• Transactions on Electrical and Electronic Materials
• /
• 제7권1호
• /
• pp.12-15
• /
• 2006

We present the structural, magnetic, and electrical properties in the (Al,Mn)N films with various Mn concentrations grown by plasma-enhanced molecular beam epitaxy. X-ray diffraction analyses reveal that the (Al,Mn)N films have the wurtzite structure without secondary phases. All (Al,Mn)N films showed the ferromagnetic ordering. Particularly, ($Al_{1-x}Mn_{x}$)N film with x = 0.028 exhibited the highest magnetic moment per Mn atom at room temperature. Since all the films exhibit the insulating characteristics, the origin of ferromagnetism in (Al,Mn)N might be attributed to either indirect exchange interaction caused by virtual electron excitations from Mn acceptor level to the valence band within the samples or a percolation of bound magnetic polarons arisen from exchange interaction of localized carriers with magnetic impurities in a low carrier density regime.

• 한국자기학회지
• /
• 제4권4호
• /
• pp.347-354
• /
• 1994

밀링 및 화학적 처리에 의해 제조된 소재의 구조해석 및 자기적 특성은 X선회절, 투과 전자현미경, 쾨스바우어 분광 및 비탄성 중성자산란 등의 측정에 의해 조사되었다. 질화처리에 의해 제조된 ${\gamma}'-Fe_{4}N$분말의 기계적 밀링처리에 의해, 대부분의 fcc ${\gamma}'-Fe_{4}N$상은 밀링 초기단계에 bct ${\alpha}'-Fe(N)$상으로 변태를 하며, 이러한 변태는 응력유기 마르텐사이트 변태로 규정지을 수 있다. 밀링처리에 제조한 bct ${\alpha}'-Fe(N)$ 초미세 분말의 열처리에 의해 673~773 K의 온도범위에서 ${\alpha}'-Fe_{16}N_{2}$상이 부분적으로 생성되며, 이로 인해 포화자화값이 증가한다. Mn-45, 70, 85 at.% Al의 조성으로 혼합한 분말은 기계적 합금화에 의해, Al은 부분적으로 ${\alpha}-Mn$상에 고용된다. 이로 인해 ${\alpha}-Mn$형 Mn-Al합금의 자기적 성질은 상자성에서 강자성으로 특성이 변하며, 특히 밀링처리한 Mn-70 at.% Al 계에 있어서 포화자화값은 11 emu/g을 나타낸다. 한편, 밀링처리한 Mn-85 at.% Al계에서 화학적 추출법을 이용하는 것에 의해 skeleton-type의 순 ${\alpha}-Mn$분말상을 제조한 결과 포화자화값은 36 emu/g으로 급격히 증가하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제7권1호
• /
• pp.26-29
• /
• 2006

We present the structural, magnetic, and electrical properties in the (Al,Mn)N films with various Mn concentrations grown by plasma-enhanced molecular beam epitaxy. X-ray diffraction analyses reveal that the (Al,Mn)N films have the wurtzite structure without secondary phases. All (Al,Mn)N films showed the ferromagnetic ordering. Particularly, ($Al_{1-x}Mn_{x}$)N film with x = 0.028 exhibited the highest magnetic moment per Mn atom at room temperature. Since all the films exhibit the insulating characteristics, the origin of ferromagnetism in (Al,Mn)N might be attributed to either indirect exchange interaction caused by virtual electron excitations from Mn acceptor level to the valence band within the samples or a percolation of bound magnetic polarons arisen from exchange interaction of localized carriers with magnetic impurities in a low carrier density regime.

• 마이크로전자및패키징학회지
• /
• 제14권4호
• /
• pp.87-92
• /
• 2007

[ $CaAl_{12}O_{19}:Mn^{4+}$ ] 적색 형광체는 $Mn^{4+}$이온이 0.02 mol 첨가되었을 때 최대 발광 세기가 관찰되었고 $1600^{\circ}C$, 3시간 소성조건에서 우수한 결정성과 발광 효율을 나타내며 중심 파장이 658 nm에서 관찰되었다. 본 연구에서 개발된 $CaAl_{12}O_{19}:Mn^{4+}$ 형광체를 에폭시와 함께 1:3으로 혼합하여서 InGaN UV 발광체의 Bare 칩 위에 코팅하여 중심파장이 658 nm인 적색 LED를 제조하였다. 적색 형광체를 이용하여, 기존의 UV LED를 여기 광원으로 다양한 느낌의 백색 발광체를 설계 할 수 있을 것이다.

• Journal of the Korean Physical Society
• /
• 제73권11호
• /
• pp.1703-1707
• /
• 2018

Ferromagnetic ${\tau}-phase$ $Mn_{54}Al_{46}C_{2.44}$ particles were synthesized, and its composites with commercial $Sm_2Fe_{17}N_3$ and synthesized $Fe_{65}Co_{35}$ powders were fabricated. Smaller grain size than the single domain size of the $Mn_{54}Al_{46}C_{2.44}$ without obvious grain boundaries and secondary phases is the origin for the low intrinsic coercivity. It was confirmed that the magnetic properties of the $Mn_{54}Al_{46}C_{2.44}$ can be enhanced by magnetic exchange coupling with the hard magnetic $Sm_2Fe_{17}N_3$ and soft magnetic $Fe_{65}Co_{35}$. The high degrees of the exchange coupling were verified by calculating first derivative curves. Thermo-magnetic stabilities of the composites from 100 to 400 K were measured and compared. It was demonstrated that the $Mn_{54}Al_{46}C_{2.44}$ based composites containing $Sm_2Fe_{17}N_3$ and $Fe_{65}Co_{35}$ could be promising candidates for future permanent magnetic materials with the proper control of purity, magnetic properties, etc.

• Corrosion Science and Technology
• /
• 제9권2호
• /
• pp.81-86
• /
• 2010

The mechanisms of selective oxidation of intercritically annealed CMnAl TRIP steels in a Continuous Galvanizing Line (GCL) were studied by cross-sectional observation of the surface and sub-surface regions by means of High Resolution Transmission Electron Microscopy (HR-TEM). The selective oxidation and nitriding of an intercritically annealed CMnAl TRIP steel in a controlled dew point 10%$H_2+N_2$ atmosphere resulted in the formation of c-xMnO.$MnO_2$ (1${\leq}$x<3) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) particles on the steel surface. Single crystal c-xMnO.$SiO_2$ ($2{\leq}x{\leq}4$) oxide particles were also observed on the surface. A thin film of crystalline c-xMnO.$SiO_2$ (2${\leq}$x<3) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) was present between these particles. In the sub-surface region, internal oxidation, nitriding and intermetallic compound formation were observed. In the first region, large crystalline c-xMnO.$SiO_2$ ($1{\geq}x{\geq}2$) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) oxides particles were present. In the second region, c-AlN particles were observed, and in a third region, small $MnAl_x$ (x>1) intermetallic compound particles were observed.

• 한국세라믹학회지
• /
• 제26권4호
• /
• pp.453-458
• /
• 1989

Aluminum nitride powder prepared from the hydroxides, AlOOH and Al(OH)3 which were obtained by hydrolysis of Al-isopropoxide, was densified at 1750 and 180$0^{\circ}C$ for 60 min by hot-pressing under the pressure of 25kg/$\textrm{cm}^2$. Theoretical density could be obtained at 175$0^{\circ}C$. Their flexural strengths were 450MPa and 395MPa for the specimens obtained from Al(OH)3 and AlOOH, respectively. There was no remarkable change in flexural strength up to 100$0^{\circ}C$. Fracture toughness values were 3.50MN/m3/2 for Al(OH)3 and 3.11MN/m3/2 for AlOOH. It is assumed that these differences in mechanical properties are due to the abnormal grain growth for the AlN ceramics obtained from AlOOH.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.3005-3012
• /
• 2013

The effect of Mn-promotion on high surface area Al-pillared montmorillonite (AlMMT) supported Co nanoparticles prepared by hydrothermal method have been investigated. A series of different weight% Mn-promoted Co nanoparticles were prepared and characterized by XRD, TPR, TGA, BET and SEM techniques. An increase in the surface area of MMT is observed with Al-pillaring. Fischer-Tropsch catalytic activity of the as prepared catalysts was studied in a fixed bed micro reactor at $225^{\circ}C$, $H_2/CO$ = 2 and at 1 atm pressure. The data showed that by the addition of Mn the selectivity of $C_1$ dropped drastically while that of $C_2-C_{12}$ hydrocarbons increased significantly over all the Mn-promoted Co/AlMMT catalysts. The $C_{13}-C_{20}$ hydrocarbons remained almost same for all the catalysts while the selectivity of $C_{21+}$ long chain hydrocarbons decreased considerably with the addition of Mn. The catalyst with 3.5%Mn showed lowest $C_{21+}$ and highest $C_2-C_{12}$ hydrocarbons selectivity due to cracking of long chain hydrocarbons over acidic sites of MMT.

• 열처리공학회지
• /
• 제13권3호
• /
• pp.158-162
• /
• 2000

The high temperature oxidation behavior and the surface defect in Fe-25Mn-1.5A1-0.5C steel was investigated by XRD (X-ray Diffractin) and electron microscopy. The intra- and inter-granular oxides were formed by the selective oxidation of manganese and aluminum, which were identified to MnAl2O4 phase. Aluminum nitride (AlN) was formed in front of these oxides. The ${\gamma}$-matrix was transformed to ${\alpha}$- and ${\varepsilon}$- phases by the selective oxidation of manganese. The surface defect, micro-scab was induced by the difference of the high temperature ductility between the matrix and the inter-granular oxide.

• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.633-638
• /
• 2011

Mn이 치환된 헥사알루미네이트 촉매인 $LaMnAl_{11}O_{19}$, $BaMnAl_{11}O_{19}$, $SrMnAl_{11}O_{19}$을 $(NH_4)_2CO_3$ 공침법을 이용하여, $1,200^{\circ}C$ 5시간 소성을 통해 제조하였다. X-선 회절, 질소흡착을 통해 촉매의 결정구조와 비표면적을 분석한 결과, 결정 격자 내 거울면에 La이 존재하는 $LaMnAl_{11}O_{19}$이 $BaMnAl_{11}O_{19}$과 $SrMnAl_{11}O_{19}$보다 우수한 헥사알루미네이트 결정 구조를 가지는 동시에 13 $m^2/g$의 높은 비표면적을 가지고 있었다. 또한 SEM 분석을 통해 $LaMnAl_{11}O_{19}$이 특유의 판상구조가 잘 발달함을 확인하였다. 메탄 연소 활성은 다음과 같은 차례로 증가하였고: $LaMnAl_{11}O_{19}$ > $SrMnAl_{11}O_{19}$ > $BaMnAl_{11}O_{19}$. 메탄 연소 활성은 비표면적에 의존하였다. $LaMnAl_{11}O_{19}$에 60 wt%의 $CeO_2$를 첨가하고 $700^{\circ}C$의 저온에서 소성한 경우 $700^{\circ}C$의 저온에서 100% 전환율에 도달함으로써 ceria 첨가에 의한 메탄 연소 개선 효과를 확인할 수 있었으며, 이 촉매가 저온 및 중온 영역의 메탄 연소 촉매로 활용될 수 있음을 확인하였다. 그러나, 이 촉매의 경우 $1,200^{\circ}C$의 고온에서 5시간 소성한 후에는 ceria입자 크기의 증가로 인해 메탄의 연소 활성 개선 효과를 잃게됨으로 고온용 연소 촉매로서의 사용은 한계가 있음을 확인하였다.