• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.182-182
• /
• 2014

Multiferroic materials have attracted much attention due to their own fascinating fundamental physical properties and potential technological applications to magnetic/ferroelectric data storage systems, quantum electromagnets, spintronics, and sensor devices. Among single-phase multiferroic materials, $BiFeO_3$, in particular, has received considerable attention because the enhanced ferromagnetism was found by the Fe-site ion substitution with magnetic ions. The structural, the magnetic and the ferroelectric properties of polycrystalline $BiFe_{1-x}Ni_xO_3$ (x=0, 0.01, 0.02, 0.03 and 0.05), which were prepared by the solid-state reaction and the rapid-sintering method, have been investigated. The x-ray diffraction patterns reveal that all the samples are in single phase and show rhombohedral structure with R3c space group. The magnetic properties are enhanced according to the doping content. The Ni-doped $BiFeO_3$ samples exhibit lossy P-E loop due to the oxygen vacancy. The leakage current density of Ni-doped samples (x=0.01 and 0.02) is increased by four orders of magnitude. On the other hand, the x=0.03 and 0.05 samples show the relative reduction of the leakage current.

• 한국세라믹학회지
• /
• 제40권1호
• /
• pp.31-36
• /
• 2003

본 연구에서는 칩 인덕터용 코어 소재로 사용되는 NiCuZn-ferrite를 공침법을 이용하여 나노크기의 초미세 분말로 합성하고, 합성된 NiCuZn-ferrite의 하소 온도에 따른 저온소결 특성 및 전자기적 특성에 관하여 고찰하였다. 조성은 (N $i_{0.4-X}$C $u_{x}$Z $n_{0.6}$)$_{1+w}$(F $e_2$ $O_4$)$_{1-w}$에서 x 값을 0.2, w 값은 0.03으로 고정하였고, 하소는 30$0^{\circ}C$에서 7$50^{\circ}C$의 온도범위에서 진행하였다. 하소 후 90$0^{\circ}C$에서 소결한 시편의 특성을 측정한 결과, 공침법으로 합성한 NiCuZn-ferrite는 90$0^{\circ}C$의 저온에서 소결밀도 4.90g/㎤, 초기투자율 164, Q-factor 72임을 확인하였다. 또한, NiCuZn-ferrite의 미세구조는 하소온도가 증가함에 따라 입자가 커지고 불균일한 상태가 되며, 초기투자율 등의 ferrites의 전자기적 특성이 저하되었다.되었다.

• 한국식품과학회지
• /
• 제36권5호
• /
• pp.717-722
• /
• 2004

Lipozyme RM IM 효소적 촉매를 사용한 glycerolysis에 의한 옥수수유로부터 $1,3-DAG(Y_1),\;1,2-DAG(Y_2)$, 총 $DAG(Y_3),\;MAG (Y_4)$, 및 총 DAG + MAG 의 합성 양$(Y_5)$의 생성 최적화를 반응 표면분석을 이용하여 모니터링 하였으며 반응온도$(35-75^{\circ}C,\;X_1)$, 반응시간$(1-11시간,\;X_2)$ 및 hexane 의 혼합 양$(0-2mL,\;X_3)$을 변수로 한 중심합성계획으로 최적화 실험하였다. 1,3-DAG는 반응온도$(44.92^{\circ}C)$, 반응시간(10.24시간) 및 hexane 첨가량(1.16mL) 조건에서 20.43 area%로 최대값을 나타내었으며 1,2-DAG는 $56.32^{\circ}C$, 6.95시간 및 1.04mL 조건에서 26.78 area% 로 최대값을 예측할 수 있었다. 총 DAC는 $53.82^{\circ}C$, 8.03시간 및 1.08mL 실험 조건에서 45.09 area% 최대값을 보였다. 또한 MAG 생산 최적조건은 $64.14^{\circ}C$, 7.00시간 및 0.13mL에서 최대값 9.57 area%로 예측되었으며 총 DAG+MAG 생산 최적조건은 $54.07^{\circ}C$, 7.98시간, 1.02mL이었으며 이때 예측된 값은 53.54 area%이었다.

• 한국자기학회지
• /
• 제15권2호
• /
• pp.92-95
• /
• 2005

희박자성반도체 물질인 ZnO 산화물 반도체에 $^{57}Fe$를 미량 치환한 $Zn_{1-x}\;^{57}Fe_xO(X=0.01, 0.02, 0.03)$ 물질을 전통적인 고상반응법에 의하여 물질을 합성하였다. 이렇게 합성된 희박자성반도체 물질의 결정학적 및 자기적 특성을 x-선 회절(XRD), 진동시료 자화 측정 (VSM), $M\ddot{o}ssbauer$분광 실험을 통하여 연구하였다. $ZnFe_2O_4$의 스피넬 페라이트에 해당하는 이차상 생성을 진공열처리를 통하여 제거하였으며, 결정구조는 격자상수 ${\alpha}_o=3.252{\AA},\;c_o=5.205{\AA}$를 갖는 단일상의 wurzite hexagonal 구조로 결정하였다. 77 K에서의 VSM 측정결과 상자성상과 강자성상이 공존하는 결과를 확인할 수 있었으며, Fe의 치환량이 증가할수록 강자성상이 증가하는 것을 알 수 있었다. 뫼스바우어 측정 결과 4.2 K에서 강자성상에 해당하는 공명흡수선이 존재하였으며, 상온에서는 상자성에 해당하는 2개의 공명흡수선만이 존재하는 것을 알 수 있었다. 이러한 결과는 VSM 결과와 잘 일치하였다.

• 한국재료학회지
• /
• 제20권3호
• /
• pp.137-141
• /
• 2010

The $(1-x)La_{0.7}Sr_{0.3}MnO_3(LSMO)/xZnFe_2O_4$(ZFO) (x = 0, 0.01, 0.03, 0.06 and 0.09) composites were prepared by a conventional solid-state reaction method. We investigated the structural properties, magnetic properties and electrical transport properties of (1-x)LSMO/xZFO composites using X-ray diffraction (XRD), scanning electron microscopy (SEM), field-cooled dc magnetization and magnetoresistance (MR) measurements. The XRD and SEM results indicate that LSMO and ZFO coexist in the composites and the ZFO mostly segregates at the grain boundaries of LSMO, which agreed well with the results of the magnetic measurements. The resistivity of the samples increased by the increase of the ZFO doping level. A clear metal-to-insulator (M-I) transition was observed at 360K in pure LSMO. The introduction of ZFO further downshifted the transition temperature (350K-160K) while the transition disappeared in the sample (x = 0.09) and it presented insulating/semiconducting behavior in the measured temperature range (100K to 400K). The MR was measured in the presence of the 10kOe field. Compared with pure LSMO, the enhancement of low-field magnetoresistance (LFMR) was observed in the composites. It was clearly observed that the magnetoresistance effect of x = 0.03 was enhanced at room temperature range. These phenomena can be explained using the double-exchange (DE) mechanism, the grain boundary effect and the intrinsic transport properties together.

• 한국세라믹학회지
• /
• 제34권6호
• /
• pp.629-635
• /
• 1997

The effects of the annealing atmospheres(O2, N2) and sintering additives that Bi2O3 is a major composition on the microwave dielectric and sintering propertie of (1-x)CaTiO3-xLaAlO3 system were investigated. The annealing atmospheres and the increase of annealing time after sintering did not affect the relative dielectric constant($\varepsilon$r) and temperature coefficient of resonant frequency($\tau$f) of (1-x)CaTiO3-xLaAlO3 system. However, the Q.f0 values of (1-x)CaTiO3-xLaAlO3 were very sensitive to annealing atmospheres. As the annealing time increased under O2 atmosphere the Q.f0 values of (1-x)CaTiO3-xLaAlO3 enhanced untill 10 hrs in 0.3$\leq$x$\leq$0.6 region, but degraded over that time. The increasing rate of Q.f0 value increased wth increasing x. On the other hand, as the annealing time increased under N2 atmosphere the Q.f0 values were constant in x$\leq$0.6 region, increased gradually in x$\geq$0.7 region. When 0.97Bi2O3-0.03Al2O3 and 0.76Bi2O3-0.24NiO of 3wt% as sintering additives were added to (Ca0.5La0.5) (Ti0.5Al0.5)O3 (x=0.5) the sintering temperature of 1$600^{\circ}C$ was lowered to 140$0^{\circ}C$, and the relative dielectric constant($\varepsilon$r) and temperature coefficient of resonant frequency($\tau$f) were not nearly changed. The addition of 0.97Bi2O3-0.03Al2O3 and 0.76Bi2O3-0.24NiO of 3wt% to (Ca0.5La0.5)(Ti0.5Al0.5)O3 made the Q.f0 values to be lower about 15% and 34%, respectively.

• Applied Science and Convergence Technology
• /
• 제26권4호
• /
• pp.70-73
• /
• 2017

The dielectric constant and loss of poling/non-poling was measured in the $Pb_{1-3x/2}La_x[(Mg_{1/3}Ta_{2/3})_{0.66}Zr_{0.34}]O_3$ samples. The addition of $La^{3+}$ to the $Pb_{1-3x/2}La_x[(Mg_{1/3}Ta_{2/3})_{0.66}Zr_{0.34}]O_3$ did not cause a large change in grain size. But the addition of $La^{3+}$ did show transition temperature, which shifted toward low temperature in the $Pb[(Mg_{1/3}Ta_{2/3})Zr]O_3$ systems. In addition, the dielectric and pyroelectric properties (${\varepsilon}{\sim}20000$, $p{\sim}0.03C/m^2K$) of this system using $La^{3+}$ have been greatly improved. Pyroelectrics $Pb_{0.97}La_{0.02}(Mg_{1/3}Ta_{2/3})_{0.66}Zr_{0.34}]O_3$ system was found to have a relatively high ferroelectric FOMs ($F_V{\sim}0.035m^2/C$, $F_D{\sim}0.52{\times}10^{-4}Pa^{-1/2}$) at room temperature. Spontaneous polarization showed a value of $0.27{\sim}0.35C/m^2$ in the composition added to $La^{3+}$. The piezoelectric constant ($d_{33}=350{\sim}490pC/N$) and electromechanical coupling factor ($k_P=0.25{\sim}0.35$) are obtained in $Pb_{1-3x/2}La_x[(Mg_{1/3}Ta_{2/3})_{0.66}Zr_{0.34}]O_3$ compositions with $La^{3+}$ dopant.

• 한국자기학회지
• /
• 제8권3호
• /
• pp.156-160
• /
• 1998

고주파 마그네트론 스퍼링법에 의하여 두께 약 2000$\AA$으로 제조한 (Mn0.5-ZSb0.5+Z)100-yPty(0$0^{\circ}C$의 진공중에서 열처리한 후, X-선회질장치, 토크자려계, kerr 효과 즉정장치를 이용하여 결정구조 및 자기광학적 특성을 조사하였다. 열처리 후, MnSbPt 합금막은 FDD의 Clb-형구조를 갖으나, MnSbAg 합금막은 HCP의 NiAs-형구조를 갖고 c-축이 막면에 수직하여 배향하는 이방성조직이 형성되나 열처리시간이 길어지면 등방성조직으로 바뀐다. 30$0^{\circ}C$에서 3시간 동안 dufcjflgksMnSbAg 합금막에서 우수한 수직자기이방성이 관측되었으며 Mn47.4Sb47.5Ag5.1 합금막으로부터 K1=6.6$\times$105 erg/cm3, K2=1.9$\times$105 erg/cm3의 수직자기이방성값을 얻었다. 입사파장 700~100nm 범위에서 MnSbpt 합금막의 Kerr 회전각은 입사파장이 감소할수록 증가하나 MnSgAg 합금막은 반대경향을 보인다. 입사파장 λ=700nm에서 Mn41.1Sb44.9Pt14.0 및 Mn47.4Sb47.5Pt5.1 합금막의 Kerr 회전각 $\theta$k는 각각 1.7$^{\circ}$와 0.2$^{\circ}$이고 λ=1000nm에서는 각각 0.6$^{\circ}$와 0.97$^{\circ}$이다.

• 한국재료학회지
• /
• 제27권3호
• /
• pp.144-148
• /
• 2017

The effects of an excess of Bi on the piezoelectric and dielectric properties of $0.60Bi_{1+x}FeO_3-0.40BaTiO_3$ (x = 0, 0.01, 0.03, 0.05, 0.07) were investigated. The ceramics were processed through a conventional solid state reaction method and then quenched after sintering at different temperatures in the range of $980{\sim}1070^{\circ}C$. A single perovskite structure without any secondary phase was confirmed for all compositions and temperatures. It was found that excess Bi reduced the sintering temperatures, acted as a sintering aid and enhanced the properties in combination with quenching. Curie temperature ($T_C$) was found to slightly increase due to the presence of excess Bi; electrical properties were also improved by quenching. At x = 0.03 and $1030^{\circ}C$, remnant polarization ($2P_r$) was as high as $45.4{\mu}C/cm^2$ and strain at 40 kV/cm was up to 0.176 %.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권8호
• /
• pp.376-381
• /
• 2001

The(1-x) MgTiO$_3$-xSrTiO$_3$(x=0.03~0.04) ceramics were fabricated by the conventional mixed oxide method. The structural and microwave dielectric properties were investigated by XRD, SEM, EDS and network analyzer. The sintering temperature and time were 1275$^{\circ}C$~135$0^{\circ}C$ and 2hours, respectively. In the XRD results of 0.96MgTiO$_3$-0.04SrTiO$_3$ceramics, the perovskite structure of SrTiO$_3$and ilmenite structure of MgTiO$_3$phase were coexisted. The dielectric constant($\varepsilon$(sub)${\gamma}$) and temperature coefficient of resonant frequency($\tau$(sub)f) were increased with addition of SrTiO$_3$. In thie case of 0.96MgTiO$_3$-0.04SrTiO$_3$ ceramics sintered at 13$25^{\circ}C$, the dielectric constant, quality factor(Q) and temperature coefficient of resonant frequency($\tau$(sub)f) were 20.13, 7956(at 7.27GHz), and +1.76ppm/$^{\circ}C$, respectively.