• Applied Chemistry for Engineering
• /
• v.32 no.2
• /
• pp.197-204
• /
• 2021

This study investigated the smoke risk assessment of woods and plastics for construction materials, focusing on the smoke performance index-V (SPI-V), smoke growth index-V (SGI-V), and smoke risk index-VI (SRI-VI) according to a newly designed methodology. Spruce, Lauan, polymethylmethacrylate (PMMA), and polycarbonate (PC) were used for test pieces. Smoke characteristics of the materials were measured using a cone calorimeter (ISO 5660-1) equipment. The smoke performance index-V calculated after the combustion reaction was found to be 1.0 to 3.4 based on PMMA. Smoke risk by smoke performance index-V was increased in the order of PC, Spruce, Lauan and PMMA. Lauan and PMMA showed similar values. The smoke growth index-V was found to be 1.0 to 9.2 based on PMMA. Smoke risk by smoke growth index-V increased in the order of PMMA, PC, Spruce, and Lauan. COpeak production rates of all specimens were measured between 0.0021 to 0.0067 g/s. In conclusion, materials with a low smoke performance index-V and a high smoke growth index-V cause a high smoke risk from fire. Therefore, it is understood that the smoke risk from fire is high. It is collectively summarized by the smoke risk index-VI.

• Korean Journal of Poultry Science
• /
• v.16 no.4
• /
• pp.239-252
• /
• 1989

The present study was carried out to investigate the improvement of major production traits with the published data of twenty-two years'random sample tests held in Korea from 1966 to 1988. Eight traits-roaring viability, laying viability, age of sexual maturity, hen day egg production, hen-housed egg production, egg weight, feed requirement, 500 days body weight-were dealt with in this study. The results obtained in this study are summerized as follows； 1. Total mean value for rearing viability was 99.4% in 1980s. Mean value for rearing viability of colored hen was 99.5% and white hen was 99.06% in 1980s. Mean value for laying viability was increased by 0.98%, 0.86% and 0.86% per year in pool data, white hen and colored hen, respectively. 2, Age of sexual maturity was decreased from 171.1 day to 160.8 day in pool data during 1960s- 1910s but increased to 162.4 day in 1980s； and decreased from 160.5 day to 1595 nay in white hen but increased from 163.7 day to 166.1 day in colored hen during 1970s-1980s. 3. Mean values for hen-day egg production were increased by 0.96%, 1.09% and 0.63% per year in pool data, colored hen and white hen, respectively. 4. Mean values for hen housed egg production were increased by 45, 5.37 and 4.23 per year in pool data, colored hen and white hen, respectively. 5. Egg weight were improved by 0.22g and 0.25g per year in pool data and colored hen but decreased by 0.03g in white hen. 6. feed requirement were improved by 0.04, 0.05 and 0.1 per year in pool data, white hen and colored hen, respectively. 7. 500 days body weights were increased by 0.38g per year in pool data but decreased by 14.95g and 10.37g in colored hen and white hen, respectively. 8. Estimate of correlation coefficient between age of sexual maturity and other factors such as hen day egg production. hen housed egg production, egg weight and 500 days body weight were -0.4512, -0.2876, -0.4376 and 0.2045 in pool data； -0.358, -0.1530 0.3475 and 0.1208 in white hen； 0.0989, 0.1181, 0.2885 and 0.2248 in colored hen, respectively. Estimates of correlation coefficient between hen day egg production and egg weight were 0.6233, -0.2259 and 0.2973 in Pool data, white hen and colored hen； between hen day egg production and 500 days body weight, 0.2417, 0.0774, -0.4787 ： between hen-housed egg production and egg weight, 0.6171, -0.2706, 0.4579： between hen housed egg production and 500 days body weight, 0.3082, -0.0792, -0.3368： between egg weight and 500 days body weight, 0.2742, 0.2205, 0.1354, respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.231-232
• /
• 2012

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.123-123
• /
• 2017

식물공장 내 작물의 생육은 제공되는 인공광원의 광원 및 광질에 영향을 받으며, 광흡수 파장에 따라 다르다. 또한 광합성에 효과적인 형태의 빛의 계속적인 빛의 조사보다는 광 펄스를 조절하여 공급하여 준다면 더욱더 효과적인 생육 환경을 제공해 줄 수 있다. 식물의 최적 생장을 위해 특정 파장대의 빛을 선택적으로 조사할 수 있는 LED특성을 사용하여 UV광원을 포함한 인공광원의 펄스폭 변조에 따른 적치마 상추의 생육특성을 알아보고자 하였다. 광환경은 Red(660 nm), Blue(450 nm), UV(395 nm) LED를 8:1:1 비율로 광량 $160{\mu}mol{\cdot}m^2{\cdot}s^{-1}$, 주파수 1.25, 2.5, 3.75, 5.0 kHz로 조사하여 주었으며, 온도 $20{\sim}23^{\circ}C$, 습도 50~60%, $CO_2$농도 1,000 ppm으로 조성하여 주었다. 아시아종묘 적치마상추를 파종 후 18일 째 되는날 정식, 정식 후 14일 28일 째 되는날 SPAD, 지상부 지하부의 생체중 및 건물중, 엽폭, 엽장을 측정하였으며, 측정한 엽폭과 엽장을 이용하여 엽형지수 산출, 지상부 지하부 생체중 값을 이용하여 S/R율을 산출하였다. SPAD 측정결과 생육시기가 증가할수록 SPAD함량은 감소하였으며, 1.25와 2.5 kHz에서 생육 시기 증가에 대한 SPAD함량 감소가 컸고, 3.75와 5.0 kHz의 경우 SPAD함량의 감소량은 작았다. 지상부 생체중은 3.75 kHz에서 121.51 g으로 가장 높은 값을 나타냈으며, 2.5, 1.75, 5.0 kHz 순으로 높은 값을 나타났다. 지하부 생체중의 경우 3.75 kHz에서 31.31 g으로 가장 높은 값을 나타냈으며 2.5, 5.0, 1.25 kHz 순으로 높게 나타났다. 엽형지수는 생육 시기가 증가에 따라 감소하는 것으로 나타났으며, 1.75, 2.5, 5.0, 3.75 kHz 순으로 크게 나타났다. 지상부 건물중 측정결과는 지상부 생체중 결과와, 지하부 건물중의 측정결과는 지하부 생체중 결과와 동일하였다. S/R율은 1.75 kHz를 제외하고 생육시기가 증가할수록 S/R율은 감소하는 것으로 나타났으며, 주파수가 높아질수록 S/R율은 감소하는 것으로 나타났다. 엽형지수는 엽폭/엽장으로 엽형지수를 산출한 결과로 값이 작을수록 엽폭이 넓은 형태를 의미하며, 생체중값이 가장 크게 나타났던 3.75 kHz에서 엽형지수의 값이 가장 낮게 나타났으며 3.75 kHz를 제외하고 주파수가 높을수록 엽형지수의 값이 낮게 나타났다. 이에 주파수에 따른 적상추의 생육은 3.75 kHz에서 가장 좋은 것으로 판단할 수 있었다.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.2
• /
• pp.161-170
• /
• 2002

This paper describes a systematic way of simultaneously identifying the ambient pore pressure and the rigidity index $(=G/s_u)$ of soil by applying an optimization technique to the early part of piezocone dissipation test result. An analytical solution developed by Randolph & Wroth(1979) was implemented in normalized from to express the build-up and dissipation of excess pore pressures around a piezocone as a function of the rigidity index. An ambient pore pressure and optimal rigidity index were determined by minimizing the differences between theoretical and measured excess pore pressure curves using optimization technique. The effectiveness of the proposed back-analysis method was examined against the well-documented performance of piezocone dissipation tests(Tanaka & Sakagami, 1989), from the viewpoints of proper determination of selected target parameters and saving of test duration. It is shown that the proposed back-analysis method can evaluate properly the ambient pore pressure and the rigidity index by using only the early phase of the dissipation test data. Also, it is shown that the proposed back-analysis method permits the horizontal coefficient of consolidation to be identified rationally. Consideration for strain level of back-analyzed rigidity index shows that it corresponds to at least intermediate to large strain level.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.21-30
• /
• 2003

본 연구에서는 변조지수 M이 큰 영역에서는 고조파 스펙트럼의 광대역화 효과가 저하되는 2상 랜덤 중앙 정렬 변조기법 (Random Centered Distribution PWM : RCD)기법의 문제점을 해결하고자 멀티 영벡터 2상 RCD (Multi Zero Vector RCD : MZRCD) 변조기법을 제안하였다. 제안된 2상 MZRCD기법은 변조지수 M=0.7을 기준으로 하여 M이 0.7보다 큰 영역에서는 영벡터를 V(111)로 선택하고, 0.7보다 작은 영역에서는 V(000)을 선택한다. 제안된 방법을 유도모터 구동시스템에 적용해 본 결과, M이 0.7이상인 영역에서도 모터의 전압/전류 및 소음 스펙트럼의 광대역화 특성이 종전의 방법에 비하여 우수함을 확인할 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1575-1577
• /
• 2000

345kV급 210KN 초고압 현수애자의 개발 시험 결과, 과전파괴하중시험에서 품질관리지수가 3.0 이상인 11.2였으며, 유중파괴전압시험에서는 기준치보다 40% 정도 높은 값을 보였다. 그리고 72kA$\cdot$ Cycle $\pm$10% 조건의 power arc시험에 파괴없이 만족하였으며, 경년변화시험 후의 확인시험에서도 품질관리지수가 11.47로 높게 나타났다. 애자련의 피로시험 및 진동피로시험 후의 하중확인시험에서도 기준치보다 10% 이상의 값을 보였다. 전체적인 시험조건에서 경년변화시험의 조건이 가장 가혹한 것으로 나타났다.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.1
• /
• pp.45-54
• /
• 2017

The characteristics of the rock cleavage in Jurassic Geochang granite were analysed using the distribution of microcrack lengths and spacings. The phases of distribution of the above lengths and spacings were derived from the enlarged photomicrographs(${\times}6.7$) of the thin section. First, the length and spacing-cumulative diagrams for the six directions of rock cleavages were arranged in increasing order($H2{\rightarrow}R1$) on the density(${\rho}$) of microcrack length. The various parameters were extracted through the combination of the above two types of diagrams. The discrimination factors representing the three quarrying planes and three rock cleavages were acquired through the mutual contrast between the values of parameters. The analysis results of the research are summarized as follows. The evaluation for the six directions of rock cleavages was performed using the parameters such as (1) intersection angle(${\alpha}-{\beta}$) and (2) exponent difference(${\lambda}_S-{\lambda}_L$) between two exponential straight lines related to spacing(${\alpha}$, ${\lambda}_S$) and length(${\beta}$, ${\lambda}_L$). The values of parameters(1 and 2) are in order of H(hardway, (H1 + H2)/2) < G(grain, (G1 + G2)/2) < R(rift, (R1 + R2)/2). On the contrary, the values of the above two parameters for three planes are in order of R < G < H. Meanwhile, the direction of convergence between two exponential straight lines was derived. The above direction is compliant to arrangement of the line os' centering around the line ol. The above two lines converge in the direction of the Y-axis when the line ol and line os' occupy the upper region on the left and the lower region on the right, respectively(R-type). On the contrary, the above two lines converge in the direction of the X-axis when the order of arrangement between line ol and line os' is reversed(H-type). Especially, the positive(+) or negative(-) value of intersection angle(${\alpha}-{\beta}$) is determined by the arrangement of two vertical lines. This type of correlation analysis is useful for evaluating the relative strength of rock cleavage and discriminating three quarrying planes.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.6
• /
• pp.396-401
• /
• 2014

Nanomaterials have been widely used in many fields. This study investigates the effects of metal oxide nanoparticles (CuO, NiO, $TiO_2$, $Fe_2O_3$, $Co_3O_4$, ZnO) on germination and germination index (G.I.) of seeds, Lactuca and Raphanus. Under aqueous exposure, CuO on Lactuca shows the most significant impacts on activities compared to others, showing $EC_{50s}$ for germination and G.I. as 0.46 mg/L and 0.37%, respectively. The effects of nanoparticle phytotoxicity on seed Lactuca was much higher than that of Raphanus. In general, the toxicities on seed germination and germination index were as following orders : CuO > ZnO > NiO ${\gg}$ $TiO_2$, $Fe_2O_3$, $Co_3O_4$. No measurable inhibition was observed at 1,000 mg/L (maximum exposure concentration) of $TiO_2$, $Fe_2O_3$, $Co_3O_4$.

• Korean Journal of Environmental Biology
• /
• v.39 no.1
• /
• pp.46-54
• /
• 2021

The seasonal and vertical biomass of marine forest seaweeds were examined to select a suitable species at 12 sites of the South Sea in Korea between 2018 and 2019. The Habitat Suitability Index (HSI) was also calculated in terms of biomass for six species (three kelp and three Sargassum species). A total of 16 marine forest-forming species including four kelp and 12 Sargassum species were observed at the 12 sites. The average annual seaweed biomass by season and depth ranged from 843.73-2,925.85 g wet wt. m^-2 at the eastern South Sea and from 343.87-4,580.10 g wet wt. m^-2 at the western South Sea. In the kelp species, the Ecklonia cava biomass was predominant, followed by E. stolonifera. The macroalgal species with the greatest biomass was Sargassum macrocarpum, followed by S. horneri. The HSI values of E. stolonifera were between 0.76-1.0 at eight sites and those of E. cava were 0.58-0.92 at four sites, indicating that E. stolonifera was more suitable than E. cava. In the HSI values of the Sargassum species, S. horneri ranged between 0.84-1.0 at all 12 sites and the S. macrocarpum values were between 0.68-0.99. The results indicate that E. cava and S. macrocarpum were the most suitable for the marine forest construction in terms of the seaweed biomass, and E. stolonifera and S. horneri in terms of the HSI values. Thus, we suggest that seaweed biomass and HSI values should be considered when choosing suitable forest-forming species.