• Current Research on Agriculture and Life Sciences
• /
• v.16
• /
• pp.45-54
• /
• 1998

A thermotolerant bacterium, Streptomyces thermocyaneoviolaceus which produced xylan-degrading enzymes, utilized excellently xylan of wheat bran by producing the enzymes in comparison with that of birchwood or oat spelts. Optimal enzyme production was achieved in WB medium containing 0.8% wheat bran, 0.06% yeast extract, 0.06% bactopeptone, 0.05% $MgSO_4{\cdot}7H_2O$, 0.05% $FeSO_4{\cdot}7H_2O$, 0.05% $KH_2PO_4$ and, 0.2% $K_2HPO_4$(pH 7.0) at $50^{\circ}C$ for 24 hrs. The optimal pH and temperature for the hydrolysis of xylan were pH 5.5 and $65^{\circ}C$, respectively. The enzyme activity was retained more than 80% at the range from pH 4.5 to pH 9.5 at $4^{\circ}C$ for 12 hrs and 94% on the heat-treatment at $65^{\circ}C$ for 1 hr. Xylobiose, xylotriose, xylose, and other xylooligosaccharides were produced as end products from hydrolysis of birchwood xylan by the xylanase of S. thermocyaneoviolceus.

• Korean Journal of Materials Research
• /
• v.16 no.8
• /
• pp.497-502
• /
• 2006

Recently, many attention have been focused on illite as a material for the well-being industry. Illite contains various kinds of iron bearing materials and they restrict their usage. In this study, Fe impurities in the illite produced in Yeongdong-gun, Chungcheongbuk-do were characterized and their removal experiments were performed. According to the characterization of illite raw ore, it contained 1.54 wt.%$Fe_2O_3$ due to the existence of iron oxide($Fe_2O_3$) and pyrite($FeS_2$). The raw ore was crushed into 3 mm or less using cone crusher and then ground by rod mill for the liberation of impurity mineral. For the removal of iron bearing minerals, an acid treatment, a flotation, a magnetic separation, and a flotation combined with magnetic separator were performed respectively. When the illite raw ore was treated with magnetic separation and various kinds of acid, 1.54wt.%. $Fe_2O_3$ content was reduced to 0.78 and 1.0 wt.%, respectively. On the other hand $Fe_2O_3$ content was reduced to be 0.52 wt.% after flotation. These results indicate that iron bearing minerals cannot be reduced below 0.3wt.%$Fe_2O_3$. However, combination of magnetic separation and flotation enable us to get 0.24wt.% of illite concentrate. It is concluded that, for the refinement of illite from Yeongdong-gun, the flotation combined with magnetic separation is good for high purity illite.

• Journal of Magnetics
• /
• v.2 no.1
• /
• pp.22-24
• /
• 1997

FeN thin films were deposited by RF-reactive diode sputtering to investigate magnetic characteristics variation due to substrate tilt during the film deposition, and their magnetic properties were measured by VSM, SEM and AFM. When the substrate tilt pivot edges were parallel to the applied field, the magnetic anisotropy was increased When the substrate tilt pivot edges were perpendicular to the applied field, the easy magnetization axis became the hard magnetization axis, and the hard axis became the easy axis as the tilt angles were increased. The reason is believed to be due to the fact that the tilt induced shape magnetic anisotropy became larger than the field induced magnetic anisotropy by DC magnetic field as the crystal grains are enlongated along the substrate tilt pivot edges due to "oblique incidence anisotropy" commonly found in eveporated thin films.

• Journal of the Korean Magnetics Society
• /
• v.13 no.2
• /
• pp.53-58
• /
• 2003

Annealing effects of exchange bias fields ($H_{2ex}$(top), $H_{lex}$ (bottom)) on composite type NiFe/[FeMn/Mn]$_{80}$/NiFe multilayers have been studied. Three samples with ultra-thin Mn inserted layers on glass/Ta(50 $\AA$)/NiFe(150 $\AA$)/[F $e_{53}$M $n_{47}$(1.25 $\AA$)/Mn(0 $\AA$, 0.11 $\AA$, 0.3 $\AA$)]$_{80}$/NiFe(90 $\AA$)/Ta(50 $\AA$) were prepared by ion beam sputtering. The average x-ray diffraction peak ratios NiFe(111) of FeMn (111) fcc textures for the Mn inserted total thicknesses of 0 $\AA$, 9 $\AA$, and 24 $\AA$ were about 0.65, 0.90, and 1.5, respectively. For the sample without Mn inserted layer, the $H_{2ex}$ of 260 Oe up to 300 $^{\circ}C$ disappeared at 350 $^{\circ}C$. For two multilayer samples with ultra-thin Mn layers of 0.11 $\AA$ and 0.3 $\AA$, the $H_{2exs}$ of 310 Oe and 180 Oe up to 300 $^{\circ}C$ endured of 215 Oe and 180 Oe at 350 $^{\circ}C$, respectively. The $H_{ex}$ (bottom)s of three samples decreased from 100 Oe to 70 Oe up to 250 $^{\circ}C$, while these values increased beyond 300 $^{\circ}C$. This observation can be attributed to less diffusive path of Mn atoms in bottom NiFe than top NiFe layer. The top and bottom coercive fields slightly varied about 5 Oe∼10 Oe. From these results, we could obtain the enhancement of exchange coupling intensity and thermal stability by an ultra-thin Mn inserted layer on NiFe/[FeMn/Mn]$_{80}$/NiFe Multilayers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.183-183
• /
• 2011

Multiferroic materials have been widely studied in recent years, because of their abundant physics and potential applications in the sensors, data storage, and spintronics. $BiFeO_3$ is one of the well-known single-phase multiferroic materials with $ABO_3$ structure and G-type antiferromagnetic behavior below the Neel temperature $T_N$ ~ 643 K, but the ferroelectric behavior below the Curie temperature $T_c$~1,103 K. In this study, the $BiFe_{1-x}Ni_xO_3$ (x=0 and 0.05) bulk ceramics were prepared by solid-state reaction and rapid sintering with high-purity $Bi_2O_32$, $Fe_3O_4$ and NiO powders. The powders of stoichiometric proportions were mixed, as in the previous investigations, and calcined at 450$^{\circ}C$ for $BiFe_{1-x}Ni_xO_3$ for 24 h. The obtained powders were grinded, and pressed into 5-mm-thick disks of 1/2-inch diameter. The disks were directly put into the oven, which has been heated up to 800$^{\circ}C$ and sintered in air for 20 min. The sintered disks were taken out from the oven and cooled to room temperature within several min. The phase of samples was checked at room temperature by powder x-ray diffraction using a Rigaku Miniflex diffractometer with Cu K${\alpha}$ radiation. The Raman measurements were carried out by employing a hand-made Raman spectrometer with 514.5-nm-excitation $Ar^+$ laser source under air ambient condition on a focused area of 1-${\mu}m$ diameter. The field-dependent magnetization measurements were performed with a superconducting quantum-interference-device magnetometer.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.2
• /
• pp.98-105
• /
• 2005

Groundwater sampled from 24 tube wells of three districts namely Sherpur, Gaibandha and Naogaon in Bangladesh was appraised for their water quality for irrigation and agro-based industrial usage. All waters under test were slightly alkaline to alkaline (pH = 7.2 to 8.4) in nature and were not problematic for crop production. As total dissolved solid (TDS), all groundwater samples were classified as fresh water (TDS<1,000 mg/L) in quality. Electrical conductivity (EC) and sodium adsorption ratio (SAR) values reflected that waters under test were under medium salinity (C2), high salinity (C3) and also low alkalinity (S1) hazard classes expressed as C2S1 and C3S1. As regards to EC and soluble sodium percentage (SSP), groundwater samples were graded as good and permissible in category based on soil properties and crop growth. All water samples were free from residual sodium carbonate (RSC) and belonged to suitable in category. Water samples were under soft moderately hard, hard and very hard classes. Manganese, bicarbonate and nitrate ions were considered as major pollutants in some water samples and might pose threat in soil ecosystem for long-term irrigation. For most of the agro-based industrial usage, Fe and Cl were considered as troublesome ions. On the basis of TDS and hardness, groundwater samples were not suitable for specific industry. Some water samples were found suitable for specific industry but none of these waters were suitable for all industries. The relationship between water quality parameters and major ions was established. The correlation between major ionic constituents like Ca, Mg, K, Na, $HCO_3$ and Cl differed significantly. Dominant synergistic relationships were observed between EC-TDS, SAR-SSP, EC-Hardness, TDS-Hardness and RSC-Hardness.

• Asian Journal of Turfgrass Science
• /
• v.24 no.2
• /
• pp.138-144
• /
• 2010

This study was conducted to investigate the effect of Lactobacillus sp. and Saccharomyces sp. on turf quality, shoot and root growth of creeping betgrass in golf course by measuring turf color index, chlorophyll content, dry weight of shoot and root, T/R ratio and root length. Fertilizer treatment was designed as follows; nonfertilizer (NF), control (CF; compound fertilizer), microorganism medium(MO; CF+MO)), microorganism medium contained Fe(MO-Fe; CF+MO-Fe) and microorganisum medium contained S (MO-S; CF+MO-S). Soil properties investigated after experiment was scarcely affected by applied fertilizers in root zone of creeping bentgrass. The turf color index and chlorophyll index of MO, MO-Fe, MO-S treatment were higher than those of NF, and similar to those of CF. The turfgrass root in MO and MO-Fe treatment was longer than others. The dry weight of shoot in MO and MO-S was higher than CF and that of root in MO and MO-Fe, and dry weight of MO was increased than that of NF and CF, by 26% and 6%, respectively. AS compared with NF, T/R ratio of CF, MO, MO-Fe and MO-S was increased, and MO and MO-Fe was similar to CF, MO-S higher. Nutrient content in CF, MO, MO-Fe and MO-S was contained more than in NF, and it was higher in shoot. These was suggested that application of MO induced the development of quality and growth of creeping bentgrass by assisting root growth and nutrients uptake.

• Journal of Nutrition and Health
• /
• v.46 no.4
• /
• pp.332-345
• /
• 2013

The aim of this study was to evaluate the nutritional status of elementary and middle school students by gender with an emphasis on comparison of nutritional intake between weekday and weekend. Survey construct included one 24-hour diet recall and two diet records, short food frequency questionnaire, and anthropometry. Eating behaviors and nutritional intake were largely different for four groups divided by age and gender: ME, FE, MM, and FM. Frequency of consumption of healthful foods was significantly higher in the ME and FE groups. The highest and lowest scores for frequency of eating with parents were observed in the FE and FM groups, respectively. The amount of consumption of food groups was lower on weekends than on weekdays and this trend was more prominent in elementary schoolers compared with middle schoolers. In terms of food group consumption as well as energy and nutrient intake, the ME group showed the greatest differences between weekday and weekend, followed by FE, MM, and FM, in descending order. A significantly higher amount of potassium, phosphorus, and calcium was consumed on weekdays than on the weekend in the ME and FE groups. The amount of energy and nutrient intake was smallest in the FM group; however, the difference between weekday and weekend was minimal as well. In comparison of the subjects' energy and nutrient intake with their Korean Dietary Reference Intakes values (%KDRI), the MM group showed the most undesirable results for energy, protein, dietary fiber, vitamin A, vitamin $B_1$, vitamin $B_2$, niacin, vitamin $B_6$, calcium, and zinc. Overall, findings indicated that nutritional intake status may differ between weekday and weekend for elementary and middle schoolers by gender, suggesting that youth may benefit from nutritional education programs that stress the impact of gender and weekend effect on their dietary intake.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.1
• /
• pp.24-29
• /
• 2012

BACKGROUND: In recent years, microbial fuel cells (MFCs) have emerged as a promising technology for recovering renewable energy from waste biomass, especially wastewater. In this study, the possibility of bioelectricity generation in two chambered mediator-less microbial fuel cells (MFCs) was successfully demonstrated using fermentable and non-fermentable substrates. METHODS AND RESULTS: Two different electron acceptors have been tested in the cathode chamber for the effects of reducing agent on the power generation in MFCs. The average voltages of $0.26{\pm}0.014$ V and $0.36{\pm}0.02$ V were achieved with acetate using oxygen and potassium ferricyanide as reducing agent, respectively. Similarly, with glucose the average voltages of $0.256{\pm}0.05$ V and $0.340{\pm}0.04$ V were obtained using oxygen and ferricyanide, respectively. Using potassium ferricyanide as the reducing agent, the power output increases by 39 and 43% with acetate and glucose, respectively, as compared to the dissolved oxygen. Slightly higher coulombic efficiency (CE%) was obtained in acetate as compared to MFCs operated with glucose. The maximum power densities of 124 mW/$m^2$ and 204 mW/$m^2$ were obtained using dissolved oxygen and $K_3Fe(CN)_6$, respectively. CONCLUSION(s): This study demonstrates that power generation from the MFCs can be influenced significantly by the different types of catholyte. Relatively higher CE was obtained with $K_3Fe(CN)_6$. Thus, application of $K_3Fe(CN)_6$ as the catholyte can be vital for scaling uppower generation from the MFCs forreal time applications.

• Economic and Environmental Geology
• /
• v.43 no.3
• /
• pp.269-278
• /
• 2010

We investigated characteristics of the coloring material of Dancheong pigments and hope that this study contributes the revival of traditional Dancheong pigments color. For this purpose, we collected Dancheong fragment samples that fell off naturally from old wooden buildings in Gwangju and Jeonnam and analyzed the natural coloring material by XRD and EDS-SEM analysis method. In white pigments of Dancheong fragments, it is confirmed that gypsum$(CaSO_{4}{\cdot}2H_{2}O)$, quartz$(SiO_{2})$, white lead$(PbCO_{3})$ and calcite$(CaCO_{3})$ which have been used for white pigments since ancient times and $TiO_{2}$ which is common used in modern times. In red pigments of Dancheong fragments, it is confirmed that hematite$(Fe_{2}O_{3})$ and red lead$(Pb_{3}O_{4})$, which have been used for red pigments since ancient times and C.I. pigment orange $13(C_{32}H_{24}C_{12}N_{8}O_{2})$ but there is no cinnabar(HgS) which has been used since B.C. 3000 in China. In yellow pigments of Dancheong fragments, it is confirmed that crocoite$(PbCrO_{4})$ and massicot(PbO). In blue pigments of Dancheong fragments, it is confirmed that sodalite$(Na_{4}BeAlSi_{4}O_{12}Cl)$ and nosean $(Na_{8}Al_{6}Si_{6}O_{24}SO_{4})$ as coloring material of blue pigment and C.I. pigments blue $29(Na_{7}Al_{6}Si_{6}O_{24}S_{3})$ which is used in modern times. In green pigments of Dancheong fragments, it is confirmed that calumetite$(Cu(OHCI)_{2}{\cdot}2H_{2}O)$, escolaite(Cr2O3), dichromium trioxide$(Cr_{2}O_{3})$, emerald green$(C_{2}H_{3}As_{3}Cu_{2}O_{8})$, and C.I. pigments green$(C_{32}H_{16}-XCl_{x}Cu_{8})$ which is used in modern time. In black pigments of Dancheong fragments, Chiness ink(carbon black) is confirmed.