• Journal of Astronomy and Space Sciences
• /
• 제26권4호
• /
• pp.421-424
• /
• 2009

The $JHK_S$ magnitudes of the red giant branch tip (TRGB) and the distance moduli of the nearby dwarf irregular galaxy IC 1613 have been determined from the near-infrared luminosity functions (LFs) of the resolved stars in the galaxy. Applying a Savitzky-Golay filtering, we derived the second derivatives of the LFs, and estimated the apparent magnitudes of the TRGB as $m_J\;=\;19.1$, $m_H\;=\;18.4$, and $m_{Ks}\;=\;18.0$. The mean values of the theoretical absolute magnitudes of the TRGB were measured by using the Yonsei-Yale isochrones with a metallicity range of -2.1 < [Fe/H] < -0.5 and age of 12 Gyr. The derived values of near-infrared TRGB distance moduli for IC 1613 are (m - M) = $24.12{\pm}0.25$, $24.20{\pm}0.44$, and $24.00{\pm}0.52$ for J, H, and $K_S$ bands, respectively.

• 한국초지조사료학회지
• /
• 제24권3호
• /
• pp.193-200
• /
• 2004

Orchardgrass 및 white clover에서 미량요소 Fe, Mn, Cu 및 Zn의 systematic variation 시비가 목초의 생육, 개화, 수량 및 양분 함량 등에 미치는 영향 등을 구명하였다. 다량요소 양분을 동일량 시비한 조건에서 시험군-1(Fe/Cu), 시험군-2(Mn/Zn), 시험군-3(Fe+Cu/Mn+Zn)의 처리내용은 시험군별 처리양분의 총 시비량($100\%$)을 systematic variation 방법으로 각각 0/100, 25/75, 50/50, 75/25, $100/0\%$ 비율로 나누어 시비처리 하였고, 시험군-4(Fe/Mn/Cu/Zn)에서는 각 기준양분 $70\%$, 기타 양분은 각각 $10\%$(합계 $100\%$) 비율로 시비처리 하였다. 1. 일반적으로 처리별 수량에 미치는 영향은 초종간 큰 차이를 보였으며 white clover는 orchardgrass 보다 더 크게 영향을 받았다. white clover의 처리별 수량변화는 뿌리/근류의 생육 및 개화특성 등과 연관성을 보였다(I보). 2. Fe/Cu 비율시험에서 orchardgrass의 수량은 $100/0\%$ 처리에서, white clover는 75/25 처리에서 다소 높은 수량을 보였다. 또한 white clover의 양호한 생육과 수량은 Cu 비율에 더 크게 영향을 받았고 orchardgrass는 Fe 비율에 더 영향을 받는 경향 이였다. 3. Mn/Zn 비율시험에서 두 초종 공히 높은 Mn 비율에서 양호한 수량을 보였다. 그러나 Mn-결핍조건에서는 white clover가 orchardgrass보다 상대적으로 더 수량감소를 보였다. 이에 비해서 Zn-함량의 변화와 이의 수량에 미치는 영향은 경미하였다. 4. Fe+Cu/Mn+Zn 비율시험에서 orchardgrass는 처리간 수량 차이가 경미하였다. white clover는 orchardgrass에 비해서 처리별 수량차이가 크게 나타났다. 75/25 처리에서 높은 수량을 보였으며 100/0 처리에서는 후반기에 심한 수량감소를 나타냈다. Fe/Mn/Cu/Zn 비율시험에서 white clover는 Cu와 Zn 처리에서 다소 양호한 수량을 보였고 이는 아마도 균형된 Fe/Mn 비율과도 연관된 것으로 보였다.

• 한국수소및신에너지학회논문집
• /
• 제24권1호
• /
• pp.29-35
• /
• 2013

A dense mixed ionic and electronic conducting ceramic membrane is one of the most promising materials because it can be used for separation of oxygen from the mixture gas. The $ABO_3$ perovskite structure shows high chemical stability at high temperatures under reduction and oxidation atmospheres. $BaCo_{1-x-y}Fe_xZr_yO_{3-{\delta}}$ (BCFZ) was well-known material as high mechanical strength, low thermal conductivity and stability in the high valence state. Glycine Nitrate Process (GNP) is rapid and effective method for powder synthesis using glycine as a fuel and show higher product crystallinity compared to solid state reaction and citrate-EDTA method. BCFZ was fabricated by modified glycine nitrate process. In order to control the burn-up reaction, $NH_4NO_3$ was used as extra nitrate. According to X-Ray Diffraction (XRD) results, BCFZ was single phase regardless of Zr dopants from y=0.1 to 0.3 on B sites. The green compacts were sintered at $1200^{\circ}C$ for 2 hours. Oxygen permeability, methane partial oxidation rate and hydrogen production ability of the membranes were characterized by using Micro Gas Chromatography (Micro GC) under various condition. The high oxygen permeation flux of BCFZ 1-451 was about $1ml{\cdot}cm^{-2}s^{-1}$. Using the humidified Argon gas, BCFZ 1-433 produced hydrogen about $1ml{\cdot}cm^{-2}s^{-1}$.

• 한국초지조사료학회지
• /
• 제24권1호
• /
• pp.11-20
• /
• 2004

Orchardgrass 및 white clover의 단파 및 혼파 재배조건에서 미량요소 Fe, Mn, Cu, Zn, Mo및 B의 조합시비가 목초의 생육, 개화, 수량, 양분 함량 및 식생구성비율 등에 미치는 영향을 구명하였다. 다량요소 양분을 동일 량 시비한 조건에서 7 수준의 미량요소 조합시비는 $T_1$;대구조, $T_2$; Fe, $T_3$; Fe＋Mn, $T_4$: Fe＋Mn＋Cu, $T_5$; Fe＋Mn＋Cu＋Zn, $T_6$ ; Fe＋Mn＋Cu＋Zn＋Mo 및 $T_7$ ;Fe＋Mn＋Cu＋Zn＋Mo＋B로 하였다. 본 IV보에서는 조합시비가 목초 중 미량요소의 함량에 미치는 영향을 검토하였다. 1. 미량요소의 함량은 일반적으로 조합시비, 초종(grass-clover), 재배방법(단파-혼파), 예취 회수 및 추비 유무별 차이를 보였다. 단파재배와 비교해서 혼파에서 orchardgrass는 더 낮은 B와 Fe-함량, 더 높은 Mn, Zn-함량을 보였고 white clover는 이의 반대경향을 보였다. 그러나 Cu와 Mo-함량은 차이를 보이지 않았다. 2. 상대적인 함량 비교에서 일반적으로 $T_7$ 7처리로 orchardgrass의 경우 Cu, Zn 및 Mo-함량은 낮아졌고 Mn-함량은 높아졌다. 이에 비해서 white clover의 경우는 Fe, Mn 및 Cu-함량은 높아졌고 그리고 Mo-함량은 낮아졌다. 목초 중 Fe-함량은 $T_3$(Fe＋Mn)에서 Fe과 Mn 간의 길항작용으로 현저히 낮아졌다. 본 시험재배 조건별 Fe-함량의 변화는 white clover가 orchardgrass보다 상대적으로 더 큰 차이를 보였다. Mn-함량은 초종 간 큰 차이를 보였고 두 목초 공히 Mn을 함유한 조합시비로 크게 증가하였지만 이들 조합시비 간에는 차이가 경미하였다. 3. Mo-함량은 모든 경우 $T_6$ 6및 $T_7$ 에서 다소 높은 수준 이였다. $T_7$ 은 $T_6$ 에 비해서 Mo-함량이 다소 낮아졌다. Mo-과다피해는 B/Mo 비율의 조화 또는 B-시비를 통해서 경감되거나 방지할 수 있는 것으로 보였다. 모든 경우 white clover가 orchardgrass보다 B-함량이 높았고 $T_7$ 에서 B-함량이 크게 증가하였다.

• Bulletin of the Korean Chemical Society
• /
• 제24권11호
• /
• pp.1579-1584
• /
• 2003

An integrated gold microdisk electrode was constructed and modified with metal-porphyrin or metal-phthalocyanines for NO determination in biological media. Microanalysis of NO using square wave anodic stripping voltammetry in $1\;{\times}\;10^{-2}$ M $HClO_4$ was optimal when the accumulation potential was 0.1 V, frequency 100 Hz, and the scan rate was 200 mV/s. When the electrode was modified with metal-porphyrin or metal-phthalocyanines, the anodic peak currents of NO increased due to the catalytic oxidation of NO. In case of Fe(II)-phthalocyanine modified electrode, the peak currents remarkably increased and the sensitivity was high. The calibration curve had good linearity in the range from $3.6\;{\times}\;10^{-5}$ M to $7.2\;{\times}\;10^{-7}$ M, and the detection limit was $5.7\;{\times}\;10^{-7}$ M. For the structural stability and increased sensitivity, Fe(II)-phthalocyanine modified gold microdisk electrode coated with Nafion was applied to determination of NO released from cultured macrophase.

• 한국환경보건학회지
• /
• 제27권4호
• /
• pp.63-71
• /
• 2001

PM 2.5/ samples were measured at two sites, Hadan(suburban site) and Anrak (roadside site) in Busan area. PM 2.5/ sampling was performed for 24-hour intervals by the FH9.5 particulate sampler. Aerosol samples were collected on PTFE filter. A total of 60 particulate samples were collected, dad samples were measured for Particulate mass concentration, metallic elements (Cr, Mn, Ni. Cu. Se, Fe, Pb, and Zn) and waer-soluble elements (C $l^{[-10]}$ , N $O_{3}$$^{[-10]}$ ,S $O_{4}$$^{2-}$, N $H_{4}$$^{+}$, $Ca_{2}$$^{+}$, $Mg_{2}$$^{+}$ and $^{+}$.Mass concentration in Hadan ranged 24.23~57.12 $\mu\textrm{g}$/㎥ and 60.22~72.12 $\mu\textrm{g}$/㎥m Yellow Sand Events. Major cations in Hadan and Anrak site is N $H_{4}$$^{+}$and N $a^{+}$ respectively. SO42$^{[-10]}$ was the abundant specie in the PM 2.5 fraction for Hadan site an dAnrak site. Hadan site showed igher concentration in S $O_{4}$$^{2.1}$ and N $H_{4}$ $^{+}$ In Anrak site the concentration of S $O_{4}$/sip 2-/and N $a^{+}$ was higher than other ions Prominent metallic elements were Fe and Pb in two sites. Principal component analysis showed that main source of PM 2.5 aerosol particles was non-metal related source which was resulted in relating elements as Cr, Ni, and Pb at Hadan site, Anrak site also has resulted PM2.5 aerosol paricles source, which was related its element like Zn, and Ni,. The SAS package analysis also showed that long-range transport effect at Hadan area due to Yellow Sand Event by the prevailing weaterlies.ling weaterlies.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.388-390
• /
• 2002

Two ferredoxin (Fd) fractions, namely, Fd-A and Fd-B were isolated from Heliobacillus mobilis cells, and purified by ammonium sulfate fractionation, DEAE, gel-permeation and Phenyl-Superose column chromatographies under anaerobic conditions. Their absorption spectra were typical of 2[4Fe-4S] cluster type Fds with peaks at about 385 and 280 nm and a shoulder at about 305 nm. Their N-terminal amino acid sequences were determined, which showed that both of them contain a [4Fe-4S] cluster binding motif. Fd-B was sensitive to oxygen, and itsA$_{385}$ value decreased by about 50% in 2 h at 4$^{\circ}C$ under aerobic conditions. In contrast, $A_{385}$ of Fd-A was essentially unchanged up to 24 h under the same conditions.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1285-1292
• /
• 2018

Microstructural properties of as-grown and annealed CoCrFeMnNi high entropy alloy (HEA) oxynitride thin films were investigated. The CoCrFeMnNi HEA oxynitride thin film was grown by magnetron sputtering method using an air gas, and annealed under the argon plus air flow for 5 h at $800^{\circ}C$. The as-grown film was homogeneous and uniform composed of nanometer-sized crystalline regions mixed with amorphous-like phase. The crystalline phase in the as-grown film was face centered cubic structure with the lattice constant of 0.4242 nm. Significant microstructural changes were observed after the annealing process. First, it was fully recrystallized and grain growth happened. Second, Ni-rich region was observed in nanometer-scale range. Third, phase change happened and it was determined to be $Fe_3O_4$ spinel structure with the lattice constant of 0.8326 nm. Hardness and Young's modulus of the as-grown film were 4.1 and 150.5 GPa, while those were 9.4 and 156.4 GPa for the annealed film, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3177-3183
• /
• 2012

The carbon nanofibers (CNFs) used in this study were synthesized with an iron catalyst and ethylene as a carbon source. A concentration of 30 wt % iron(III) acetylacetonate was dissolved in resol type phenol resin and polyurethane foam was put into the solution. The sample was calendered after being cured at $80^{\circ}C$ in air for 24 h. Stabilization and carbonization of the resol type phenol resin and reduction of the $Fe^{3+}$ were completed in a high-temperature furnace by the following steps: 1) heating to $600^{\circ}C$ at a rate of $10^{\circ}C/min$ with a mixture of $H_2/N_2$ for 4 h to reduce the $Fe^{3+}$ to Fe; 2) heating to $1000^{\circ}C$ in $N_2$ at a rate $10^{\circ}C/min$ for 30 minutes for pyrolysis; 3) synthesizing CNFs in a mixture of 20.1% ethylene and $H_2/N_2$ at $700^{\circ}C$ for 2 h using a CVD process. Finally, the structural characterization of the CNFs was performed by scanning electron microscopy and a synthesis analysis was carried out using energy dispersive spectroscopy and X-ray photoelectron spectroscopy. Specific surface area analysis of the CNFs was also performed by $N_2$-sorption.

• 소성∙가공
• /
• 제24권1호
• /
• pp.44-51
• /
• 2015

The current study seeks to examine the effects of V and C additions on the mechanical and low thermal expansion properties of a high strength invar base alloy. The base alloy (Fe-36%Ni-0.9%Co-2.75%Mo-0.7Cr-0.23Mn-0.17Si-0.3%C, wt.%) contains $Mo_2C$ carbides, which form as the main precipitate. In contrast, alloys with additions of 0.4%V+0.3%C (alloy A) or 0.4%V+0.45%C (alloy B) contain $Mo_2C$+[V, Mo]C carbides. The average thermal expansion coefficients of these high strength invar based alloys were measured in the range of $5.16{\sim}5.43{\mu}m/m{\cdot}^{\circ}C$ for temperatures of $15{\sim}230^{\circ}C$. Moreover, alloy B showed lower thermal expansion coefficient than the other alloys in this temperature range. For the mechanical properties, the [V, Mo]C improved hardness and strengths(Y.S. and T.S.) of the high strength invar base alloy. T.S.(tensile strength) and Y.S.(yield strength) of hot forged alloy B specimen were measured at 844.6MPa and 518.0MPa, respectively. The tensile fractography of alloy B exhibited a ductile transgranular fracture mode and voids were initiated between the [V, Mo]C particles and the matrix. Superior properties of high strength and low thermal expansion coefficient can be obtained by [V, Mo]C precipitation in alloy B with the addition of 0.4%V and 0.45%C.