• Title/Summary/Keyword: $fs_2$

Search Result 698, Processing Time 0.028 seconds

Lipids and Fatty Acid Composition of Free and Bound Lipids in Barley Grain (보리의 유리(遊離) 및 결합지질(結合脂質)의 조성에 관한 연구)

  • Kim, Hyun-Ku;Shin, Hyo-Sun
    • Korean Journal of Food Science and Technology
    • /
    • v.14 no.4
    • /
    • pp.382-387
    • /
    • 1982
  • Lipids and fatty acid composition of free and bound lipids isolated from four barley varieties were studied. The average content of purified free and bound lipids were 1.57% and 0.48%, respectively. The average contents of neutral lipids, glycolipids and phospholipids in the free and bound lipids contain 81.1% and 16.4%, 11.4%, and 6.8%, 6.7% and 75.5%, respectively. Among the neutral lipids in both free and bound lipids, triglycerides were the predominant with free fatty acids, monoglycerides, diglycerides, free sterol esters being present as minor components. Linoleic, oleic, palmitic and linolenic acid were the principal fatty acids in both free and bound lipids. And fatty acid composition of lipid classes in free and bound lipids were determined.

  • PDF

Fabrication of a micromachined ceramic thin-film type pressure sensor for high overpressure tolerance and Its characteristics (과부하 방지용 마이크로머시닝 세라믹 박막형 압력센서의 제작과 그 특성)

  • Kim, Jae-Min;Chung, Gwiy-Sang
    • Journal of Sensor Science and Technology
    • /
    • v.12 no.5
    • /
    • pp.199-204
    • /
    • 2003
  • This paper describes on the fabrication and characteristics of a ceramic thin-film pressure sensor based on Ta-N strain-gauges for harsh environment applications. The Ta-N thin-film strain-gauges are sputter-deposited onto a micromachined Si diaphragms with buried cavity for overpressure protectors. The proposed device takes advantages of the good mechanical properties of single-crystalline Si as diaphragms fabricated by SDB and electrochemical etch-stop technology, and in order to extend the operating temperature range, it incorporates relatively the high resistance, stability and gauge factor of Ta-N thin-films. The fabricated pressure sensor presents a low temperature coefficient of resistance, high-sensitivity, low non-linearity and excellent temperature stability. The sensitivity is $1.097-1.21\;mV/V{\codt}kgf/cm^2$ in the temperature range of $25-200^{\circ}C$ and the maximum non-linearity is 0.43%FS.

Analysis of the Effect of Tree Roots on Soil Reinforcement Considering Its Spatial Distribution (뿌리의 공간분포를 고려한 수목 뿌리의 토양보강 효과에 대한 분석)

  • Kim, Dongyeob;Lee, Sang Ho;Im, Sangjun
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.14 no.4
    • /
    • pp.41-54
    • /
    • 2011
  • Tree roots can enhance soil shear strength and slope stability. However, there has been a limited study about root reinforcement of major tree species in Korea because of some experimental difficulties. Thus, this study was conducted to analyze the performance of Japanese larch (Larix kaempferi) and Korean pine (Pinus koraiensis) which are two common plantation species in Korea. Profile wall method was used to measure the spatial distribution of root system and its diameter within 15 soil walls of Japanese larch stand and 13 soil walls of Korean pine stand in Taehwa University Forest, Seoul National University, Korea. Root tensile properties of each species were assessed in the laboratory, and root reinforcements were estimated by Wu model. The study observed that the number and cross-sectional area (CSA) of root in both species could tend to decrease with soil depth. Especially, CSA were well-fitted to exponential functions of soil depth. Mean root area ratios (RAR) were 0.03% and 0.10% for Japanese larch and Korean pine, respectively. Estimated root reinforcement from Wu model were, on the average, 4.04 kPa for Japanese larch and 12.26 kPa for Korean pine. Overall, it was concluded that root reinforcement increased the factor of safety (Fs) of slope for small-scale landslide as the result of two-dimensional (2-D) infinite slope stability analysis considering vegetation effects.

Identification of Fusobacterium nucleatum isolated from Korean by F. nucleatum subspecies-specific DNA probes (Dot blot hybridization법을 이용한 Fusobacterium nucleatum 아종-특이 DNA 프로브의 특이성 평가)

  • Kim, Hwa-Sook;Kook, Joong-Ki
    • Journal of Korean society of Dental Hygiene
    • /
    • v.6 no.4
    • /
    • pp.311-324
    • /
    • 2006
  • The purpose of this investigation was to evaluate of the specificity of Fusobacterium nucleatum subspecies-specific DNA probes using dot blot hybridization. To confirm whether the clinical isolates were F. nucleatum or not, 16S rDNA of them were cloned and sequenced. The sequencing data were used in homology search with database of GenBank. When the homology was above 98% compared with the nucleotide sequence of a certain bacteria, it was judged as the same species with the bacteria. 23 strains of F. nucleatum were isolates from subgingival plaque of periodontitis patient. The clinical isolates of F. nucleatum were classified into 10 groups using phylogenetic analysis of 16S rDNA sequence. F. nucleatum subspecies nucleatum-specific DNA probe Fu4(1.3 kb) reacted with genomic DNAs from 8 type strains of F. nucleatum and it reacted strongly with those from 8 clinical isolates. The Fp4(0.8 kb) reacted with F. nucleatum subsp. polymorphum ATCC 10953 and one clinical isolates. Fv35(1.9 kb) and Fs17(8.2 kb) probes reacted with genomic DNAs from F. nucleatum subsp. vincentii ATCC 49256 and F. nucleatum subsp. fusiform ATCC 51190, respectively. Our results showed that it is not enough to evaluate the specificity of F. nucleatum subspecies-specific DNA probes with only dot blot hybridization. Therefore, Southern blot analysis will be necessary to confirm the specificity of F. nucleatum subspecies-specific DNA probes.

  • PDF

Characteristics of A New Flue-cured Tobacco Mutant Line KF 8832-85 (황색종 연초 돌연변이 계통 KF8832-85의 특성)

  • 조수헌
    • Journal of the Korean Society of Tobacco Science
    • /
    • v.17 no.1
    • /
    • pp.27-32
    • /
    • 1995
  • A new flue-cured tobacco mutant line BU 8832-85 was developed at Taegu Experiment Station, Korea Ginseng and Tobacco Research Institute in 1994. KF 8832-85 was resulted from a cross of flue-cured cultivars NC 95$\times$NC 2326, and developed by a pedigree system of breeding ; initial selection was made by plant type and resistance to bacterial wilt(BW) disease(heudomonas solanaceamm) in the F2 generation under the natural field conditions infested with the pathogen. One white flowered plant was occurred by spontaneous mutation in a certain line among the F3 generatioin while the others were pink. Six plants from the seeds by selfing were selected at the field infested with the pathogen among 240 populations with white flowering in the F4, KF 8832-85 was selected based on yield and leaf quality trials among 6 lines in Fs generation. BCF 8832-85 was compared with its Parent for certain agronomic and chemical characteristics at Taegu Experiment Station in 1993 and 1994. The results showed that KF 8832-85 have white flower, the stalk height was approximately that of NC 2326 but averaged about loom taller than NC 95. It produced ground suckers as much as NC 95, and did not breakdown leaf at the same as WC 2326. KF 8832-85 have high resistance to bacterial wilt disease. Yield of KF 8832-85 was 10 and 18% higher then that of NC 2326 and WC 95, respectively. Price per Kg was equal to that of NC 2326. The contents of nicotine and reducing sugar did not differ significantly from NC 95, while total nitrogen was significantly lower than NC 95. Therefore, the new mutant line is genetically stable for agronomic and chemical characteristics and provides a source of bacterial wilt disease resistance for use in breeding resistant flue-cured cultivars. Key words : Mutant line, White flower, Spontaneous mutation.

  • PDF

Postural Stability Measures Estimated from the Center of Pressure Signal During Static Posture Maintenance (정적자세 유지시 압력중심신호를 이용한 자세안정도 지표화)

  • 차은종;김경아;이태수
    • Journal of Biomedical Engineering Research
    • /
    • v.20 no.5
    • /
    • pp.559-566
    • /
    • 1999
  • 환자의 기능평가를 위하여 중요한 자세균형의 유지는 압력중심(COP) 의 동요 신호를 직접 연속적으로 계측함으로써 가능하다. COP 신호로부터 다양한 종류의 자세안정도지표를 산출할 수 있으나 임상적으로 유용한 최소한의 지표종류로는 규명된 바 없다. 이에 본 연구에서는 인체가 서있는 상태의 정적자세를 유지할 때 압력중심 신호로부터 자세안정도지표를 산출하여 분석함으로써 임상적 유용성이 가장 큰 지표의 종류를 결정하고자 하였다. 양발을 편안히 벌리거나 (FS), 모두 모으거나(FT), 한쪽발 만으로(RL, LL)서있는 자세에 대해서 양쪽 눈을 뜨거나(EO) 감은(EC)8가지 정적자세를 취하며 30초간 자세균형을 유지시켰다. 자세형태에 따른 안정도의 척도로서 신체가 지면을 차지하는 면적(S)을 사용하였다. 자세안정도지표로서 1)position deviation, 2) position turn 3) velocity의 3가지로 분류할 수 있는 18가지 지표를 설정하였다. 피검자는 20, 30, 40 ,50 대 정상인을 연령대 별로 각각 남·녀 5명씩 고르게 총 40명을 선정하여 실험하였다. 자세안정도지표 모두가 S와 비교적 높은 유의한 상관관계를 보인 바 인을 연령대 별로 각각 남·녀 5명씩 고르게 총 40명을 선정하여 실험하였다. 자세안정도지표 모두가 S와 비교적 높은 유의한 상관관계를 보인바 (상관계수=0.6∼0.8, P<0.0001), S가 자세형태를 정량화 할 수 있음을 입증하였다. 모든 지표들에 있어서 시각의 영향이 뚜렷하였으며 특히 자세가 불안해질수록 상대적으로 시각의 영향이 두드러졌다. 그러나 시각의 영향의 지표들간의 차이는 없었다. 반면 노화(연령증가)에 따른 안정도지표의 변화는 미미하였으며 위의 3가지 안정도지표분류 중 position deviation 지표만이 통계적으로 유의한(P<0.05) 상관관계를 보였다. 따라서 정적자세유지시 안정도지표로는 position deviation 지표들이 가장 예민함을 알 수 있었다. 그러나 position deviation 지표들과 연령과의 상관계수는 0.5이하로서 매우 느슨한 상관관계를 보였으며, 연령증가에 따른 자제불안정도의 증가도 매우 작아서 그 임상적 응용가능성은 의문시되었다. 또한 위에서 제시한 3가지의 분류의 지표중 position turn 과 velocity 지표의 의미에 관해서는 향후 심층적인 연구가 필요한 것으로 판단되었다.

  • PDF

Development of Suspended Particulate Matter Algorithms for Ocean Color Remote Sensing

  • Ahn, Yu-Hwan;Moon, Jeong-Eun;Gallegos, Sonia
    • Korean Journal of Remote Sensing
    • /
    • v.17 no.4
    • /
    • pp.285-295
    • /
    • 2001
  • We developed a CASE-II water model that will enable the simulation of remote sensing reflectance($R_{rs}$) at the coastal waters for the retrieval of suspended sediments (SS) concentrations from satellite imagery. The model has six components which are: water, chlorophyll, dissolved organic matter (DOM), non-chlorophyllous particles (NC), heterotrophic microorganisms and an unknown component, possibly represented by bubbles or other particulates unrelated to the five first components. We measured $R_{rs}$, concentration of SS and chlorophyll, and absorption of DOM during our field campaigns in Korea. In addition, we generated $R_{rs}$ from different concentrations of SS and chlorophyll, and various absorptions of DOM by random number functions to create a large database to test the model. We assimilated both the computer generated parameters as well as the in-situ measurements in order to reconstruct the reflectance spectra. We validated the model by comparing model-reconstructed spectra with observed spectra. The estimated $R_{rs}$ spectra were used to (1) evaluate the performance of four wavelengths and wavelengths ratios for accurate retrieval of SS. 2) identify the optimum band for SS retrieval, and 3) assess the influence of the SS on the chlorophyll algorithm. The results indicate that single bands at longer wavelengths in visible better results than commonly used channel ratios. The wavelength of 625nm is suggested as a new and optimal wavelength for SS retrieval. Because this wavelength is not available from SeaWiFS, 555nm is offered as an alternative. The presence of SS in coastal areas can lead to overestimation chlorophyll concentrations greater than 20-500%.

Fabrication of Transient Absorption Spectroscopic System and Measurement of Transient Absorption Changes of DDI (순간흡수 분광학 측정장치 구성 및 DDI의 순간흡수율 변화 측정)

  • Seo, Jung-Chul;Lee, Min-Yung;Kim, Dong-Ho;Jeong, Hong-Sik;Park, Seung-Han;Kim, Ung
    • Korean Journal of Optics and Photonics
    • /
    • v.2 no.4
    • /
    • pp.209-213
    • /
    • 1991
  • Recently, the developments in generating and amplifying ultrashort optical pulses $(ps=10^{-12}s or fs=10^{-15}s)$ have imposed on great advances in the time-resolved laser spectroscopy. Especially, the transient absorption spectroscopy has a wide application range and the main idea of this technique is pump & probe method. After the pump pulse makes the material an excited or a transient states, the probe pulse is sent through the material to measure the absorbance change due to the transient states. Here, if the absorbance change was measured by the time delay between pump & probe pulses, the dynamic information of the excited or the transient states (the transient abnsorption changes by time & wavelength) can be obtained. At our laboratory, the ultrashort optic1 pulse (

  • PDF

Pharmacokinetics and Pharmacodynamics of Pimobendan-Pentoxifylline Liquid Mixture After Oral Administration in Dogs

  • Ro, Woong-bin;Song, Doo-won;Kim, Ki-hun;Jeong, Sang-hee;Kang, Min-hee
    • Journal of Veterinary Clinics
    • /
    • v.36 no.3
    • /
    • pp.159-165
    • /
    • 2019
  • Pimobendan is an inodilator used to treat canine heart failure, and pentoxifylline is reported to be beneficial for microcirculation and heart disease. The purpose of this study was to evaluate the pharmacokinetic and pharmacodynamic profiles of a novel pimobendan-pentoxifylline liquid mixture after oral administration to dogs. Eight healthy Beagle dogs were included in the study. The dogs were divided into the control group (orally administered water; n = 4) and experimental group (orally administered pimobendan-pentoxifylline liquid mixture [pimobendan 0.25 mg/kg, pentoxifylline 15 mg/kg]; n = 4). Plasma samples were obtained and echocardiographic indices were measured for 24 hours after administration. The concentrations of pimobendan and pentoxifylline were quantified by using a liquid chromatography-mass spectrometer (LC-MS). The elimination half-life ($T_{1/2}$) was $32.96{\pm}9.80mins$ for pimobendan and $29.49{\pm}6.67mins$ for pentoxifylline. The time to reach maximum concentration ($T_{max}$) were $52.50{\pm}31.22mins$ for pimobendan and $41.25{\pm}18.87mins$ for pentoxifylline. The maximum blood concentration ($C_{max}$) was $96.92{\pm}75.64ng/mL$ for pimobendan and $7074.07{\pm}3261.1ng/mL$ for pentoxifylline. Of the echocardiographic indices, fractional shortening (FS) and left ventricular internal diameter at end systole (LVIDs) were significantly altered at 1-3 hours after the administration of pimobendan-pentoxifylline liquid mixture. The pimobendan-pentoxifylline liquid mixture was well tolerated by the dogs, with no adverse effects observed during the study.

Development of the Command and Data Handling System and Flight Software of BITSE

  • Park, Jongyeob;Baek, Ji-Hye;Jang, Bi-ho;Choi, Seonghwan;Kim, Jihun;Yang, Heesu;Kim, Jinhyun;Kim, Yeon-Han;Cho, Kyung-Suk;Swinski, Joseph-Paul A.;Nguyen, Hanson;Newmark, Jeffrey S.;Gopalswamy, Natchumuthuk
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.44 no.2
    • /
    • pp.57.4-57.4
    • /
    • 2019
  • BITSE is a project of balloon-borne experiments for a next-generation solar coronagraph developed by a collaboration with KASI and NASA. The coronagraph is built to observe the linearly polarized brightness of solar corona with a polarization camera, a filter wheel, and an aperture door. For the observation, the coronagraph is supported by the power distribution unit (PDU), a pointing system WASP (Wallops Arc-Second Pointer), telemetry & telecommand system SIP (Support Instrument Package) which are developed at NASA's Goddard Space Flight Center, Wallops Flight Facility, and Columbia Scientific Balloon Facility. The BITSE Command and Data Handling (C&DH) system used a cost-off-the-shelf electronics to process all data sent and received by the coronagraph, including the support system operation by RS232/422, USB3, Ethernet, and digital and analog signals. The flight software is developed using the core Flight System (cFS) which is a reusable software framework and set of reusable software applications which take advantage of a rich heritage of successful space mission of NASA. The flight software can process encoding and decoding data, control the subsystems, and provide observation autonomy. We developed a python-based testing framework to improve software reliability. The flight software development is one of the crucial contributions of KASI and an important milestone for the next project which is developing a solar coronagraph to be installed at International Space Station.

  • PDF