• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.130-132
• /
• 2005

Tungsten carbon nitride (W-C-N) thin films were produced by reactive radio frequency (RF) magnetron sputter-ing of tungsten in $Ar-N_2$ gas mixture. The effects of the variation of nitrogen partial pressure on the composition, and structural properties of these films as well as the influence of post-deposition annealing have been studied. When $La_{0.67}Sr_{0.33}MnO_3$ was coated on the W-C-N/Si substrate, coercivity ($H_c$) and magnetization at room temperature shows 58.73 Oe, and 29.4 emu/cc, respectively. In order to improve the diffusion barrier characteristics, we have studied the impurity behaviors to control the ratios of nitrogen and carbon concentrations.

• Advances in materials Research
• /
• v.13 no.3
• /
• pp.161-171
• /
• 2024

This study aimed to investigate the effect of physicochemical properties and mix ratios of iron ore (oxide feed): coke (reductant) on the carbothermic reductions of iron ore. Coke size was fixed at ≤63 ㎛ while iron ore size varied between 150-63 ㎛ and ≤63 ㎛ respectively. Mix ratios were changed from 100:0 (reference) to 80:20 and 60:40 while the temperature, heating rate and soaking duration in muffle furnace were fixed at 1100 ℃, 10 ℃/min and 1 hour. Particle size analyzer, XRF, CHNS and XRD analyses were used for determination of raw feed characteristics. The occurrence of phase transformations from various forms of iron oxides to iron during the carbothermal reductions were identified through XRD profiles and supported with weight loss (%). XRF analysis proved that iron ore is of high grade with 93.4% of Fe₂O₃ content. Other oxides present in minor amounts are 2% Al₂O₃ and 1.8% SiO₂ with negligible amounts of other compounds such as MnO, K₂O and CuO. Composite pellet with finer size iron particles (≤63 ㎛) and higher carbon content of 60:40 exhibited 45.13% weight lost compared to 32.30% and 3.88% respectively for 80:20 and 100:0 ratios. It is evident that reduction reactions can only occur with the presence of coke, the carbon supply. The small weight loss of 3.88% at 100:0 ratio occurs due to the removal of moisture and volatiles and oxidations of iron ore. Higher carbon supply at 60:40 leads into better heat and mass transfer and diffusivity during carbothermic reductions. Overall, finer particle size and higher carbon supply improves reactivity and gas-solid interactions resulting in increased reductions and phase transformations.

• Journal of Magnetics
• /
• v.5 no.3
• /
• pp.90-98
• /
• 2000

The change in the magnetic properties of a spin-valve multilayer with the structure IrMn (9 m)/CoFe (4 nm)/Cu (2.6 nm)/CoFe (2 nm)/NiEe (6 nm) is investigated as a function of the size and the aspect ratio. At a fixed aspect ratio (the length/width ratio) of 2, the magnetostatic interactions begin to affect the magnetic properties substantially at a spin-valve length of 5 $\mum$, and, at a length of 1 $\mum$, they become even more dominant. In the case of a fixed multilayer size (2.4 $\mum$) which is indicated by the sum of the length and the width, magnetization change occurs by continuous spin-reversal and M-H loops are characterized by no or very small hysteresis at aspect ratios smaller than unity, At aspect ratios greater than unity, magnetization change occurs by spin-flip resulting in squared hysteresis loops. A very large changes in the coercivity and the bias field is observed, and these results are explained by two separate contributions to the total magnetostatic interactions: the coercivity by the self-demagnetizing field and the bias field by the interlayer magnetostatic interaction field.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.4
• /
• pp.237-246
• /
• 2003

This pot experiment was conducted in order to find out the effects of application of combined micronutrients(T$_1$: control. T$_2$; Fe, T$_3$; Fe+Mn, T$_4$； Fe＋Mn＋Cu, T$_{5}$; Fe+Mn+Cu＋Zn, T$_{6}$；Fe+Mn+Cu＋Zn+Mo, T$_{7}$； Fe+Mn+Cu+Zn+Mo+B) on forage performance of pure and mixed cultures of orchardgrass and white clover The 2nd part was concerned with the changes in the forage yields and concurrence index. The results obtained are summarized as follows: 1. The effects of combined micronutrient applications on the forage yields were different according to the forage species, whether it was a pure or mixed cultures, and additional fertilization(especially N). The effects of them on the forage productivity and botanical composition were more obvious in white clover, especially in mixed culture, than in orchardgrass. By the significant role of B as a regulator, the yields of both forages were best in the T$_{7}$, respectively. 2. In the pure culture, the high yields of both forages were obtained by the T$_{7}$ and T$_2$, whereas the T$_{6}$ and T$_3$resulted in the low yields. The best yields of both forages were obtained by the T$_{7}$ with relatively optimum ratios among the micronutrients as follows; Fe/Mn/Cu/Zn, Fe/Mo, Mo/B, and ∑ cation/∑anion. It was observed the multiple interaction of Fe${\times}$Mn${\times}$Mo${\times}$B, and the significant role of B as a regulator. The effects of them on white clover were more distinct at no additional fertilization than at the additional fertilization(especially N). 3. In mixed culture, the optimum applications of them resulted in the positive increase of yield and botanical composition of white clover, whereas orchardgrass tended to be inversely except the T$_{7}$.X> 7/. 7/.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.5
• /
• pp.322-328
• /
• 2004

Available nutrients in soil solution play key roles on the growth of plants, but the equilibria in soil solution can be disturbed by acid precipitation. In this study, we investigated the relationships between element concentrations in the needles of Pinus thunbergii and chemical properties of forest soil solutions in the industrial complexes as an effort to find the possible limiting factor(s) causing the forest decline. The Ca/Al molar ratios in needles of Pinus thunbergii collected from the control sites were 18. However, at Onsan and Ulsan industrial complexes, those were decreased to the ranges from 10 to 11 for the one-year old needles and from 9 to 10 for the two-year old needles. The Mg/Al molar ratios showed similar tendencies with the Ca/Al molar ratios of the needles of Pinus thunbergii. In the A horizon, there existed a significant correlation between Mg concentrations in the needles of Pinus thunbergii and Ca/Al molar ratio of forest soil solution. Calcium concentrations in the needles of Pinus thunbergii in the B horizon were also significantly correlated with Ca/Al molar ratios of forest soil solutions. The uptakes of Ca and Mg by Pinus thunbergii were mainly limited by Al in the soil solutions of the A horizon and by Mn and Al in the soil solutions of the B horizon.

• Economic and Environmental Geology
• /
• v.46 no.5
• /
• pp.375-390
• /
• 2013

The Kenticha rare-element (Ta-Li-Nb-Be) mineralized zone is located in ophiolitic fold and thrust complex of southern Ethiopia and was firstly discovered by joint exploration program of Ethiopia-Soviet in 1980s. It includes Dermidama, Kilkele, Shuni Hill, Kenticha, and Bupo pegmatites from south to north. The Kenticha pegmatite intruded parallel to NS-striking serpentinite and talc-chlorite schist, and is exposed approximately 2 km length and 400-700 m width. The Kenticha pegmatite is internally zoned and subdivided into lower quartz-muscovite-albite granite, intermediate muscovite-quartz-albite-microcline pegmatite, and upper spodumene-quartz-albite pegmatite, based on their mineral assemblage. The major, trace elements (e.g., Rb, Li, Nb, Ta, and Ga), and element ratios (e.g., K/Rb, Nb/Ta, Mg/Li, and Al/Ga) suggest that the fractionation and solidification of pegmatite have progressed from the lower towards upper pegmatite. In contrast, unlike general magmatic fractionation, Mg/Li ratios of the Kenticha pegmatite tend to be increased towards the upper pegmatite. It may result from post-magmatic hydrothermal alteration and/or interaction with upper ultramafic rock. Rare-element mineralization in Kenticha pegmatite concentrates on the upper pegmatite, which contains up to 3.0 wt % $Li_2O$, 3,780 ppm Rb, 111 ppm Cs, 1,320 ppm Ta, and 332 ppm Nb. Ore minerals in Kenticha pegmatite mostly include tantalite, spodumene, and lepidolite, and tantalite has an association with coarser quartz-spodumene and relatively fine sacchroidal albite. The tantalite is classified into Mn-tantalite as a function of $Mn^*[Mn/(Mn+Fe)]$ and $Ta^*[Ta/(Ta+Nb)]$ values. Its compositions ($Mn^*$, $Ta^*$, and Nb/Ta) between coarse and fine tantalites are different and the former is strongly enriched in Ta and depleted in Nb compared to latter one. In conclusion, rare-element mineralization in the Kenticha pegmatite may has occurred in the latest stage of magmatic fractionation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.9
• /
• pp.1291-1297
• /
• 2006

The potential of the spot urine sampling technique as an alternative to performing a total urine collection to predict the microbial nitrogen supply was evaluated in crossbred bulls. In a completely randomized design, 20 growing crossbred bulls were assigned four levels of feed intake (120, 100, 80 and 60% of voluntary dry matter intake) on diets comprised of wheat straw and concentrate mixture (50:50). After three months of experimental feeding, a metabolism trial was conducted for ten days, during which spot urine collections were performed every 6 h post feeding on days 9 and 10. The daily urinary excretion of allantoin (A) and purine derivatives (PD) decreased with the reduction in feed intake while creatinine (C) excretion remained similar in animals fed at different levels. The microbial nitrogen (MN) supply calculated from the PD excreted in total urine (35.08 to 72.08 g/d) was higher at increased levels of feed intake. PD concentration in spot urine samples had poor correlation with feed intake except at 12 h post feeding. A/C ratio and PD/C ratio in spot urine samples remained similar irrespective of sampling time and significantly (p<0.01) correlated with daily urinary PD excretion, digestible organic matter intake and dry matter (DM) intake. However, no significant differences were evident in these ratios among animals fed at levels 120, 100 and 80% of voluntary dry matter intake (VDMI) at different times post feeding. These results suggests that the spot urine sampling technique to predict the microbial protein supply is not suitable for detecting small differences in MN supply and hence, estimation of PD excreted in total urine (mmol/d) is necessary to assess precisely the MN supply in crossbred bulls.

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.958-967
• /
• 2023

This work studies the defect features in a dilute FeMnNi alloy by an Object Kinetic Monte Carlo (OKMC) model based on the "grey-alloy" method. The dose rate effect is studied at 573 K in a wide range of dose rates from 10^-8 to 10^-4 displacement per atom (dpa)/s and demonstrates that the density of defect clusters rises while the average size of defect clusters decreases with increasing dose rate. However, the dose-rate effect decreases with increasing irradiation dose. The model considered two realistic mechanisms for producing <100>-type self-interstitial atom (SIA) loops and gave reasonable production ratios compared with experimental results. Our simulation shows that the proportion of <100>-type SIA loops could change obviously with the dose rate, influencing hardening prediction for various dose rates irradiation. We also investigated ways to compensate for the dose rate effect. The simulation results verified that about a 100 K temperature shift at a high dose rate of 1×10^-4 dpa/s could produce similar irradiation microstructures to a lower dose rate of 1×10^-7 dpa/s irradiation, including matrix defects and deduced solute migration events. The work brings new insight into the OKMC modeling and the dose rate effect of the Fe-based alloys.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.65-71
• /
• 2013

This research was conducted to evaluate the influence of $NO_3{^-}:NH_4{^+}$ ratios in fertilizer solution on the vegetative growth and fruit yield of hot pepper (Capsicum annuum L.) through pot cultivation. The Hoaglad's solution was modified to contain various $NO_3{^-}:NH_4{^+}$ ratios such as 100:0 (A), 73:37 (B), 50:50 (C), 27:73 (D), 0:100 (E), and no nitrogen (F). Plants were transplanted into root substrates and the modified solutions were applied as plant needed in plastic house. There were no statistical significances among the treatments from A through D in the fresh and dry weights, and number of leaves 31 days after transplanting, but elevation of $NH_4{^+}$ ratios in the solution decreased the fresh fruit weight 62 days after transplanting with statistical differences. In the results of inorganic element analysis based on the dry weight of fully expanded mature leaves, N and P contents as well as micro cations such as Fe, Mn, Zn, and Cu increased as $NH_4{^+}$ ratios were elevated 62 days after transplanting. However, those of macro cations such as K, Ca, and Mg resulted in decreasing tendency. The elevation of $NH_4{^+}$ ratios in fertilizer solution resulted in the increase of EC and total N concentrations ($NO_3{^-}+NH_4{^+}$), but this decreased the pH as well as Ca and Mg concentrations in soil solution 62 days after transplanting. The K concentration in soil solution was the highest in the treatments of C and followed by D, B, E, and A. The above results indicate that the proper $NO_3{^-}:NH_4{^+}$ ratio in the nutrient solution is 73:27 (B) or 100:0 (A) and the B solution is proper for the vegetative growth and that of A is proper for reproductive growth stage.

• Journal of the Korean Magnetics Society
• /
• v.1 no.1
• /
• pp.25-29
• /
• 1991

It has been found that the as-quenched ribbons of $Sm_{x}Fe_{100-x-y}Ti_{y}(3.8{\leq}x{\leq}11.5,\;3.8{\leq}y{\leq}19.2)$ are composed of metastable $TbCu_{7}-type$ structure, ${\alpha}-(Fe,\;Ti),\;Fe_{2}Ti$ and an unknown phase accompanying strong diffraction line at $d=2.14{\AA}$. The metastable $TbCu_{7}-type$ phase, which was formed by rapid quenching, did not transform fully to the stable phases after annealing at $850^{\circ}C$ for 45 minutes except the one existed in $SmFe_{11}Ti$ melt-spun ribbon. The $SmFe_{11}Ti$ melt-spun ribbon, annealed at $850^{\circ}C$ for 45 minutes in vacuum, was found to be composed of $ThMn_{12}$. $\alpha$-(Fe, Ti) and $Fe_{2}Ti$ phases. The formation of $\alpha$-(Fe, Ti) and $Fe_{2}Ti$ phases in this melt-spun ribbon was due to the evaporation of Sm atoms during the high temperature annealing. The atomic ratios for the surface and the inside of $SmFe_{11}Ti$ melt-spun ribbon annealed in vacuum were $SmFe_{25.8}Ti_{2.6}$ and $SmFe_{11.7}Ti_{1.0}$ respectively. It is thought to be that much of $\alpha$-(Fe, Ti) and $Fe_{2}Ti$ phases exist on the surface of ribbon.