• 한국항해항만학회지
• /
• 제43권2호
• /
• pp.93-100
• /
• 2019

In 2001, about 20 years after the introduction of the standard buoys, the natural environment and maritime traffic flow changes in the waters near Korea and the necessity of improvement of the AtoN (Aids to Navigation) maintenance was suggested. The IALA provides guidelines for maintenance and management of AtoN, and Korea provides guidelines for the management and operation of standard buoys by means of the Enforcement on the AtoN laws. The objective of this study was to investigate the installation status and the repair status of the standard type buoys by sea area in order to improve the management and operation of the steel standard buoys. In addition, a survey was conducted on the improvement of the steel buoy fouling and the improvement of the lifting inspection cycle towards on the AtoN managers and producers of the representative authority by sea area. In the case of LL-26 (M) buoy type, the standard type buoy installation status of Korea in 2017 was 57.1%, and the LL-26 (M) type was 58.9% showing the highest repair rate. According to the results of the survey on buoys fouling, 51.2% were caused by the attachment of shellfish, and 43.2% were caused by bird feces. The results of the survey on the improvement of the regular buoy inspection cycle showed that the measures are to maintain the current inspection period of 2 years regardless of the characteristics of the sea area (water depth, inside and outside port, buoy size, etc.).

• Journal of Nutrition and Health
• /
• 제40권7호
• /
• pp.639-649
• /
• 2007

This study was performed to investigate the effects of very low calorie diet (VLCD) using meal replacements that contain the wild grass extracts based on Samul-tang ingredients on psychological factors and quality of life in the obese women $(BMI{\geq}25kg/m^2)$ for four weeks. Seventy five women $(20{\leq}age<26)$ participated in this experiment. Subjects were randomly classified three groups: 1) General diet group (GD roup, n=27) consumed 3 regular meals within 600 kcal/day 2) Meal replacements group (MR group, n=27) consumed 1 regular meal and 2 meal replacements within 600 kcal/day 3) Herbal Meal replacements group (HMR group, n=27) consumed 1 regular meal and 2 meal replacements within 600 kcal/day. Physical factors (weight, BMI, fat (%)) of the HMR group significantly decreased more than those of GD and MR groups. Moreover, binge eating habit and environmental factors (surrounding support, emotional reaction, expression of opinion) of the HMR group significantly decreased more than those of GD and MR groups. Psychological factor and quality of life were no significant differences among three groups during the experimental period, because both were significantly decreased in all groups after 4 weeks. Therefore, very low calorie diet using meal replacements that contain the wild grass extracts based on Samul-tang ingredients for 4 weeks was effective on improvement of psychological factor and quality of life as well as weight reduction in the obese premenopausal women.

• The Journal of Advanced Prosthodontics
• /
• 제9권4호
• /
• pp.287-293
• /
• 2017

PURPOSE. To compare the dimensional accuracy of three impression techniques- a separating foil impression, a custom tray impression, and a stock tray impression. MATERIALS AND METHODS. A machined mandibular complete-arch metal model with special modifications served as a master cast. Three different impression techniques (n = 6 in each group) were performed with addition-cured silicon materials: i) putty-wash technique with a prefabricated metal tray (MET) using putty and regular body, ii) single-phase impression with custom tray (CUS) using regular body material, and iii) two-stage technique with stock metal tray (SEP) using putty with a separating foil and regular body material. All impressions were poured with epoxy resin. Six different distances (four intra-abutment and two inter-abutment distances) were gauged on the metal master model and on the casts with a microscope in combination with calibrated measuring software. The differences of the evaluated distances between the reference and the three test groups were calculated and expressed as mean (${\pm}SD$). Additionally, the 95% confidence intervals were calculated and significant differences between the experimental groups were assumed when confidence intervals did not overlap. RESULTS. Dimensional changes compared to reference values varied between -74.01 and $32.57{\mu}m$ (MET), -78.86 and 30.84 (CUS), and between -92.20 and 30.98 (SEP). For the intra-abutment distances, no significant differences among the experimental groups were detected. CUS showed a significantly higher dimensional accuracy for the inter-abutment distances with -0.02 and -0.08 percentage deviation compared to MET and SEP. CONCLUSION. The separation foil technique is a simple alternative to the custom tray technique for single tooth restorations, while limitations may exist for extended restorations with multiple abutment teeth.

• 대한임상검사과학회지
• /
• 제48권3호
• /
• pp.183-187
• /
• 2016

본 연구는 국가자료인 2012년도 국민건강영양조사 자료를 이용하여 20세 이상 성인(n=4,948)에서 뇨 중 microalbumin과 맥압(Pulse pressure, PP)의 관련성을 평가하고자 실시하였다. 연구결과에서 연령, 성별, 흡연습관, 음주습관, 운동습관, WM, BMI, TC, TG, HDL-C, FBG, BUN, creatinine, 및 요 중 creatinine 등을 보정하였을 때, 뇨 중 microalbumin평균값에서, High PP (PP>60.0 mmHg) [$33.02{\pm}4.93{\mu}g/mL$ (95% confidence interval (CI), 23.37~42.68)]가 Normal PP ($PP{\leq}60.0mmHg$) [$22.57{\pm}1.63{\mu}g/mL$ (95% CI, 19.36~25.77)]에 비하여 유의하게 높았다(p=0.047). 결론적으로 대한민국 성인에서 PP의 증가는 뇨 중 microalbumin의 증가와 유의한 관련성이 있었다.

• 상하수도학회지
• /
• 제14권3호
• /
• pp.271-280
• /
• 2000

This study was conducted to determine the applicable loading rate and to evaluate the possibility of using limestones as an alkalinity source for the removal of ${NO_3}^{-}-N$ remaining after denitrification/nitrification process with the down-flow sulfur packed bed reactor(SPBR). The pretreated sewage was fed to SPBR. Three SPBRs were filled with elemental sulfur particles and limestones and the volumetric ratios of sulfur to limestone were 0%, 12.5% and 25% for R-0%, R-12.5% and R-25%, respectively. The applicable loading rate was evaluated increasing flow rate with influent ${NO_3}^{-}-N$ concentration of 20 mg/L. For R-0% with external alkalinity supply, denitrification efficiency was greater than 96% up to loading rate of $354.8g\;{NO_3}^{-}-N/m^3{\cdot}day$, and corresponding EBCT was 1.4hr. For R-12.5% and R-25%, where alkalinity was supplied by the limestone filled in the reactor, denitrification efficiency was greater than 94% up to loading rate of $283.8g\;{NO_3}^{-}-N/m^3{\cdot}day$, and corresponding EBCT was 1.7hr. The slightly better performance of R-12.5 compared to R-25 suggests that the volumetric sulfur to limestone ratio of 12.5% was enough for the supply of alkalinity required for sulfur-utilizing denitrification. DO was appeared not showing inhibitory effect on sulfur-utilizing denitrification. The clogging of SPBR caused by the produced gas can effectively be eliminated by regular introduction of treated water in up-flow mode.

• 디지털융복합연구
• /
• 제17권5호
• /
• pp.399-405
• /
• 2019

본 연구 목적은 유산소운동과 크리신섭취가 고지방식이동물의 간 조직에서 비만억제 효과를 규명하는데 있다. 집단은 정상식이, 고지방식이, 고지방식이와 크리신섭취, 고지방식이와 유산소운동 4집단으로 하였다. 크리신은 체중당 50mg/kg을 구강투여 하였고, 유산소운동은 트레드밀운동으로 주5회 60분 16주간 실시하였다. SPSS(20.0)프로그램을 이용해 일원변량분석(One-way ANOVA)을 하였고, 사후분석은 LSD로 하였다. 연구결과 간 조직에서 대식세포 마커 F480와 M1대식세포 마커 CD11c는 정상식이 그룹과 비교해 고지방식이, 크리신투여 그룹에서 유의하게 증가했고 운동집단에서는 유의하게 감소하였다. 지방분해 마커 PRDM은 정상식이집단과 비교해 고지방식이, 크리신투여 집단에서 유의하게 감소했으나 운동집단에서만 유의하게 증가하였다. 결론적으로 고지방식이와 중강도 운동은 간 조직에서 발생되는 대사적불균형을 억제하는데 효과적인 것으로 나타났다. 하지만 고지방식이와 크리신 섭취는 비만억제 기능이 미비한 것으로 나타났다. 따라서 향후 기능성식품을 이용한 비만개선 연구는 투여용량, 기간 등을 고려해 다양한 분자적 기전을 살펴보는 연구가 보강되어야 할 것이다.

• 한국통신학회논문지
• /
• 제29권3A호
• /
• pp.331-336
• /
• 2004

본 논문에서는 보다 빠른 연산동작의 구현을 위해 시스템 복잡도를 개선한 새로운 GF(2$^{m}$ ) 승산기를 제안한다. m차 기약 AOP가 갖는 특성으로부터 승산 중 발생하는 모듈러 환원의 과정을 순환이동 특성으로 간략화 하였고, 이후 AND와 XOR 게이트들의 배열구조를 사용하여 승산을 이루도록 하였다. 본 논문에서 제안한 승산기는 m(m+1)개의 2-입력 AND게이트와 (m+1)$^2$개의 2-입력 XOR게이트만으로 구성되며 연산에 소요되는 지연시간은 Τ$_{A+}$〔lo $g_2$$^{m}$ 〕Τ$_{x}$ 이다. 제안된 승산기와 타 승산기를 비교하여 그 결과를 보였고, 비교 결과 회고구성 및 복잡도 개선에 우수한 특성을 가지며 VLSI 구현에 적합함을 확인하였다.다.

• 한국수산과학회지
• /
• 제28권2호
• /
• pp.194-201
• /
• 1995

본 실험에서는 자루그물의 구조와 형상 및 사용 그 물감의 규격의 변화에 따른 저항의 변화를 조사하고, 그 저항이 전보에서 구한 저항식에 의해 정도 높게 해석되는가를 확인하기 위하여, 유연도가 큰 Nylon 그물감으로 자루그물을 사각추형으로 설계하고 상기 각 요소들을 변화시켜 회류수조(관측부 길이 : 7.00m, 수로 폭 : 1.45m, 수심 : 1.20m)에서 유속 v에서 받는 저항 R을 측정한 후, $R=kSv^2$(S: 그물 벽의 면적)에 의해 저항계수 $k(kg\;\cdot\;sec^2/m^4)$를 구하고 k로써 각각의 경우를 비교하였다. 실험에서 얻어진 결과를 요약하면 대략 다음과 같다. 1) 정사각추형으로 설계된 자루그물의 입구를 둘레가 서로 같은 원형 틀과 정사각형 틀에 교대로 부착하면, 수중 형상은 원형 틀에서는 매끈한 원추형이 되고 정각각형 틀에서는 입구 주변만을 제외한 나머지 모든 부분이 원추형이 되었기 때문에, k값에는 별다른 차리가 생기지 않았다 또한, 직편각추형으로 설계된 자루그물을 직체각형 틀에 부착하면 입구 주변만을 제외한 나머지 모든 部分이 타원추형이 되었는데, 그 때의 k값은 정사각추형으로 설계된 그물이 수중에서 원추형을 이루는 경우와 거의 같았다. 2) 정사각추형으로 설계된 자루그물에 대해 발의 길이 1에 대한 지름 d의 비 d/1를 변화시키면 k는 d/1가 큰 그물일수록 커지는 경향이었고, 입구 면적 $S_m$ 및 그물감의 재료는 일정하게 하고 $S/S_m$ 또는 흐름에 대한 그물의 영각 $\theta$를 변화시키면 k는 $S/S_m$가 커질수록 작아지는 경향이었다. 그러나, $kS/Sm$는 $S/S_m=1-4$ 또는 $\theta=15-90^{\circ}$의 범위에서는 거의 일정하였고, $S/S_m>4$ 또는 $\theta<15^{\circ}$ 직선적으로 증가하였다. 3) 본 실험에서 얻은 결과를 전보에서 구한 그물 저항식에 의해 해석하면, 자루그물에 있어 그물코의 면적에 대한 발의 체적의 비 $\lambda$ 즉 $$\lambda={\frac{\pi d^2}{21\;sin\;2\varphi}$$를 대표치수로 하는 레이놀즈수를 $R_e$라 하고($2\varphi$: 그물코의 전개각), 흐름에 수직인 평면에 대한 그물의 총 투영면적을 $S_n$이라 할 때, $R_e<100$의 영역에서는 $$k=160R_e\;^{-01}(\frac{S_n}{S_m})^{1.2}\;(\frac{S_m}{S})^{1.6}$$으로 주어졌고 $R_e\geq100$ 영역에서는 $$k=100(\frac{S_n}{S_m})^{1.2}\;(\frac{S_m}{S})^{1.6}$$으로 주어졌다. 이러한 결과는 전보에서 구한 k와 일치하는 것이므로, 전보에서 구한 k는 자루그물에 대한 책험의 결과와 잘 일치한다는 것을 알 수 있었다.

• 대한한의학방제학회지
• /
• 제11권2호
• /
• pp.213-232
• /
• 2003

Objectives : This study was designed to establish a characteristic discrimination of internal and external morphological standard of original plants and herbal states in Arisaema amurense var. serratum $N_{AKAI}$ and A. amurense $M_{AXIM}.$. Methods : In this studies, the external-internal morphological standards were determined by using stereoscope and butanol series. Results : 1. In the external shape of original plant, Arisaema amurense var. serratum $N_{AKAI}$ has high stem, an oval-elliptic leaflet and a serrate leaf margin. But A. amurense $M_{AXIM}$ has a relatively low stem, an upside oval leaflet and no serrate leaf margin. 2. On the herbs character of original plant, Arisaema amurense var. serratum $N_{AKAI}$ is small in height and diameter, but A. amurense $M_{AXIM}$ is relatively large in height and diameter. 3. On the gathered herbs character of original plant, the section of Arisaema amurense var. serratum $N_{AKAI}$ is brightly white, easily spilt and strong scent. But the section of A. amurense $M_{AXIM}$ is thin yellowish brown, not easily spilt and weak scent. Also the grade of gathered herbs, both can be classified by diameter and external scent. 4. In the current herbs character, Korean and Sichuan Province products are irregullar shape and have no scent, Jilin Province products are regular shape. Also, Guangxi Province products are small size and concave in one side, Hebei Province products are irregular size and shape. 5. In internal shape of original plant, epidermal cell of Arisaema amurense var. serratum is very tight. With the except of micro difference in parenchyma cell of cortex, on the whole there are nearly no differences with A. amurense $M_{AXIM}.$ Also, samely in the internal shape, according to collecting sites, epidermis exhibits a lot layer in curving state and secreting duct is developed and vascular bundle and exists between parenchyma cell of cortex. Conclusion : In the future, additional study is needed to distinguish herb and effect between same genus-degree of relatedness.

• Journal of applied mathematics & informatics
• /
• 제17권1_2_3호
• /
• pp.73-91
• /
• 2005

The application of Green's function in calculation of flow characteristics around submerged and floating bodies due to a regular wave is presented. It is assumed that the fluid is homogeneous, inviscid and incompressible, the flow is irrotational and all body motions are small. Two methods based on the boundary integral equation method (BIEM) are applied to solve associated problems. The first is a low order panel method with triangular flat patches and uniform distribution of velocity potential on each panel. The second method is a high order panel method in which the kernels of the integral equations are modified to make it nonsingular and amenable to solution by the Gaussian quadrature formula. The calculations are performed on a submerged sphere and some floating spheroids of different aspect ratios. The excellent level of agreement with the analytical solutions shows that the second method is more accurate and reliable.