• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
• /
• pp.143-151
• /
• 2000

Dissolved silica is make some critical trouble at steam turbine. And, we must measure it to ppb level. We were looking for the best measuring method of the silica. Via this study, we could found it in the N-IR spectroscopy technology. This dissertation have been discuss about system structure, system fundamentals and performance test. At the test, we were study in the spectral interference of $NH_3$. We know that existing system had some problem. It is structural frailties of single beam type. Therefore we were study for double beam type structure. And we obtain a good result. In the result, it have been discuss that conduct a test of $NH_3$ effect.

• 대한화학회지
• /
• 제30권2호
• /
• pp.201-206
• /
• 1986

새로운 분석시약 N-benzylisonitrosoacetylacetone imine (H-IAA-N-Bz)을 합성하여 원소분석, 적외선흡수스펙트럼, 핵자기공명흡수스펙트럼, 질량스펙트럼 등으로 그 구조를 확인하였다. H-IAA-N-Bz은 알카리 용액(pH = 7.0∼10.0)에서 구리착물을 형성하며, 클로로포름 유기용매층으로 잘 추출된다. 이 구리착물에 대한 분광광도법적 연구의 여러가지의 최적조건은 420nm의 파장에서 구하였으며, 클로로포름 10ml당 구리 $\mu$g이하의 농도 범위에서 Beer법칙이 잘 성립되었다. 구리 착물의 조성은 $Cu(IAA-N-Bz)_2$이며, 착물의 총괄 안정도상수는 $8.55{\times}10^6$이며, 몰흡광계수 $\varepsilon$은 3500l/$cm{\cdot}mol$이다.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3173-3179
• /
• 2010

New complex $[Mn(II)H_{1.5}L]_2[Mn(II)H_3L]_2(ClO_4)_5{\cdot}3H_2O$ (1), where $H_3L$ is tris {2-(4-imidazolyl)methyliminoethyl} amine (imtren), has been prepared by reacting manganese(II) perchlorate hexahydrate with the imtren ligand in methanol. X-ray crystallographic study revealed that the imtren ligand hexadentately binds to Mn(II) ion through the three Schiff-base imine N atoms and three imidazole N atoms with a distorted octahedral geometry, and the apical tertiary amine N atom of the ligand pseudo-coordinates to Mn(II), forming overall a pseudo-seven coordination environment. The hydrogen-bonds between imidazole and imidazolate of $[Mn(II)H_{1.5}L]^{0.5+}$ complex ions are extended to build a 2D puckered network with trigonal voids. $[Mn(II)H_3L]^{2+}$ complex ions constitutes another extended 2D puckered layer without hydrogen bonds. Two layers are wedged each other to constitute overall stack of the crystal. Peroxidase activity of complex 1 was examined by observing the oxidation of 2,2'-azinobis(3-ethylbenzothiazoline)-6-sulfonic acid (ABTS) with hydrogen peroxide in the presence of complex 1. Generation of $ABTS^{+{\cdot}}$ was observed by UV-vis and EPR spectroscopies, indicating that the complex 1, a fully-coordinated mononuclear Mn(II) complex with nitrogen-only ligand, has a heme-independent peroxidase activity.

• 생약학회지
• /
• 제3권2호
• /
• pp.65-72
• /
• 1972

Tissues of $Panax\;Schinseng\;N_{EES}\;root$ were cultured on the synthetic agar media to investigate the nutrient efficiency on the callus induction and organ formation. The differentiation pattern of the callus mass and the structure of the induced organ (root) were observed internally. On White's medium, callus formation needed the supplement of 2,4-D (5mg/l) and kinetin (1.0mg/l), and on MS medium the root induction NAA (0.2mg/l) and kinetin (0.1mg/l). In order to investigate the effect of inorganic components on callus formation, the inorganic part of White' medium was substituted with those of Heller, Murashige Skoog, and Earle. As the result culture Earle's was most effective. On the other hand, the roots were induced from the meristem in the deep region of callus mass. Since this meristem is similar to the pericambium of tap root, they are the same on the pattern of morphogenesis.

• 한국응용과학기술학회지
• /
• 제9권2호
• /
• pp.157-163
• /
• 1992

A microorganism, isolated from soil and designated Pseudomonas sp13, produced two kinds of rhamnolipid in the medium containing glucose as carbon source. There were both rhamnolipid contain L-rhamnose and ${\beta}$-hydroxydecanoic acid. Coumpound A and B elucted chloroform-methanol mixed solution of silicic acid column chromatography and recrystallized from a mixture of ether and n-hexane. Studies on the structure of these products reveled that compound A is L-rhamnopyranosyl-${\beta}$-hydroxydecanoyl-${\beta}$-hydroxydecanoic acid and compound B is L-rhamnopyranosyl-L-rhamnopyranosyl-${\beta}$-hydroxydecanoyl-${\beta}$-hydroxydecanoic acid.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.664-667
• /
• 2001

A flat-type L$_1$-B$_{8}$ Mode Ultrasonic motor(USM) uses longitudinal-bending multi-mode vibrator which is constructed with the metal-piezoceramic composite thin plate vibrator. Especially, the characteristics of vibrating displacement of the vibrator are important for the fabrication of USM. So, in this study, we tried to analyze them by the FEM(finite element method) simulation program. ANSYS 5.6 we used is a finite element software enabling the analysis of 2 or 3 dimensional structure of piezoelectric materials. Using this made us analyzing the resonance frequency and calculating displacement of vibrator and then the position of the projection.n.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.764-768
• /
• 2002

Characteristics of ohmic Co/Si/Co contacts to n-type 4H-SiC are investigated systematically. The ohmic contacts were formed by annealing Co/Si/Co sputtered sequentially. The annealings were performed at $800^{\circ}C$ using RTP in vacuum ambient and $Ar:H_2$(9:1) ambient, respectively. The specific contact resistivity$(\rho_c)$, sheet resistance$(R_s)$, contact resistance$(R_c)$, transfer length$(L_T)$ were calculated from resistance$(R_T)$ versus contact spacing(d) measurements obtained from TLM(transmission line method) structure. While the resulting measurement values of sample annealed at vacuum ambient were $\rho_c=1.0{\tiimes}10^{-5}{\Omega}cm^2$, $R_c=20{\Omega}$ and $L_T$ = 6.0 those of sample annealed at $Ar:H_2$(9:1) ambient were $\rho_c=4.0{\tiimes}10^{-6}{\Omega}cm^2$, $R_c=4.0{\Omega}$ and $L_T$ = 2.0. The physical properties of contacts were examined using XRD and AES. The results showed that cobalt silicide was formed on SiC and Co was migrated into SiC.

• 생명과학회지
• /
• 제32권9호
• /
• pp.729-733
• /
• 2022

수용성 단백질이 비정상적인 불용성 응집(aggregate)으로 전환되면 질환 등 여러 문제를 야기된다. 대장균 트립토판 중합효소 α 소단위체(αTS)는 가장 흔한 구조의 하나인 TIM 배럴 구조를 가지고 있다. 이전의 연구에서 불용성 응집이 일어나는 여러 잔기치환체(Y4C, S33L, P28L, P28S, G44S, D46N, P96L, P96S)를 얻었다. 본 연구에서는 높은 안정성과 도메인 협동성 성질을 보여주는 Y173F가 다른 잔기자리에 치환으로 유도된 응집 형성을 억제할 수 있는 지 여부를 조사했다. 8개 모두에서 억제효과를 보여 주었다. 단백질 분리가 가능한 P28L αTS를 분석한 결과, 이차구조함량의 감소, 안정성 감소, 소수성표면 증가 등의 구조변화특성을 보여주었다. Y173F가 첨가된 P28L/Y173F αTS은 야생형과 비슷한 구조로 회복되었다. 본 연구는 소수성 코아에 위치하는 Tyr¹⁷³ 잔기처럼 응집을 유도하는 여러 다른 잔기 자리를 보편적으로 억제하는 잔기가 존재할 수 있음을 시사해 준다.

• Journal of Welding and Joining
• /
• 제12권4호
• /
• pp.85-101
• /
• 1994

Effect of Cr, Cu and Ni metal powders addition on the alloyed layer of aluminum alloy (AC2B) has been investigated with the plasma transferred arc (PTA) overlaying process. The overlaying conditions were 125-200A in plasma arc current, 150mm/min in process speed and 5-20g/min in powder feeding rate. Main results obtained are summarized as follows: 1) It was made clear that formation of thick surface alloyed layer on aluminum alloy is possible by PTA overlaying process. 2) The range of optimum alloying conditions were much wider in case of Cu and Ni powder additions than the case of Cr powder addition judging from the surface appearance and the bead macrostructure. 3) Alloyed layer with Cu showed almost the homogeneous microstructure through the whole layer by eutectic reaction. alloyed layers with Cr and Ni showed needle-like and agglomerated microstructures, the structure of which has compound layer in upper zone of bead by peritectic and eutectic-peritectic reactions, respectively. 4) Microconstituents of the alloyed layer were analyzed as A1+CrA $l_{7}$ eutectics, C $r_{2}$al sub 11/, CrA $l_{4}$, C $r_{4}$A $l_{9}$ and C $r_{5}$A $l_{*}$ 8/ for Cr addition, Al+CuA $l_{2}$(.theta.) eutectics and .theta. for Cu addition, and Al+NiA $l_{3}$ eutectics. NiA $l_{3}$, N $i_{2}$A $l_{3}$ and NiAl for Ni addition. 5) Concerning defect of the alloyed layer, many blow holes were seen in Cr and Ni additions although there was lesser in Cu addition. Residual gas contents in blow hole for Cu and Ni alloyed layer were confirmed as mainly $H_{2}$ and a littie of $N_{2}$ Cracking was observed in compound zone of the alloyed layer in case of Cr and Ni addition but not in Cu alloyed layer.r.r.

• 한국결정학회지
• /
• 제9권1호
• /
• pp.1-5
• /
• 1998

[Cu(L)]I2, 2H2o(1) (L:3,14-Dimethyl-2,6,13,17-tetrazatricyclo[14,4,01.18, 07.12] docosane) 착물을 합성하고 구조를 규명하였다. 이 착물은 삼사정계, 공간군 P1, a=8.400(1)Å, b=8.986(3) Å, c=9.156(1) Å, α=82.42(1)˚, β=73.61(1)˚ λ=81.04(2)˚, Z=1로 결정화되었으며, 최종 신뢰도 R값은 288K에서 1926개 회석반점에 대하여 0.042이었다. 이 착물의 결정구조는 평면 사각구조를 갖고 Cu-N의 평균 거리는 2.029(11)Å이었다. 이 착물의 육면 고리가 오면 고리는 RRSS 배역을 갖는 이차 NH와 함께 각각 의자 형태와 고우시 형태를 갖는다.