• 제목/요약/키워드: %24Bi_2%24%24O_3%24

검색결과 74건 처리시간 0.024초

Na1/2Bi1/2TiO3-BaTiO3 계에서 입자모양과 입자성장 거동 (Grain Shape and Grain Growth Behavior in the Na1/2Bi1/2TiO3-BaTiO3 System)

  • 문경석;강석중
    • 한국분말재료학회지
    • /
    • 제13권2호
    • /
    • pp.119-123
    • /
    • 2006
  • The grain growth behavior of $0.95Na_{1/2}Bi_{1/2}TiO_{3}-0.05BaTiO_{3}$ (NBT-5BT) has been investigated with respect to the grain shape. The powder compacts of NBT-5BT were sintered at 1200 for various times. The corresponding equilibrium shape was a round-edged cube with flat {100}-faces. Abnormal grains were not observed in the specimens sintered for 1 to 12 h but abnormal grains appeared when sintered for 24 h. Before the formation of abnormal grains, a valley was observed in the measured grain size distribution of NBT-5BT, showing that the grain size distribution was a combination of two unimodal distributions. The present result suggests that the grain growth in NBT-5BT was governed by the growth of facet planes which would occur via 2-dimansional nucleation and growth.

Y2O3-BN 복합체의 미세구조 및 내플라즈마 특성 (Microstructure and plasma resistance of Y2O3-BN composites)

  • 이현규;이석신;김비룡;박태언;윤영훈
    • 한국결정성장학회지
    • /
    • 제24권3호
    • /
    • pp.127-132
    • /
    • 2014
  • $Y_2O_3$-BN 세라믹 복합체를 제작하기 위해서, 분말 입도 $3{\sim}10{\mu}m$$Y_2O_3$ 분말을 분산한 슬러리에 pH 조절제인 NaOH를 첨가하였으며 결합제로는 PVA, 가소제로는 PEG를, BN 분말과 혼합하고, 분무건조(spray drying)공정을 거쳐 $Y_2O_3$ 혼합 분말을 제조하였다. ${\O}14mm$ 크기의 $Y_2O_3$-BN 시편을 성형하고, $1550^{\circ}C$$1600^{\circ}C$에서 소결하여 $Y_2O_3$-BN 복합체를 제작하였다. BN 투입량과 소결온도의 변수에 따른 미세구조, 순도, 꺽임강도, 열팽창계수, 밀도, 체적저항, 내플라즈마 특성을 조사하였다.

Varistor Properties and Aging Behavior of V/Mn/Co/ La/Dy Co-doped Zinc Oxide Ceramics Modified with Various Additives

  • Nahm, Choon-Woo
    • Transactions on Electrical and Electronic Materials
    • /
    • 제15권5호
    • /
    • pp.284-289
    • /
    • 2014
  • The effects of additives (Nb, Bi and Cr) on the microstructure, varistor properties, and aging behavior of V/Mn/Co/ La/Dy co-doped zinc oxide ceramics were systematically investigated. An analysis of the microstructure showed that all of the ceramics that were modified with various additives were composed of zinc oxide grain as the main phase, and secondary phases such as $Zn_3(VO_4)_2$, $ZnV_2O_4$, and $DyVO_4$. The $Bi_2O_3$-modified samples exhibited the lowest density, the $Nb_2O_5$-modified sample exhibited the largest average grain size, and the $Cr_2O_3$-modified samples exhibited the highest breakdown field. All additives improved the non-ohmic coefficient (${\alpha}$) by either a small or a large margin, and in particular an $Nb_2O_5$ additive noticeably increased the non-ohmic coefficient to be as large as 36. The $Bi_2O_3$-modified samples exhibited the highest stability with variation rates for the breakdown field and for the non-ohmic coefficient (${\alpha}$) of -1.2% and -26.3%, respectively, after application of a DC accelerated aging stress of 0.85 EB/$85^{\circ}C$/24 h.

SrTiO3계 GBL Capacitor의 미세구조 및 유전특성 (Microstructure and Dielectric Properties of a SrTiO3-based GBL Capacitor)

  • 천채일;김호기
    • 한국세라믹학회지
    • /
    • 제24권3호
    • /
    • pp.270-276
    • /
    • 1987
  • The microstructure and dielectric properties of a SrTiO3-based GBL (Grain Boundary Layer) capacitor were investigated. The 0.6 mol% Nb2O5 doped SrTiO3 was sintered for 3 hr at 1450$^{\circ}C$ in mixed gas(N2/H2) atmosphere. The Nb2O5 promoted the grain growth of the SrTiO3 ceramics was decreased with the amount of Nb2O5. The oxide mixture(PbO, Bi2O3, B2O3) were painted on the reduced specimen and fired at 1000$^{\circ}C$ to 1100$^{\circ}C$ in air. The penetrated oxide mixture into specimen were located in grain boundaries. A SrTiO3-based GBL capacitor had the apparent permittivity of about 3.0${\times}$104, the dielectric loss of 0.01-0.02, and insulating resistance of 108-109$\Omega$.cm. The capacitor had the stable temperature coefficient of capacitance and exhibited dielectric dispersion over 107 Hz. The capacitance-voltage measurements indicated that the grain boundary was composed of the continuous insulating layers.

  • PDF

기판 조건에 따른 SBT 강유전체 커패시터의 특성 (Capacitor characteristics of SBT Ferroelectric Thin Films depending on substrate conditions)

  • 박상준;장건익
    • 한국전기전자재료학회논문지
    • /
    • 제13권2호
    • /
    • pp.143-150
    • /
    • 2000
  • Ferroelectric SrxBi2+yTa2O9+$\alpha$ thin films with various compositions(x=0.7, 0.8, 1, y=0.3, 0.4) were prepared by sol-gel method. The film with moled ratio of 0.8:2.3:2.0 in Sr/Bi/Ta, which was deposited on Pt/SiO2/Si (100), showed better ferroelectric properties than other films. To investigate substrate effects, the same compositions were spin coated on Pt/Ti/SiO2/Si (100) substrates. At an applied voltage of 5V, the dielectric constant($\varepsilon$r), remanent polarization (2Pr) and coercive field (Ec) of the Sr0.8Bi2.3Ta2O9+$\alpha$ thin film prepared on Pt/Ti/SiO2/Si (100) were about 296, 24$\mu$C/$\textrm{cm}^2$ and Ec of 49kV/cm respectively. Both SBT films firred at 80$0^{\circ}C$ revealed no fatigue up to 1010 cycles. Retention characteristics of these capacitors showed no degradation up to 104 sec.

  • PDF

저온 소결 세라믹스용 SiO2-B2O3-R(CaO, BaO, ZnO, Bi2O3 붕규산염계 세라믹/유리 복합체의 특성 (The Properties on Ceramic/glass Composites of SiO2-B2O3-R(CaO, BaO, ZnO, Bi2O3 Borosilicate Glass System for Low Temperature Ceramics)

  • 김관수;윤상옥;심상흥;박종국
    • 한국전기전자재료학회논문지
    • /
    • 제20권1호
    • /
    • pp.19-24
    • /
    • 2007
  • The effects of $B_2O_3-SiO_2-R(R;CaO,\;BaO,\;ZnO,\;Bi_2O_3)$ borosilicate glass system on the sintering behavior and microwave dielectric properties of ceramic/glass composites were investigated as functions of modifier, glass addition ($30{\sim}50\;vol%$) and sintering temperature ($500{\sim}900^{\circ}C$ for 2 hrs). The addition of 50 and 45 vol% glass ensured successful sintering below $900^{\circ}C$. Sintering characteristics of the composites were well described in terms of modifier. Borosilicate glass enhanced the reaction with $Al_{2}O_{3}$ to form pores, second phases and liquid phases, which was responsible to component of modifier. Dielectric constant (${\varepsilon}_{r},\;Q{\times}f_{o}$) and temperature coefficient of resonant frequency (${\tau}_{f}$) of the composite with 50 and 45 vol% glass contents($B_{2}O_{3}:SiO_{2}:R=25:10:65$) demonstrated A-CaBS(7.8, 2,560 GHz, -81ppm/$^{\circ}C$), A-BaBs(5.8, 3.130 GHz, -64 ppm/$^{\circ}C$), A-ZnBS(5.7, 17,800 GHz, -21 ppm/$^{\circ}C$), A-BiBs(45 vol% glass in total)(8.3, 2,700 GHz, -45 ppm/$^{\circ}C$) which is applicable to substrate requiring an low dielectric properties.

광양 폐금광 수계에 형성된 철수산화물에 대한 광물학적 및 지구화학적 특성 (Mineralogy and Geochemistry of Iron Hydroxides in the Stream of Abandoned Gold Mine in Kwangyang, Korea)

  • 박천영;정연중;김성구
    • 한국지구과학회지
    • /
    • 제22권3호
    • /
    • pp.208-222
    • /
    • 2001
  • 이 연구는 전남 광양광산과 그 주변의 하천에 형성되어 있는 부유성 비정질 퇴적물의 지구화학적 특성을 밝히기 위해 수행되었다. 부유성 비정질 퇴적물의 주요성분은 Fe$_2$O$_3$이며, Fe$_2$O$_3$의 함량은 17.9${\cdot}$72.3wt.% 범위로 나타난다. Fe함량이 증가하면 Si, Al, Mg, Na, K, Mn 및 Ti 함량이 감소하며 Te, Au, Ga, Bi, Cd, Hg, Sb, 및 Se등의 함량은 증가한다. 하상 침전물인 비정질 퇴적물에는 As(최대 54.9ppm), Bi(최대 3.77ppm), Cd(최대 3.65ppm), Hg(최대64ppm), Sb(최대 10.1ppm), Cu (최대 37.1ppm), Mo(최대 8.86ppm), Pb(최대 9.45ppm) 및 Zn(최대 29.7ppm) 등의 중금속원소가 농집되어 있다. 황갈색 침전물에는 Au(최대 4.40ppm)와 Ag(최대 0.24ppm) 함량이 매우 높게 나타나며, Au함량은 하천의 상류지역에 높은 함량을 보이다가 하류지역으로 갈수록 그 함량이 감소한다. 반면에 Ag 함량은 상류지역의 하천에 낮은 함량을 보이다가 하류지역으로 갈수록 그 함량이 증가하여 나타난다. XRD분석에서 하상의 황갈색 침전물은 X-선회절선이 뚜렷하지 않은 비정질이거나 결정도가 미약한 철수산화물로 밝혀졌으며, 석영, 침철석, 고령토, 일라이트 등이 관찰된다. IR분석에서 비정질 하상 퇴적물은 OH기, H$_2$O, SO$_4$ 및 Fe-O 기에 의한 흡수밴드가 관찰된다.

  • PDF

Sb/Bi비가 ZnO-Bi2O3-Sb2O3-NiO-Cr2O3 바리스터의 소결과 입계 특성에 미치는 영향 (Effect of Sb/Bi Ratio on Sintering and Grain Boundary Properties of ZnO-Bi2O3-Sb2O3-NiO-Cr2O3 Varistor)

  • 홍연우;이영진;김세기;김진호
    • 한국재료학회지
    • /
    • 제22권12호
    • /
    • pp.689-695
    • /
    • 2012
  • We have examined the co-doping effects of 1/2 mol% NiO and 1/4 mol% $Cr_2O_3$ (Ni:Cr = 1:1) on the reaction, microstructure, and electrical properties, such as the bulk defects and the grain boundary properties, of ZnO-$Bi_2O_3-Sb_2O_3$ (ZBS; Sb/Bi = 0.5, 1.0, and 2.0) varistors. The sintering and electrical properties of Ni,Cr-doped ZBS, ZBS(NiCr) varistors were controlled using the Sb/Bi ratio. Pyrochlore ($Zn_2Bi_3Sb_3O_{14}$), ${\alpha}$-spinel ($Zn_7Sb_2O_{12}$), and ${\delta}-Bi_2O_3$ were detected for all of compositions. For the sample with Sb/Bi = 1.0, the Pyrochlore was decomposed and promoted densification at lower temperature by Ni rather than by Cr. A homogeneous microstructure was obtained for all of the samples affected by ${\alpha}$-spinel. The varistor characteristics were not dramatically improved (non-linear coefficient, ${\alpha}$ = 5~24), and seemed to form ${Zn_i}^{{\cdot}{\cdot}}$(0.17 eV) and ${V_o}^{\cdot}$(0.33 eV) as dominant defects. From impedance and modulus spectroscopy, the grain boundaries were found to have been divided into two types, i.e., one is tentatively assigned to ZnO/$Bi_2O_3$ (Ni,Cr)/ZnO (0.98 eV) and the other is assigned to a ZnO/ZnO (~1.5 eV) homojunction.

Structural Characteristics of 3- and 4-Coordinate Borons from 11B MAS NMR and Single-Crystal NMR in the Nonlinear Optical Material BiB3O6

  • Kim, Woo Young;Lim, Ae Ran
    • 한국자기공명학회논문지
    • /
    • 제17권1호
    • /
    • pp.24-29
    • /
    • 2013
  • The structural characteristics of 4-coordinate $BO_4$ [B(1)] and 3-coordinate $BO_3$ [B(2)] groups in $BiB_3O_6$ were studied by $^{11}B$ magic angle spinning (MAS) and single-crystal nuclear magnetic resonance (NMR) spectroscopy. The spin-lattice relaxation time in the laboratory frame, $T_1$, for $^{11}B$ decreased slowly with increasing temperature, whereas the spin-lattice relaxation times in the rotating frame, $T_{1{\rho}}$, for B(1) and B(2), which differed from $T_1$, were nearly constant. Further, $T_{1{\rho}}$ for B(1) and B(2) showed very similar trends, although the $T_{1{\rho}}$ value of B(2) was shorter than that of B(1). The 3-coordinate $BO_3$ and 4-coordinate $BO_4$ were distinguished by $^{11}B$ MAS NMR spectrum and $T_{1{\rho}}$.

Temperature Dependent Cation Distribution in Tb2Bi1Ga1Fe4O12

  • Park, Il-Jin;Park, Chu-Sik;Kang, Kyoung-Soo;Kim, Chul-Sung
    • Journal of Magnetics
    • /
    • 제13권3호
    • /
    • pp.110-113
    • /
    • 2008
  • In this study, heavy rare earth garnet $Tb_2Bi_1Ga_1Fe_4O_{12}$ powders were fabricated by a sol-gel and vacuum annealing process. The crystal structure was found to be single-phase garnet with a space group of Ia3d. The lattice constant $a_0$ was determined to be 12.465 ${\AA}$. From the analysis of the vibrating sample magnetometer (VSM) hysteresis loop at room temperature, the saturation magnetization and coercivity of the sample are 7.64 emu/g and 229 Oe, respectively. The N$\acute{e}$el temperature($T_N$) was determined to be 525 K. The M$\ddot{o}$ssbauer spectrum of $Tb_2Bi_1Ga_1Fe_4O_{12}$ at room temperature consists of 2 sets of 6 Lorentzians, which is the pattern of single-phase garnet. From the results of the M$\ddot{o}$ssbauer spectrum at room temperature, the absorption area ratios of Fe ions on 24d and 16a sites are 74.7% and 25.3%(approximately 3:1), respectively. These results show that all of the non-magnetic Ga atoms occupy the 16a site by a vacuum annealing process. Absorption area ratios of Fe ions are dependent not only on a sintering condition but also on the temperature of the sample. It can then be interpreted that the Ga ion distribution is dependent on the temperature of the sample. The M$\ddot{o}$ssbauer measurement was carried out in order to investigate the atomic migration in $Tb_2Bi_1Ga_1Fe_4O_{12}$.