. And, it improved the physical properties including tensile strength, brightness, and whiteness compared with the conventional deinking process. The bond between the ink and fiber got stronger as the storage time increased, and it became very difficult to remove the ink particle. But, modified cellulase increased the deinking ability by 41% compared with the conventional process at the experiment of the ONP for 1 year storage time. It removed the yellowing and increased the whiteness and brightness as well as tensile strength and internal bond strength.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.645-649
• /
• 2009

Liquid desiccant cooling technology can supply cooling by using waste heat and solar heat which are hard to use effectively. For compact and efficient design of a dehumidifier, it is important to sustain sufficient heat and mass transfer surface area for water vapor diffusion from air to liquid desiccant on heat exchanger. In this study, the plate type heat exchanger is adopted which has extended surface, and hydrophilic coating and porous layer coating are adopted to enhance surface wettedness. PP(polypropylene) plate is coated by porous layer and PET(polyethylene terephthalate) non-woven fabric is coated by hydrophilic polymer. These coated surfaces have porous structure, so that falling liquid film spreads widely on the coated surface foaming thin liquid film by capillary force. The temperature of liquid desiccant increases during dehumidification process by latent heat absorption, which leads to loss of dehumidification capacity. Liquid desiccant is cooled by cooling water flowing in plate heat exchanger. On the plate side, the liquid desiccant can be cooled by internal cooling. However the liquid desiccant on extended surface should be moved and cooled at heat exchanger surface. Optimal mixing and distribution of liquid desiccant between extended surface and plate heat exchanger surface is essential design parameter. The experiment has been conducted to verify effective surface treatment and distribution characteristics by measuring wall side flow rate and visualization test. It is observed that hydrophilic and porous layer coating have excellent wettedness, and the distribution can be regulated by adopting holes on extended surface.