• 조명전기설비학회논문지
• /
• 제24권10호
• /
• pp.67-72
• /
• 2010

G8 summit meeting held in July 2008 decided to set up a long-term goal, by 2050, reducing the world greenhouse emissions by half of those emitted in 1990. In November 2009, the Government announced to reduce the national $CO_2$ emission by 30[%] of BAU by 2020. Electric power industries in Korea produce most of their electricity by burning fossil fuels, and emit approximately 28[%] of national $CO_2$ emissions. Monitoring the $CO_2$ emissions. Monitoring the $CO_2$ emission of electric power plants is very important. This paper presents a method to calculate the hourly $CO_2$ emission for a thermal power plant burning mixture of coal and oil using the performance test data and coal-oil mix rate. An example of $CO_2$ emission calculation is also demonstrated.

• 한국대기환경학회지
• /
• 제24권2호
• /
• pp.189-195
• /
• 2008

We developed emission factors for alternative fuels used in cement industries in Korea and also estimated reduction in emissions of greenhouse gas (GHG) by the use of alternative fuels. Emission factors for GHG of waste tire, waste plastic, waste oil and RDF were estimated to be about 89, 78, 77 and 95 ton $CO_2$/TJ respectively. When compared with previous studies, most of the results showed similar trends. The calorific value estimation and elemental analysis for energy source were implemented in order to estimate the exact emission factors and the reduction of GHG emissions using alternative fuel. In the case of 'A' company, $CO_2$ emission from alternative fuels was about 4% lower than that of bituminous coal only. Also in case of company 'B', $CO_2$ emission from alternative fuels was about 1.4% lower than that of only bituminous coal. In Germany and Japan, alternative fuel is not regarded to be fuel consumption in cement industry. When applying this rule, the emission reductions were about 4.3% for company 'A' and 6.3% for company 'B'. The results of this study may be considered as a useful information for developing strategies in reducing GHG emissions.

• 한국대기환경학회지
• /
• 제24권2호
• /
• pp.249-258
• /
• 2008

Historical emission data for 11 polychlorinated biphenyls (PCBs) and a regional multimedia environmental model, CoZMo-POP 2, were used to predict air concentrations and congener patterns in Korea. The total emission value for South Korea was allocated to sub-provinces and cities based on their population. The spatial distribution of PCB emissions was generally correlated with that of measured atmospheric levels, suggesting that population could be a good surrogate for the intensity of PCB emission in Korea. The simulated time trends of air concentrations well reflected those of emission with a peak in the mid-1970s and insignificant levels in the 2030s. The model predicted that the contribution of volatile PCBs had increased after emission reduction iii the 1970s. This trend would continue until the early 2030s. The measured and modeled PCB levels in the 2000s were in an agreement of an order of magnitude, and their congener patterns were very similar. Consequently, despite of high uncertainty for emission estimates, the emission data for Korea used in this study is considered to be reliable. The results of this study could be compared with simulation data based on a new emission inventory to be developed by measurements in the near future.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.1936-1941
• /
• 2010

This purpose of this paper is to propose a methodology for optimal generating operation in power system to minimize the cost of generation subject to not only system constraints but also regional $CO_2$ emission constraints. To solve this ELD problem calculated range limit on minimum and maximum power outputs by regional Equal Generator how each regional capacity is connected into one and expressed Equal Fuel Cost Function considering regional $CO_2$ emission constraints. Accordingly, being modified regional load, new power outputs considering regional $CO_2$ emission constraints were calculated by ELD. The proposed model for evaluating availability is tested on IEEE RTS(Reliability Test System)-24 in detail.

• Journal of Construction Engineering and Project Management
• /
• 제2권2호
• /
• pp.53-60
• /
• 2012

Accurate assessment of $CO_2$ emission from buildings requires gathering $CO_2$ emission data of various construction materials. Unfortunately, the amount of available data is limited in most countries. This study was conducted to present the $CO_2$ emission data of concrete, which is the most important construction material in Korea, by conducting a statistical analysis of the concrete mix proportion. Finally, regression models that can be used to estimate the $CO_2$ emission of concrete in all strengths were developed, and the validity of these models was evaluated using 24 and 35MPa concrete data. The validation test showed that the error ratio of the estimated value did not exceed a maximum of 5.33%. This signifies that the models can be used in acquiring the $CO_2$ emission data of concrete in all strengths. The proposed equations can be used in assessing the environmental impact of various construction structural designs by presenting the $CO_2$ emission data of all concrete types.

• KIEAE Journal
• /
• 제13권5호
• /
• pp.79-88
• /
• 2013

This study creates the evaluation criteria to analyze the $CO_2$ emission quantity in the complex of apartment house among domestic buildings and proposes how to calculate the $CO_2$ emission quantity by the only simple information of apartment house. The study shows that in order to create the index of carbon emission evaluation criteria, $CO_2$ emission quantity for its input materials in these 27 apartment houses are 445,412g-$CO_2/m^2$ for apartment building, 474,322g-$CO_2/m^2$ for the basement parking lot, 483,523g-$CO_2/m^2$ for welfare facility, 729,957g-$CO_2/m^2$ for sales facility, 743,560g-$CO_2/m^2$ for other facility, 26,782g-$CO_2/m^2$ for public facility, 43,659g-$CO_2/m^2$ for landscape, 1,113g-$CO_2/m^2$ for indoor facility, 11,251g-$CO_2/m^2$ for outdoor facility and 891g-$CO_2/m^2$ for common temporary based on the average $CO_2$ emission by facility. We can also see the analysis data that in case of using the selected factors only, the rate of error is 7.51% comparing with the emission quantity by using simplified LCA method this study suggests for the whole range of apartment houses and the rate of error is average 3.24% using selective and main materials. And this it is evaluated that we can get the result which is similar to the actual $CO_2$ emission quantity with only the simple information about the apartment house.

• 한국환경과학회지
• /
• 제7권5호
• /
• pp.647-652
• /
• 1998

This study is to find out the emission estimation in Kimhae area. For this purpose, the Kimhae statistical yearbook and data of waste facilities issued by Kimhae city and the report on energy census issued by the ministry of trade, industry and energy are used. Each item for the emission estimation is $SO_2$, CO, HC, Nox, TSP from point, line, area sources. The results were as follows; The air pollutants with the highest mont of emission from the emission sources is CO followed by Nox, $SO_2$, TSP, HC in descending order of magnitude. The emission consists of 66.15% of line, 24.65% of area and 9.20% of point sources at Kimhae.

• 콘크리트학회논문집
• /
• 제24권5호
• /
• pp.597-604
• /
• 2012

이 연구에서는 2464개의 시멘트 콘크리트 배합과 776개의 혼화재가 치환된 혼합 시멘트 콘크리트 배합을 포함하는 실험 데이터베이스를 이용하여 콘크리트 압축강도 및 혼화재 치환율에 따른 콘크리트 $CO_2$ 배출량을 평가하였다. 국내 생애주기 데이터 목록에 기반한 콘크리트 $CO_2$ 평가에서 고려된 시스템은 요람에서 현장 콘크리트 타설 전까지로서 구성재료, 운반 및 생산단계를 포함하고 있다. 콘크리트의 성능 효율성 지표로서 결합재 지수와 $CO_2$ 지수가 분석되었으며, 콘크리트 $CO_2$ 배출량을 평가하기 위한 단순 식이 각 혼화재의 치환비 및 콘크리트 압축강도의 함수로서 제시되었다. 따라서 이 제안된 모델은 목표 압축강도 및 목표 시멘트 콘크리트 대비 $CO_2$ 배출 저감율을 만족하는 콘크리트 배합설계를 위하여 단위 결합재 양 및 혼화재 종류와 치환비를 결정하는 데 가이드 라인으로서 유용하게 이용될 수 있을 것으로 기대된다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권3호
• /
• pp.51-58
• /
• 1994

Environmental conservation has become one of the greatest concerns of all the people in the world. This issue is related to wood utilization in two major view points such as carbon dioxide emitted by the use of manufacturing energy and absorbed during the growth of trees. Wood construction materials require less manufacturing energy, which, in turn, means less carbon dioxide emission. In addition, wood keeps absorbed carbon in itself as far as it is not burnt. Therefore, wood is environmentally superior to other materials in terms of potential effects on atmospheric carbon dioxide. As examples of the environmental effect of wood utilization, the following two results were obtained: 1) If wood construction becomes popular in Korea as in Japan, more than 24% of carbon dioxide emission during construction of residential housings can be reduced: and 2) If aluminum windows are substituted by wood windows, more than 19% of carbon dioxide emission can be reduced. If the principle of "cut and plant" is kept well, wood is the best construction material for environmental protection as well as human residence.

• 공업화학
• /
• 제28권1호
• /
• pp.112-117
• /
• 2017

이 연구에서는 피페라지노메틸-비스-포스폰산(PIPEABP), 메틸피페라지노메틸-비스-포스폰산(MPIPEABP), N,N-디메틸렌디아미노메틸-비스-포스폰산(MDEDAP) 그리고 비스-디메틸아미노메틸 포스핀산(DMDAP)의 화학 첨가제로 처리된 중질섬유판(MDF)의 연소가스 발생을 시험하였다. 15 wt%의 인-질소산류 첨가제 수용액으로 중질섬유판에 붓으로 3회 칠하여 실온에서 건조시킨 후, 콘칼로리미터(Conecalorimeter, ISO 5660-1, 2)를 이용하여 연소가스의 발생을 시험하였다. 그 결과, 인-질소산류 첨가제로 처리한 시험편의 최대연기발생률($SPR_{peak}$)은 무처리 시험편에 비교하여 18.5~41.5%로 낮게 나타내었다. 그러나 인-질소산류 첨가제로 처리한 시험편에 대한 최대일산화탄소 생성($CO_{peak}$), (6.7~24.2)%은 공시험편보다 높게 나타났다. 또한 최대이산화탄소 발생($CO_{2peak}$), (4.2~24.4)%은 공시험편보다 낮게 나타났다. 반면에 $O_2$의 최대결핍률은 사람에게 치명적일 수 있는 수준인 15%보다 훨씬 높으므로 그로 인한 위험성은 피할 수 있었다. 결론적으로 MDF에 인-질소산류로 처리한 시험편은 부분적으로 연소성이 억제되었다. 그러나 일산화탄소의 감소에는 부정적인 영향을 미쳤다.