• Korean Journal of Weed Science
• /
• v.5 no.1
• /
• pp.50-55
• /
• 1985

Effects of weed removal time on maize growth and yield were evaluated in the fields dominated with Poligonum spp., Chenopodium album, Echinochloa crusgalli and Digitaria adsendens from 1982 to 1983 in Suweon. Weed removal treatments were as follows: (a) kept weedfree all season, (b) weeded at 10 day intervals after maize emergence but stopped weeding at 3,5,7,9 leaf stages, (c) weeds initially removed at 3,5,7 and 9 leaf stages and the plots then kept weed free, (d) weeds left all season. Maize kept weed free from maize emergence to 7 leaf stages showed no grain yield reduction due to competition from weeds emerging later, but weeding from emergence to 3 and 5 leaf stages reduced grain yield 46 and 44%, respectively, in 1982 and 29 and 18%, respectively, in 1983. Weeding at 3 leaf stage and thereafter did not influence grain yield but initial weedings at 5, 7 and 9 leaf stages reduced grain yield 10, 36, and 67%, respectively, in 1982 and 14,18, and 21%, respectively, in 1983. Responses of maize to weeding time in the dry matter yields were same as in the grain yields.

• Korean Journal of Weed Science
• /
• v.12 no.2
• /
• pp.124-131
• /
• 1992

Not only reducing the carry-over effects of quinclorac [3, 7-dichloro-8-quinoline carboxylic acid] used in paddy field to some following vegetable crops but also rationalizing agro-ecology conservation and farm economy, the reducing feasibility of application rates by various cropping patterns and application timing after rice seeding and transplanting. Four cropping patterns namely dry direct seeding(DDS), flooded direct seed(FDS), transplanting of 8 days old early seedlings(EST) and 25 days old machinery seedling(MST) were experimented with 7 application timings as 0, 5, 10, 15, 20, 25, 30 days after seeding/transplanting and 9 levels of application rates as 0, 75, 150, 225, 300, 375, 450, 525, and 600g ai/ha of the chemical, respectively. Within the maximum permitted limit of rice phytotoxicity, the minimum application rate of quinclorac to complete control of Echinochloa crus-galli as influenced by various cropping patterns with application timing could be evaluated as follows : A. Dry direct seeding : The minimized application rate at application timing upto 10 days after seeding (DAS) was counted 150g ai/ha, and delaying upto 15-30 DAS, the rates were increased upto 225-525g ai/ha. B. Flooded direct seeding and transplanting : The application rates were minimized 75g ai/ha at application timing upto 10 days after seeding/transplanting(DAS/T), 150g ai/haupto 15 DAS/T, and 225g ai/ha at later than 20 DAS/T, respectively.

• Current Research on Agriculture and Life Sciences
• /
• v.5
• /
• pp.119-126
• /
• 1987

This study was conducted to elucidate the most appropriate method to obtain auxotrophic mutants from Valsa ceratosperma, the causal fungus of apple canker, which may be used as a gene marker in detecting the transfer of the factors of avirulent strains to virulent strains. Among the 3 kinds of synthetic media tested, each have two formula for minimal and complete, the medium which has been used in study of Endothia parasitica (E. P medium) was turned out to be most appropriate for the growth of V. ceratosperma. A medium for single colony formation from pycnidiospore of this fungus was developed by adding 0.5% L - sorbose to the E. P minimal medium. The period of incubation in dark for preventing the photoreactivation after U. V irradiation was estimated as about 60hrs at which most of the spores become binucleate. Largest number of putative auxotrophs were obtained at about 50second of irradiation to the spores smeared on the medium for single colony formation, at which the survival rate of spores was 5 to 6 percent. With these method developed in this experiment, 161 isolates of putative auxotrophs were detected among which the nutrient requirement for 10 isolates were determined. Five out of 10 mutants were still virulent to apple tree and all but one could not sporulate.

• Journal of dental hygiene science
• /
• v.9 no.2
• /
• pp.169-179
• /
• 2009

This study aims to present a fundamental data base to figure out the mental and the physical conditions that the dental technicians are facing and ultimately to develop a health care program to deal with their health related problems. To this end, we took an analysis on the health status among the subjects of 895 dental technicians currently working at the dental lab around the nation from January 15 to March 31, 2009 by way or Todai Health Index(THI). Of the average scale point in accordance with 12 scale scores of the physical and the mental subjective symptom, the results revealed that the physical appeals (21.10) were higher than the mental appeals (18.49) and the multiple subjective symptom was marked as 38.44 followed by the mental irritability (25.92). In gender differences, the females proved to be higher than the males in both physical appeals and mental appeals while the physical appeals were dominant in both genders. The physical appeals were higher than the mental appeals with regard to the general characteristics. In the case or the group or age twenties as shown in the physical and mental average scale point, the other groups showed 21.55% of the physical appeals among the married whereas the mental appeals showed the highest point as 18.70 in the unmarried group. In job position, the other groups marked the highest, in working condition, below average group marked the highest, in frequency of break time, none group marked the highest. We drew a conclusion form this study that the dental technicians gained the higher points in the item or the multiple subjective symptom, the menial irritability, and the irregular life. More research on th is phenomena should be followed along with the development of various and practical health care programs to promote the health or dental technicians.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.4
• /
• pp.114-125
• /
• 2019

Off-Site Construction (OSC) is a new construction method based on factory production. OSC (Off-Site Construction) is a new construction method based on factory production. Researches such as OSC-related design and production standardization, transport methods are actively conducted in the U.S., UK and other parts of the world as this new method has an edge over existing methods in terms of productivity, economy and quality. As the emergence of this new area requires reasonable management, an analysis of the scope of construction project management is required accordingly. Therefore, this research analyzed the study trends and relationships at the CM/PM range's "Operation level" to identify areas of study, relationship between studies and deficiencies in current research. This study carried out a comprehensive literature review of the OSC (CM/PM) research by analyzing 94 papers in Operation level as of September 3, 2018, and the analysis results are as follows. (1) Working stage level researches have been increasing rapidly since 2006. (2) Non-volumetric type is contributing most significantly at work stage level. In the building sector, it has been identified that problems such as residential: living, quality issues, non-residential: economic difficulties, factory: productivity problems have been addressed. (4) The Non-volumetric pre-assembly type dealt with the economic feasibility of residential and non-residential buildings, whereas the modular type was studied in regards to assembly quality. (5) From 2006, project management areas (e.g., quality, human resources, risks) have been expanded. It is expected that this research will help find new areas of research for OSC. If the analysis is carried out to the level of the industrial, corporate and project phases in the future, it is deemed that the overall research flow and area of the OSC industry can be identified.

• Journal of the Geological Society of Korea
• /
• v.54 no.5
• /
• pp.489-499
• /
• 2018

A series of geological events such as the formation of the Antarctic continental ice sheets, the changes in ocean circulation and a mass extinction after the onset of Oligocene has been studied as major concerns by various researches. However, paleoclimatic and paleoceanographic changes during the most period of Oligocene since the Eocene-Oligocene transition (EOT) still remains unclear. Especially, although the late Oligocene warming (LOW) has been assessed as the largest period in the paleoceanographic changes, the detailed understanding on the changed components is very low. The purpose of this study is the reconstruction of the paleoceanographic history during the late Oligocene using core sediments from IODP Expedition 342 Site U1406 performed in J-Anomaly Ridge in North Atlantic. Because North Atlantic deep water (NADW) has flowed southward through the study area since the early Oligocene, this area has been considered to an important location for studies on the changes of NADW. The core sediment analyzed in this study were deposited from about 26.0 to 26.5 Ma as evidenced by both of onboard and shore-based paleomagnetic data, and this is corresponded to the earliest period of LOW. The sediment profile can be divided into three Units (Unit 1, 2 & 3) based on the changes in both of total number and test size of Oridorsalis umbonatus as well as grain size data of clastic sediments. Unit 2 represents largest values in these three data. Because the total number, test size of O. umbonatus and grain size can be proxy records on the oxygen concentration and circulation intensity of deep water, we interpreted that Unit 2 had been deposited during the period of relatively strengthened NADW. Previous Cibicidoides spp. stable isotope results from the low latitude region of the North Atlantic also support our interpretation that is the intensified formation of NADW during the identical period. In conclusion, our results present a new evidence for the previous ideas that the causes on LOW are directly related to the changes in NADW.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.1
• /
• pp.126-147
• /
• 2018

The compositions and iconographies of the three Illustrations of the Sixteen Contemplations produced in the early Joseon Dynasty effectively manifest the transitional period of Joseon society as well as the Joseon people's perception of the Pure Land. In particular, the painting at titled Chionji (知恩寺) dated 1435 and another painting at titled Chion' in (知恩院) from 1465, which were commissioned by the Joseon royal family and high-ranking monk, embody the Pure Land faith of the Tiantai School of Buddhism (天台宗) which thrived during the late Goryeo period. This indicates that the Joseon royal court continued to favor the Pure Land faith that emphasized salvation through "self-power" (自力), which was popular among both the royal family and the nobility of Goryeo. On the other hand, in the painting at titled $H{\bar{o}}rinji$ (法輪寺), which is presumed to have been made in the sixteenth century, the compositions and iconographies shown in late Goryeo examples of the Illustrations of the Sixteen Contemplations are disassembled. Moreover, a new iconographical motif, i.e. "welcoming the dragon boat" (龍船接引), emerged with this painting. This motif symbolizes the idea that the souls of the deceased are guided by Amitabha Buddha to rebirth in the Pure Land of Extreme Bliss, which is based on the "other-power" of the Pure Land faith that emphasizes the power of Amitabha Buddha in attaining salvation rather than the educational "self-power" of the Pure Land faith. The emergence of this motif demonstrates the transformation of the Pure Land belief into a faith that relied on the "other-power" of Amitabha in Joseon's Confucian society.

• Journal of Korea Port Economic Association
• /
• v.38 no.1
• /
• pp.129-142
• /
• 2022

In the past, interest in air pollution was concentrated on greenhouse gases, but in recent years, interest in fine dust has been increasing. The media and environmental organizations continue to emphasize air pollution caused by fine dust. The awareness of fine dust is increasing, and air pollution generated at ports is analyzed to be serious as a domestic factor excluding foreign inflows. Recognizing this, in order to reduce air pollution generated at ports, special laws on improving air quality, such as port areas, have been enacted in Korea, and attempts are being made to curb air pollution caused by ports. In this law, it is a policy that regulates air pollutants generated not only by ships but also throughout ports such as vehicles and unloading machines, and representative are ECA, VSR, and AMP. This study attempted to analyze the effects of these eco-friendly policies at Incheon Port. First of all, a study was conducted to calculate emissions assuming that there was no policy, analyze each policy, and finally calculate and compare actual emissions reflecting all policies. The methodology presented by the European Environmental Administration and the U.S. Environmental Protection Agency was used, and pollutants to be analyzed were analyzed for sulfur oxides (SO_X), carbon monoxide (CO), nitrogen oxides (NO_X), total floating substances (TSP), fine dust and ultrafine dust (PM₁₀, PM_2.5) and ammonia (NH₃). As a result of the analysis, it was analyzed that the actual emission reflecting all policies was about 4,097 tons/year, which had an emission reduction effect of about 760 tons/year compared to about 4,857 tons/year when the policy was not reflected. When the effects of each policy were analyzed individually, it was found that ECA 4,111 tons/year, VSR 4,854 tons/year, and AMP 4,843 tons of air pollutant emissions occurred The results of this study can be used as basic data and evidence for policy establishment related to the atmospheric environment at Incheon Port.

• Economic Analysis
• /
• v.26 no.1
• /
• pp.1-33
• /
• 2020

Recent discussions about a minimum wage increase (MWI) and its influence on the economy have mainly focused on the quantitative aspects, such as labor costs and employment. However, concerning the qualitative aspects, an MWI could have positive effects by enhancing firm productivity and crowding out marginal firms from the market. These positive effects of an MWI can offset, to some extent, its potential negative effects - increasing labor costs and decreasing employment, among others. In this regard we empirically examine the impact of an MWI on firm productivity (total factor productivity). Using firm level panel data from the manufacturing industry in Korea, we calculate the influence rates of a minimum wage by sector and by firm size (number of workers), and analyze its effects on firm productivity. In particular, the production functions of the firms are estimated by taking into account endogeneity among the input factors, in order to resolve the drawbacks of existing studies - underestimating the capital factor coefficient and overestimating the labor factor coefficient. This study finds that the influences of an MWI on wages, employment, and productivity are substantially different across sectors and firm sizes. While an MWI has shown to have positive influences on productivity growth in the manufacturing industry as a whole, each sector demonstrates a different direction of effect, and the degree of productivity change also varies by sector. The impacts of an MWI on firm productivity are generally estimated to be more negative for smaller firms, but in some sectors the effects are found to be positive. In addition, the wage increases resulting from an MWI seem to cause a productivity enhancement across all sectors in the manufacturing industry. The policy implications of this study are as follows. Considering the empirical findings that an MWI causes an increase in productivity in many sectors of the manufacturing industry, it would be desirable to take into consideration not only the negative side effects but also the positive effects of an MWI when designing any future minimum wage policy. Moreover, in spite of there being a uniform minimum wage, this study finds that the diverse influence rates of a minimum wage across firms have different impacts on wages, employment, and productivity across sectors or firm size. This finding could be conducive to discussions about differentiation among minimum wage schemes by sector or firm size.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.1
• /
• pp.17-25
• /
• 2022

This study was carried out the estimation on consumption patterns and consciousness of domestic forage for improvement of the quality of domestic forage. Although the cultivated area in South Korea of forage has increased significantly compared to the past, the self-sufficiency rate of domestic forage has increased to around 80% since 2010. Also, livestock farmers prefer to use import forage than domestic due to convenience of use. In Korean beef farms, the ratio of import to domestic forage was higher in domestic forage (import forage 3 : domestic forage 7). In the method of securing domestic forage, purchase of forage (55.6%) was higher than self-cultivation of forage (44.4%). The ratio of use by bailing type was shown in the order of rice staw rice straw (50.5%), domestic hay (15%), imported hay (12.5%), and total mixed ratio (10.7%). The preference of forage was in the order of amount of foreign matter, moisture content, price, feed value in Korean native cattle farm. The result of satisfaction with domestic and import forage showed that the satisfaction of domestic forage price was higher than import forage, while the moisture content and foreign matter of forage were lower than import forage. In addition, in the results of the satisfaction and importance of domestic roughage compared to imported roughage, satisfaction with imported roughage was generally high in all items except for price. As a result, in order to improve the satisfaction of domestic forage in Korean native cattle farm, it is necessary to minimize foreign matter in forage and increase hay production for moisture content uniform in forage.