• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.11
• /
• pp.4499-4505
• /
• 2014

Glioblastoma, the most aggressive and malignant form of glioma, appears to be resistant to various chemotherapeutic agents. Hence, approaches have been intensively investigated to targeti specific molecular pathways involved in glioblastoma development and progression. Aloe emodin is believed to modulate the expression of several genes in cancer cells. We aimed to understand the molecular mechanisms underlying the therapeutic effect of Aloe emodin on gene expression profiles in the human U87 glioblastoma cell line utilizing microarray technology. The gene expression analysis revealed that a total of 8,226 gene alterations out of 28,869 genes were detected after treatment with $58.6{\mu}g/ml$ for 24 hours. Out of this total, 34 genes demonstrated statistically significant change (p<0.05) ranging from 1.07 to 1.87 fold. The results revealed that 22 genes were up-regulated and 12 genes were down-regulated in response to Aloe emodin treatment. These genes were then grouped into several clusters based on their biological functions, revealing induction of expression of genes involved in apoptosis (programmed cell death) and tissue remodelling in U87 cells (p<0.01). Several genes with significant changes of the expression level e.g. SHARPIN, BCAP31, FIS1, RAC1 and TGM2 from the apoptotic cluster were confirmed by quantitative real-time PCR (qRT-PCR). These results could serve as guidance for further studies in order to discover molecular targets for the cancer therapy based on Aloe emodin treatment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.172-173
• /
• 2008

In this study, $0.95(K_{0.5}Na_{0.5})NbO_3$-0.05Li$(Sb_{0.8}Nb_{0.2})O_3$ + $Ag_2O$ + x wt% $MnO_2$ were investigated as a function of the amount of $MnO_2$ addition in order to improve dielectric and piezoelectric properties of Lead-free piezoelectric ceramics. With increasing the amount of $MnO_2$ addition, density and electromechanical coupling factor $(k_p)$ increased up to 0.3wt.% $MnO_2$ and decreased above 0.3wt.% $MnO_2$. At the sintering temperature of 1020 $^{\circ}C$, Electromechanical coupling factor $(k_p)$, density, dielectric constant $({\varepsilon}r)$ and mechanical quality factor $(Q_m)$ of composition ceramics with 0.4wt% $Ag_2O$ addition showed the optimal value of 0.431, 4.33 g/$cm^3$, 820 and 119, respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.1
• /
• pp.98-112
• /
• 1996

Tho purpose of this study was to investigate hygienic and comfortable properties of socks. Materials are nine summer socks either frequently being worn or new products recently introduced to market. Three female and three male adults participated in this study. Through wearing experiment, the numbers of microbes on foot and sock were counted and subjective sensation was measured. The microbes were isolated and identified based on growth physiological characteristics. Nine different socks had smaller number of bacteria of sock than that of foot. The number of bacteria of sock was significantly related with that of foot in cotton socks, in piled cotton socks, in mesh cotton socks, in cotton+ nylon+ linen blended socks, in nylon socks. Total number of bacteria of tv cut finished socks was most small and total number of bacteria was increased in the order of ultra fresh finished socks, untreated cotton socks, nylon socks, cotton + nylon+ linen blended socks, mesh cotton socks, polyester+ nylcn+ linen blended socks, piled cotton socks, cotton socks. Total number of bacteria of cotton socks and piled cotton socks were significantly different from that of uv cut finished socks. Finished socks and .jocks has high air permeability had significantly small number of bacteria. Comfortable sensation in nylon socks and polyester+nylon+linen socks was significantly uncomfortable. The way socks finished and air permeability of .jocks affected theirs hygienic property, while fiber type of them affected comfortablene, is. Bacteria identified were Staphylo coccus aureus, S. au rice larir, S. cahn ii, S. ep ids midis, S. haemo Iyticus, S. h am in 2's. S.fapraphyticus, S. warnery, 1 cinetobater calcoaceticus bio. anitratus, p.reudomonas mendocina, p. paucimobilis, Flavimonas Q ryzihabitans (CDC Group VE-2), and Xanthomanas maltophina. Fungi isolated were Spicaria sp., Thrichoderma sp., Fusarium sp., Aspergillus sp., Epicoccum sp., Cladosporium sp., and Penicillium sp..

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.2
• /
• pp.126-130
• /
• 2008

In this study, in order to develop low loss multilayer piezoelectric actuator, PZN-PZT ceramics were fabricated using $Li_2CO_3,\;Bi_2O_3$, CuO and ZnO as sintering aids, their structural, piezoelectric and dielectric characteristics were investigated according to the amount of ZnO addition, At the sintering temperature of $870^{\circ}C$, the density, electromechanical coupling factor(kp), mechanical quality factor(Qm), dielectric constant(${\epsilon}_r$) and piezoelectric constant($d_{33}$) of 0.4 wt% ZnO added specimen (sintered at $870^{\circ}C$) showed the optimum value of $7.812g/cm^3$, 0.535, 916, 1399, 335 pC/N respectively. Taking into consideration above piezoelectric properties of the specimen sintered at low temperature, it was concluded that PZN-PZT ceramics using 0.4 wt% ZnO as additive showed the optimum characteristics as the composition ceramics for low loss multilayer piezoelectric actuator application.

• Journal of Digital Convergence
• /
• v.15 no.2
• /
• pp.251-262
• /
• 2017

This study distinguishes between factors that affect mental health of college students, establishes an effective approach to integrating model building, mental health promotion, and development of nursing intervention based on the Bronfenbrenner's ecological system theory. The study method investigate the causal relationship between the factors. The SPSS 20.0 program was used for general characteristics and mental health related characteristics. The fitness of the model was verified and the Amos 20.0 program was used for hypothesis verification. In the study, the fit index of the model was $x^2=614.90$ (p = .000), Q value = 3.5, GFI = .88, AGFI = .84, NFI = .92, NNFI = .94, CFI = .02, and RMSEA = .08, respectively. The results showed that stress was the most influential on mental health, and that stress coping strategies, self - esteem and parenting attitude affect mental health. In order to improve the mental health of college students, intervention should be carried out to develop nursing interventions to improve stress management, self - esteem, and coping with stress.

• Journal of Ecology and Environment
• /
• v.42 no.4
• /
• pp.308-316
• /
• 2018

Background: Genus Sasa, dwarf bamboos, are considered to be species that lower biodiversity in the temperate forests of East Asia. Although they have a long interval, they, the monocarpic species, have a unique characteristic of large-scale synchronized flowering. Therefore, once they have flowered and then declined, it may be an opportunity for suppressed surrounding species. A previous study reported that Sasa borealis showed specialized flowering nationwide with a peak in 2015. However, this was based on data from a social network service and field survey at Mt. Jeombong. Therefore, we investigated S. borealis in the forests of five national parks in order to determine whether this rare synchronized flowering occurred nationwide, as well as its spatial distribution. Results: We found a total of 436 patches under the closed canopy of Quercus mongolica-dominated deciduous forests in the surveyed transects from the five national parks. Of these patches, 75% occupied a whole slope area, resulting in an enormous area. The patch area tended to be larger in the southern parks. Half (219 patches) of the patches flowered massively. Among them, 76% bloomed in 2015, which was consistent with the results of the previous report. The flowering rate varied from park to park with that of Mt. Seorak being the highest. The culms of the flowering patches were significantly taller (F = 93.640, p < 0.000) and thicker (F = 61.172, p < 0.000). Following the event, the culms of the flowering patches declined, providing a good opportunity for the suppressed plant species. The concurrent massive flowering of the mature patches was believed to be triggered by some stress such as a spring drought. Conclusion: We confirmed that the rare synchronized flowering of S. borealis occurred with a peak in 2015 nationwide. In addition, we explored that S. borealis not only monopolized an enormous area, but also dominated the floors of the late-successional Q. mongolica-dominated deciduous forests. This presents a major problem for Korean forests. As it declined simultaneously after flowering, there are both possibilities of forest regeneration or resettlement of S. borealis by massively produced seeds.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.1
• /
• pp.61-73
• /
• 2021

Recently, the deterioration of water quality in Wonju stream has been reported due to the increase in diverse pollution sources along with community development and urbanization. Various types of attempts with a huge budget were made for better water quality so far, but its effectiveness is still doubted. In order to establish site-oriented measures for water quality improvement, the topographic and hydrologic factors were evaluated based on site inspection and survey. As the major streams merged into the Wonju stream, the Hwa and Heungyang streams were found to have higher pollution loads and contributions compared to other streams due to the scattered livestock farms and industries, and vulnerable land use. Notably, the discharge water from the Wonju Public Sewage Treatment Plant had the highest level of pollution load, impacting on the water quality of Wonju Stream. According to the SWAT model as water quality measures, the improvement effect of water quality in this treatment plant can be reached to the reductions in BOD 11.06%, T-N 23.56%, T-P 10.60% when the proper managements applied, whereas the improvement of water quality would be 3.89%, 1.23%, and 3.32% for BOD, T-N, T-P, respectively, for the industries. The reduction of the livestock industry was generally very high as a pollution source, but it was not much higher at the end of Wonju Stream than other measures. These results recommended that the water q uality improvement measures should be designated for each upper-middle-lower section in Wonju stream.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.6
• /
• pp.690-698
• /
• 2006

Statement of problems. The heat produced during polymerization of polymer-based provisional materials may cause thermal damage to the vital pulp. Purpose. This study was performed to evaluate the exotherm reaction of the polymerbased provisional materials during polymerization by differential scanning calorimetry and to compare the temperature changes of different types of resins. Material and methods. Three dimethacrylate-based materials (Protemp 3 Garant, Luxatemp Plus, Luxatemp Fluorescence) and five monomethacrylate- based material (Snap, Alike, Unifast TRAD, Duralay, Jet) were selected. Temperature changes of polymer-based provisional materials during polymerization in this study were evaluated by D.S.C Q-1000 (TA Instrument, Wilmington, DE, USA). The following three measurements were determined from the temperature versus time plot: (1) peak temperature, (2) time to reach peak temperature, (3) heat capacity. The data were statistically analyzed using one-way ANOVA and multiple comparison Bonferroni test at the significance level of 0.05. Results. The mean peak temperature was $39.5^{\circ}C({\pm}\;1.0)$. The peak temperature of the polymer-based provisional materials decreased in the following order: Duralay > Unifast TRAD, Alike > Jet > Luxatemp Plus, Protemp 3 Garant, Snap, Luxatemp Fluorescence. The mean time to reach peak temperature was 95.95 sec $({\pm}\;64.0)$. The mean time to reach peak temperature of the polymer-based provisional materials decreased in the following order: Snap, Jet > Duralay > Alike > Unifast TRAD > Luxatemp Plus, Protemp 3 Garant, Luxatemp Fluorescence. The mean heat capacity was 287.2 J/g $({\pm}\;107.68)$. The heat capacity of the polymer-based provisional materials decreased in the following order: Duralay > TRAD, Jet, Alike > Snap, Luxatemp Fluorescence, Protemp 3 Garant, Luxatemp Plus. Conclusion. The heat capacity of materials, determined by D.S.C., is a factor in determining the thermal insulating properties of restorative materials. The peak temperature of PMMA was significantly higher than others (PEMA, dimethacrylate). No significant differences were found among PEMA (Snap) and dimethacrylate (P >0.05). The time to reach peak temperature was greatest with PEMA, followed by PMMA and dimethacrylate. The heat capacity of PMMA was significantly higher than others (PEMA, dimethacrylate). No significant differences were found among PEMA and dimethacrylate (P >0.05).

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.3
• /
• pp.102-110
• /
• 2005

Piezoelectric transformers(PT) are expected to be small, thin and highly efficient, and which are attractive as a transformer with high power density for step down voltage. For these reasons, we have attempted to develop a step-down PT for the miniaturized adaptor. We propose a PT, operating in thickness extensional vibration mode for step-down voltage. This PT consists of a multi-layered construction in the thickness direction. In order to develop the step-down PT of 10 W class and turn ratio of 0.1 with high efficiency and miniaturization, the piezoelectric ceramics and PT designs are estimated with a variety of characteristics. The basic composition of piezoelectric ceramics consists of ternary yPb(Zr$_{x}$Ti$_{1-x}$)O$_{3}$-(1-y)Pb(Mn$_{1/3}$Nb1$_{1/3}$Sb$_{1/3}$)O$_{3}$. In the piezoelectric characteristics evaluations, at y=0.95 and x=0.505, the electromechanical coupling factor(K$_{p}$) is 58$\%$, piezoelectric strain constant(d$_{33}$) is 270 pC/N, mechanical quality factor(Qr$_{m}$) is 1520, permittivity($\varepsilon$/ 0) is 1500, and Curie temperature is 350 $^{\circ}C$. At y = 0.90 and x = 0.500, kp is 56$\%$, d33 is 250 pC/N, Q$_{m}$ is 1820, $\varepsilon$$_{33}$$^{T}$/$\varepsilon$$_{0}$ is 1120, and Curie temperature is 290 $^{\circ}C$. It shows the excellent properties at morphotropic phase boundary regions. PZT-PMNS ceramic may be available for high power piezoelectric devices such as PTs. The design of step-down PTs for adaptor proposes a multi-layer structure to overcome some structural defects of conventional PTs. In order to design PTs and analyze their performances, the finite element analysis and equivalent circuit analysis method are applied. The maximum peak of gain G as a first mode for thickness extensional vibration occurs near 0.85 MHz at load resistance of 10 .The peak of second mode at 1.7 MHz is 0.12 and the efficiency is 92$\%$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.9
• /
• pp.1235-1241
• /
• 2012

Antioxidant properties and antioxidant compound contents in different parts of 14 commercial mushrooms were evaluated. Methanolic extracts from the entire mushroom, the pileus and the stipe, separately, were screened for their DPPH and ABTS free radical scavenging activities. Total ubiquinones (Coenzyme Qs; CoQs), total phenolic, and flavonoid contents were determined, in order to assess the extract's antioxidant activity. The portion of the mushroom selected had an effect on the results, with pileus methanolic extract exhibiting the greatest antioxidant effect (p<0.05). The analyzed mushrooms contained powerful antioxidants such as phenols (144.5~536.6 mg of gallic acid equivalents, mg GAE/100 g of dried weight, dw), flavonoids (3.7~31.2 mg of quercetin equivalents, mg QE/100 g dw) and ubiquinones (65.6~485.1 ${\mu}g$/100 g dw). Content of CoQ9 and CoQ10 in the 14 commercial mushrooms varied from 23.1 to 256.2 ${\mu}g$/100 g and from 16.1 to 238.3 ${\mu}g$/100 g, respectively. Phellinus linteus showed the highest antioxidant activity among all species due to the contribution of antioxidants such as phenols (530.5 mg GAE/100 g dw) and ubiquinones (308.8 ug/100 g dw). A positive linear correlation was demonstrated between free radical scavenging activity and total phenolic ($R^2=0.79$) and ubiquinone ($R^2=0.59$) contents in the pileus of mushrooms (p<0.05). Our data indicate that commercial mushrooms have potential as dietary sources of CoQs and phenolic antioxidants.