• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.77-80
• /
• 2006

Structural phase transformations of silicon during nanoindentation were investigated in detail at the atomic level. The molecular dynamics simulations of nanoindentation on the (100), (110) and (111) surface of single crystalline silicon were simulated, and this supported the theoretical prediction of the anisotropic behavior of structural phase transformations. Simulations showed that microscopic aspects of phase transformation varied according to the crystallographic orientation of the contact surface and were directly linked to the slip system.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.107-110
• /
• 1999

본 연구에서는 진공압추출법에 의해 제조되는 알루미나(AI$_2$O$_3$) 단섬유예비성형체의 제조공정시 발생하는 섬유들의 배향분포의 특징을 2차원 수치모사를 통해 밝혔다. 수치해석은 섬유의 배향분포를 2차원으로 가정한 후 제조공정시 섬유들이 적층되는 현상을 섬유의 낙하, 회전, 미끄러짐, 이동의 단계의 나누어 모델링하였다. 해석결과 섬유의 배향과 부피분율은 섬유의 종횡비(길이/지름)에 의해 크게 영향을 받으며, 배향 분포는 정규분포와 유사한 것으로 밝혀졌다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.3
• /
• pp.110-117
• /
• 1998

A continuum-based configuration design sensitivity analysis method is developed for kinematically driven mechanical systems. The configuration design variable for mechanical systems is defined. The 3-1-3 Euler angle is employed as the orientation design variable. Kinematic admissibility conditions of configuration design change. Direct differentiation method is used to derive the governing equations of the design sensitivity. Numerical examples are presented to demonstrate the validity and effectiveness of the proposed method.

• 한국정보컨버전스학회:학술대회논문집
• /
• 2008.06a
• /
• pp.103-110
• /
• 2008

In this thesis, we describe a statistical method for 3D object detection. In this method, we decompose the 3D geometry of each object into a small number of viewpoints. For each viewpoint, we construct a decision rule that determines if the object is present at that specific orientation. Each decision rule uses the statistics of both object appearance and "non-object" visual appearance. We represent each set of statistics using a product of histograms. Each histogram represents the joint statistics of a subset of wavelet coefficients and their position on the object. Our approach is to use many such histograms representing a wide variety of visual attributes. Using this method, we have developed the first algorithm that can reliably detect faces that vary from frontal view to full profile view and the first algorithm that can reliably detect cars over a wide range of viewpoints.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.505-508
• /
• 1987

The structure of vacuum evaporated PbO films is investigated. Also, the Photosensitivity and dark resistivity are measured. The dominant structure and orientation of these films were red (tetragonal) form, and <110> and <101> direction under- the suitable deposition conditions. And the crystallite size of them was about $2um{\times}0.2um$. These PbO films have good photosensitivity(r=0.9) and high dark resistivity. (${\rho}=10^{14}{\Omega}{\cdot}cm$)

• Electrical & Electronic Materials
• /
• v.10 no.7
• /
• pp.668-673
• /
• 1997

A Single-crystalline Mn-Zn Ferrite (110 orientation) was masklessly etched by focused Ar laser irradiation in an H$_3$PO$_4$ solution. The depth of the etched grooves increases with increasing a laser power, decreasing a scan speed, and increasing the H$_3$PO$_4$concentration. The width of the etched grooves increases with a increasing laser power, but was relatively insensitive to the scan speed and H$_3$PO$_4$concentration. High etching rate of up to 714 ${\mu}{\textrm}{m}$/s and an aspect ratio of 6 for vertical slab structure have been obtained by the light-guiding effect of the laser bean in the H$_3$PO$_4$ solution.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.106-110
• /
• 2002

4S-Van is being developed in order to provide the spatial data rapidly and accurately. 4S-Van technique is a system for spatial data construction that is heart of 4S technique. Architecture of 4S-Van system consists of hardware integration part and post-processing part. Hardware part has GPS, INS, color CCD, camera, B/W CCD camera, infrared rays camera, and laser. Software part has GPS/INS integration algorithm, coordinate conversion, lens correction, camera orientation correction, and three dimension position production. In this paper, we suggest that adequate 4S-Van design is needed according to application environment from various test results.

• Journal of Korean Society for Quality Management
• /
• v.27 no.1
• /
• pp.101-110
• /
• 1999

Products are often evaluated on rating scales to measure and quantify their attributes of interest. In case that one wishes to compare multiple rating datasets simultaneously, there must be a standardized scale with which one can discriminate relative differences among corresponding scale means. In this regard, the concept of Thurstonian modeling applied to various discrimination tests including the triangular method has been recently being reconsidered. In this paper we extend previous researches on the triangular method and evaluate the effect of unequal variances and correlated variables upon the probability of correct response using Monte-Carlo simulation. We observed that the probability of correct response depends on dimensionality, variances, and correlation structure of stimulus sets. But it does not depend on the relative orientation in a multidimensional space.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.3
• /
• pp.195-202
• /
• 1996

The composition, the microstructure and the magnetic properties(HC and Hk) of Fe-Co-Ni alloy electrodeposits were investigated according to the electrolysis conditions using sulfate bath paddle agitated. The current efficiency of the alloys electrodeposition was considerably low in the range of 16∼50%. The Fe content(wt.%) of the alloy increased from 20% to 57% with current density, while Ni content of them decreased in the range of 70∼24% respectively, and Co content was nearly constant. As a result, Fe/Ni ratio of the alloy increased from 0.3 to 2.0 showing the anomalous codeposition. The structure of the alloy changed from fcc to the mixed one of fcc+bcc with the increase of Fe/Ni ratio. The preferred orientation of the alloy with fcc and bcc structure were (220) and (110) respectively. The alloy with Fe/Ni ratio(0.3∼l.2) had the lowest coercivity of 0.4∼0.8 Oe.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.469-474
• /
• 1996

Alloy 690은 응력부식 균열에 대한 저항성이 요구되는 원자력 발전소 증기발생기 전열관 재료에 사용되고 있다$^{(1)}$ . 응력부식 균열에 대한 저항성은 주로 결정입계에 존재하는 크롬탄화물의 기여에 의한 것이 대부분이다. 크롬탄화 석출물의 핵생성을 알아보기 위해서 110$0^{\circ}C$에서 용체화처리를 0, 1, 3, 10분 동안 하여 관찰하였다. 용체화처리한 모든 시편에서 결정입계에 존재하는 석출물의 분포는 쌍정과 교차하면서 갑자기 변화하는 것을 관찰 할 수 있다. 이처럼 석출물이 존재하지 않는 결정입계들은 대부분 낮은 ∑ 값의 CLS으로부터 약간 벗어난 입계가 될 것이다. 결정입계에 존재하는 석출물은 기지와 Cube-Cube orientation relationship을 갖는다. 그리고 단지 하나의 결정입과 반정합을 이룬다. 기지와 반정합을 이루는 석출물은 M$_{23}$ C$_{6}$형태의 크롬 탄화물이고 격자상수는 기지의 격자상수보다 3배 크다.