• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.4
• /
• pp.285-291
• /
• 2008

Purpose: Although automatic quantification software of myocardial perfusion SPECT provides highly objective and reproducible quantitative measurements, there is still some limitation in the direct use of quantitative measurements. In this study we derived parameters using normal variation of perfusion measurements, and tried to test the usefulness of these parameters. Materials and Methods: In order to calculate normal variation of perfusion measurements on myocardial perfusion SPECT, 55 patients (M:F = 28:27) of low-likelihood for coronary artery disease were enrolled and $^{201}TI$ rest/$^{99m}Tc$-MIBI stress SPECT studies were performed. Using 20-segment model, mean (m) and standard deviation (SD) of perfusion were calculated in each segment. As a myocardial viability assessment group, another 48 patients with known coronary artery disease, who underwent coronary artery bypass graft surgery (CABG) were enrolled. $^{201}TI$ rest/$^{99m}Tc$-MIBI stress / $^{201}TI$ 24-hr delayed SPECT was performed before CABG and SPECT was followed up 3 months after CABG. From the preoperative 24-hr delayed SPECT, $Q_{delay}$ (perfusion measurement), ${\Delta}_{delay}$ ($Q_{delay}$ - m) and $Z_{delay}$ (($Q_{delay}$ - m)/SD) were defined and diagnostic performances of them for myocardial viability were evaluated using area under curve (AUC) on receiver operating characteristic (ROC) curve analysis. Results: Segmental perfusion measurements showed considerable normal variations among segments. In men, the lowest segmental perfusion measurement was $51.8{\pm}6.5$ and the highest segmental perfusion was $87.0{\pm}5.9$, and they are $58.7{\pm}8.1$ and $87.3{\pm}6.0$, respectively in women. In the viability assessment $Q_{delay}$ showed AUC of 0.633, while those for ${\Delta}_{delay}$ and $Z_{delay}$ were 0.735 and 0.716, respectively. The AUCs of ${\Delta}_{delay}$ and $Z_{delay}$ were significantly higher than that of $Q_{delay}$ (p = 0.001 and 0.018, respectively). The diagnostic performance of ${\Delta}_{delay}$, which showed highest AUC, was 85% of sensitivity and 53% of specificity at the optimal cutoff of -24.7. Conclusion: On automatic quantification of myocardial perfusion SPECT, the normal variation of perfusion measurements were considerable among segments. In the viability assessment, the parameters considering normal variation showed better diagnostic performance than the direct perfusion measurement. This study suggests that consideration of normal variation is important in the analysis of measurements on quantitative myocardial perfusion SPECT.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.179-186
• /
• 2013

Purpose: To compare corneal asphericity, visual acuity (VA), and ocular and corneal higher-order aberrations (HOAs) between myopic refractive surgery and emmetropia groups. Methods: Twenty three subjects ($23.0{\pm}2.5$ years) who underwent myopic refractive surgery and twenty emmetropia ($21.0{\pm}206$ years) were enrolled. The subjects'criteria were best unaided monocular VA of 20/20 or better in both two groups. High and low contrast log MAR visual acuities were measured under photopic and mesopic conditions. Corneal and ocular HOAs were measured using Wavefront Analyzer (KR-1W, Topcon) for 4 mm and 6 mm pupils. Corneal asphericity was taken by topography in KR-1W. Results: There was no significant difference in VA between two groups under either photopic or mesopic conditions. In ocular aberrations, there were significant differences in total HOAs, fourthorder and spherical aberration (SA) for a 6 mm between two groups (p=0.045, p<0.001, and p<0.001, respectively). In corneal aberrations, there was a significant difference in SA for 4 mm (p=0.001) and 6 mm (p<0.001) pupils between two groups and there were statistically significant differences in total HOAs (p<0.001) and fourth-order aberrations (p<0.001) between two groups for a 6 mm pupil. There was a significant correlation in emmetropia between Q-value and SA in ocular aberrations for 4 mm and 6 mm pupils (r=0.442, p=0.004, and r=0.519, p<0.001) and in corneal aberrations for 4 mm and 6 mm pupils (r=0.358, p=0.023, and r=0.646, p<0.001). No significant correlations were found between Q-value and SA in refractive surgery group. Conclusions: VA in myopic refractive surgery is better than or similar to emmetropia. Nevertheless, the more increasing pupil size is, the more increasing aberrations are. Thus, it could have an influence on the quality of vision at night.

• Journal of People, Plants, and Environment
• /
• v.22 no.5
• /
• pp.481-488
• /
• 2019

The purpose of this study is to suggest how to manage healing forests. Field investigation and surveys were conducted to produce results and 313 questionnaires collected from workers in the forestry sector and ordinary people were analyzed. The results were as follows: it is required to preserve flowering plants, scenic trees, and ecological trees in the understory vegetation, and to remove trees that block the forest landscape, leaving about 50 to 60 percent of the understory vegetation. The preferred density order of broadleaf trees was analyzed as follows: Betula platyphylla > Liriodendron tulipifera > Quercus acutissima. The preferred density order of coniferous trees was analyzed as follows: Abies holophylla > Cryptomerias japonica and Chameacyparis obtusa > Larix kaempferi > Pinus densiflora > Pinus koraiensis. The preferred density in healing forests was 81-89% compared to the number of residual trees for quantitative thinning. Specifically, the preferred density were 87% for P. koraiensis, 86% for L. kaempferi, 81% for P. densiflora, 83% for C. japonica, 84% for C. obtusa and 89% for Q. acutissima. In the case of healing forests, it is recommended to periodically conduct a small-scale thinning with different densities according to the species and diameter of trees based on the results of this study.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.2
• /
• pp.123-129
• /
• 2000

This paper desclibes a design method and test results of grid-connected photovoltaic power 당eneration s systems, which consists of solar cells, DCI AC inverter, utility grid. A 50 kW photovoltaic power generation s system including a 3-phase DCI AC inverter is designed and made in order to investigate the system l pelionnance for glid connection. Also the control scheme of a three phase cmrent-controlled PWM inverter W with PI controller is presented by using d-q transformation. The experimental waveforms show that the p proposed system has stable behavior with em unit power factor in utility-interactive operation.

• Communications of the Korean Mathematical Society
• /
• v.9 no.4
• /
• pp.917-926
• /
• 1994

Let ($M, G_M, F$) be a (p+q)-dimensional Riemannian manifold with a foliation F of codimension q and a bundle-like metric $g_M$ with respect to F ([9]). Aside from the Laplacian $\bigtriangleup_g$ associated to the metric g, there is another differnetial operator, the Jacobi operator $J_D$, which is a second order elliptic operator acting on sections of the normal bundle. Its spectrum isdiscrete as a consequence of the compactness of M. The study of the spectrum of $\bigtriangleup_g$ acting on functions or forms has attracted a lot of attention. In this point of view, the present authors [7] have studied the spectrum of the Laplacian and the curvature of a compact orientable cosymplectic manifold. On the other hand, S. Nishikawa, Ph. Tondeur and L. Vanhecke [6] studied the spectral geometry for Riemannian foliations. The purpose of the present paper is to study the relation between two spectra and the transversal geometry of cosymplectic foliations. We shall be in $C^\infty$-category. Manifolds are assumed to be connected.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.255-256
• /
• 2007

In the study, in order to develop low temperature sintering ceramics for multilayer piezoelectric actuator, PMN-PNN-PZT ceramics were fabricated using $Na_2CO_3,\;Li_2CO_3$ as sintering aids and their dielectric and piezoelectric properties were investigated according to the variations of $MnO_2$ as additives and sintering aids. At the sintering temperature of $900^{\circ}C$ and 0.1wt% $MnO_2$ as sintering aids, density, electromechanical coupling factor$(k_p)$, mechanical quality factor$(Q_m)$, piezoelectric constant$(d_{33})$, and dielectric constant $({\varepsilon}_r)$ showed the optimum value of $7.87[g/cm^3]$, 0.61, 1131, 1127 and 376, respectively, for multilayer piezoelectric actuator application.

• The Korean Journal of Mycology
• /
• v.8 no.1
• /
• pp.63-68
• /
• 1980

${\beta}-Lactamase$ was isolated from the culture filtrate of the penicillin producing strain, Penicillium chrysogenum Q176. When the pH of the medium was adjusted to 5.0 at the start of culture, a rapid increase in pH accompanied by the synthesis of penicillin was observed in the first $2{\sim}4$ days. When the pH of medium was brought to 6.0 or 7.0 the opposite was observed: high yield of the enzyme and little of the antibiotics in the medium. The optimum enzyme activi­ty was at a temperature of $40^{\circ}C$ and around pH 7.0. A partially purified enzyme was assayed on several different substrates including penicillins V and G, 6-aminopenicillanic acid, cephalospo­rin C. The V max values calculated were 24.5, 20.4, 7.6, and 6.1 mmoles/hour, and the $K_m$, values were 16.4, 12.6, 7.5, and 6.9 mM in the order given.

• Korean Journal of Environment and Ecology
• /
• v.25 no.1
• /
• pp.37-46
• /
• 2011

This study was written about the actual vegetation map by researchig current vegetation and on-site vegetation in the Deogyusan National Park. Current vegetation patterns were classified into 42 types according to correlation. And Quercus mongolica forest was 39.08% out of the total forest vegetation, and was dispersed the most widely. Next were Q. variabilis, Pinus densiflora, and Fraxinus mandshurica forests in order, so that the forests of Deogyusan are different from those of another national parks in that F. mandshurica forest is more widely dispersed. Forest vegetation of Deogyusan national park is broadly classified into three types: deciduous broad-leaved forest (Quercus forest and valley forest), coniferous forest(P. densiflora forest), and sub-alpine forest(Taxus cuspidata forest, Abies koreana, Rhododendron schlippenbachii shrub-forest, and prairie). Distribution of DBH of Q. mongolica and Q. variabillis had a higher frequency of young individuals and middle individuals, Q. serrata and Carpinus laxiflora had a higher frequency of young individuals, suggesting a continuous domination of these species over the other species for the time being. In contrast, F. mandshurica appeared limited to the valley of the sheet and a higher frequency of young individuals, suggesting a continuous domination of these species the development of a climax forest terrain. P. densiflora, Betula davurica, Cornus controversa, B. costata, A. koreana and T. cuspidata had a formality distribution, suggesting a continuous domination of these species over the other species for the time being.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.20 no.1
• /
• pp.4575-4591
• /
• 1978

In order to investigate the effects of grain size distribution, cement content, and molding pressure on the strength and durability of soil-cement mixtures, a laboratory test of soil cement mixtures was performed at four levels of cement content, five levels of molding pressure, and four levels of normal curing periods. The results are summarized as follows: 1. Optimum moisture contents in loam soil and maximum dry density in sand soil increased with the increase of cement content, but in others, both optimum moisture contents and maximum dry density were changed ununiformly. 2. When the specimens were molded with molding pressure, 50kg/$\textrm{cm}^2$, strength of soil cement mixture with cement content, 2 and 4 per cent, was lower than the strength of soil cement mixture without cement content by more than 40 to 50 per cent. 3. The strength of soil-cement molded with molding pressure, 100kg/$\textrm{cm}^2$, was higher than the strength of soil-cement molded with M.D.D. obtained from standard compaction test more than 40 per cent in sand loam cement and 50 per cent in loamy cement. 4. There was highly significant positive correlation among molding pressure, cement content and unconfined compressive strentgh and so the following multiple regression equations were obtained. Loam: fc=1.9693C+0.197P-0.84 Sandy loam: fc=2.9065C+0.235P-0.77 5. When the specimens were molded with molding pressure, 20 to 100kg/$\textrm{cm}^2$, the regression equation between the 28-day and 7-day strenght was obtained as follows. Loam : q28=1.1050q7+7.59(r=0.9147) Sandy loam : q28=1.3905q7+3.17 (r=0.9801) 6. At the cement contents of above 50 per cent, the weight losses by freeeze-thaw test were negligible. At the cement content of below 8 per cent the weight losses were singnificantly high under low molding pressure and remarkably decreased with the increase of molding pressure up to 80kg/$\textrm{cm}^2$. 7. Resistance to damage from water and to absorption of water were not improved by molding pressure alone, but when the soil was mixtured with cement above 6 per cent, damage seldoms occurred and absorbed less than 5 per cent of water. 8. There was highly significant inverse-corelationship between the compressive strength of soil cement mixtures and their freeze-thaw loss as well as water absorption. By the regression equation methods, the relationships between them were expessed as followed fc=-7.3206Wa+115.6(r=0.9871) log fc=-0.0174L+1.59(r=0.7709) where fc=unconfined compressive stregth after 28-days curing. kg/$\textrm{cm}^2$ Wa=water absorption, % L : freeze-thaw loss rate, %

• Korean Journal of Ecology and Environment
• /
• v.46 no.2
• /
• pp.234-240
• /
• 2013

Increasing global $CO_2$ concentration and temperature is leading to the phenomenon of global warming and impacting the growth of plants. In order to determine the effects of global warming on the woody plants of Korea, five woody species, Pinus densiflora (Korea's dominant species), Ginkgo biloba (a commonly used street tree), Quercus glauca (dominant species in sub-tropical forests), Quercus gilva and Abeliophylum distichum (both endangered species), were grown at control (ambient $CO_2$+ambient temperature) and treatment (elevated $CO_2$+elevated temperature) conditions in a glasshouse, and were monitored for their ecological response. Shoot lengths and number of leaves were measured once a month from April to October in 2010, and were again measured in November 2011. Shoot lengths of P. densiflora, G. biloba and Q. glauca were not significantly affected by elevated $CO_2$ and temperature conditions. However. those of Q. gilva and A. distichum were both higher for plants grown under treatment than for those grown under control. The number of leaves of five woody species was not significantly affected by elevated $CO_2$ and temperature. These results indicate that P. densiflora, G. biloba and Q. glauca react more favorably than Q. gilva and A. distichum (each of which are designated as endangered plants) under global warming situations.