• Geomechanics and Engineering
• /
• v.9 no.4
• /
• pp.513-530
• /
• 2015

Commonly, the base stability of sheeted excavation pits against seepage failure by heave is evaluated by using two-dimensional groundwater flow models and Terzaghi's failure criterion. The objective of the present study is to investigate the effect of three-dimensional groundwater flow on the heave for sheeted excavation pits with various dimensions. For this purpose, the steady-state groundwater flow analyses are performed by using the finite element program ABAQUS 6.12. It has been shown that, in homogeneous soils depending on the ratio of half of excavation width to embedment depth b/D, the ratio of safety factor obtained from 3D analyses to that obtained from 2D analyses $FS_{(3D)}/FS_{(2D)}$ can reach up to 1.56 and 1.34 for square and circular shaped excavations, respectively. As failure body, both an infinitesimal soil column adjacent to the wall (Baumgart & Davidenkoff's criterion) and a three-dimensional failure body with the width suggested by Terzaghi for two-dimensional cases are used. It has been shown that the ratio of $FS_{(Terzaghi)}/FS_{(Davidenkoff)}$ varies between 0.75 and 0.94 depending on the ratio of b/D. Additionally, the effects of model size, the shape of excavation pit and anisotropic permeability on the heave are studied. Finally, the problem is investigated for excavation pits in stratified soils, and important points are emphasized.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.1
• /
• pp.27-33
• /
• 2001

SDD(Secchi disk depth) algorithm were composed of SeaWiFS bands combination using in-water optical data sets obtained Lake Sihwa, Kyungki Bay, Chunsu Bay, and Chinhae Bay. SDD algorithm were compared with in-situ data. Reflectance band ratio, $R_{rs}$(490/665) had the highest correlation($R^2$=0.8188) with in-situ data. For in-water algorithm applied to satellite data, reflectance band ratios of Landsat TM data were calculated. However, the results of applied Landsat TM had the low correlation, these reason were discussed in this paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.711-713
• /
• 2017

Fiber Brag grating sensors were written in standard Ge-doped telecom optical fiber (Corning SMF-28) using an 800nm femtosecond laser and a phase mask. It were exposed to gamma-radiation up to a dose of 100 kGy to evaluate the radiation effect. The fs-FBG-2 sensor showed incomplete optical characteristics during irradiation, but the fs-FBG-1 sensor showed excellent radiation resistance with Bragg wavelength shift(BWS) of less than 10pm at a dose of 100 kGy.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.93-96
• /
• 2014

최근 기업, 학교 등에서 가상 데스크톱 환경을 구축하는 사례들이 확대되면서 보다 효율적이고 안정적인 서비스를 제공할 수 있는 적합한 스토리지 시스템 도입이 요구되고 있다. 가상 데스크톱 시스템은 대부분 가상 데스크톱의 기본 이미지를 스토리지 시스템에 저장하고 다수의 가상 데스크톱 스냅샷들이 기본 이미지를 공유하도록 함으로써 시스템 운영과 보안 그리고 자원 활용을 높이도록 구성한다. 이러한 가상 데스크톱 이미지는 파일 시스템에서 파일 기반으로 저장되고 관리된다. 따라서 파일 시스템에서 파일 기반의 스냅샷 기능이 필요하다. 하지만 일반 파일 시스템에서는 스냅샷과 같은 기능이 제공되지 않기 때문에 이미지를 QCOW2 등과 같은 파일 포맷으로 만들어서 스냅샷 기능을 사용할 수 있다. 하지만 스냅샷 기능을 수행하기 위해서는 파일 데이터를 읽고 쓰는 동작이 함께 수반되어야 하기 때문에 가상 데스크톱 성능에 커다란 영향을 미칠 수 있으며 가상 데스크톱 환경이 확장함에 따라 파일 데이터 입출력으로 인한 오버헤드로 서비스를 제공하기 어렵게 된다. VDI-FS 시스템은 가상 데스크톱 환경을 지원하기 위한 파일 시스템으로 기본 이미지와 스냅샷들 간의 메타데이터 및 데이터 공유를 제공하며 보다 효율적인 스냅샷 기능을 제공한다. 본 논문에서는 VDI-FS 시스템에 대한 소개와 스냅샷을 지원하는 방법에 대해 기술한다. 그리고 NFS에서 QCOW2 를 이용한 스냅샷을 사용했을 때와 VDI-FS 시스템에서 스냅샷을 사용했을 때와의 성능 비교를 통하여 VDI-FS 시스템의 스냅샷 기능이 우수한 성능을 보임을 제시한다.

• Current Optics and Photonics
• /
• v.6 no.4
• /
• pp.407-412
• /
• 2022

We report on a diode-laser-pumped mode-locked Yb:KGW laser system, which delivers ultrashort pulses down to 89 fs at a repetition rate of 63 MHz, with an average power of up to 5.6 W. A fiber-coupled diode laser at 981 nm, operated with a compact driver, is used to optically pump the gain crystal via an off-axis parabolic mirror. A semiconductor saturable-absorber mirror is used to initiate the pulsed operation. Laser characteristics such as the pulse duration, spectrum bandwidth, and output power are investigated by varying the intracavity dispersions via changing the number of bounces between negative-dispersive mirrors within the cavity. Short pulses with a duration of 89 fs, a center wavelength of 1,027 nm, and 3.6 W of output power are produced at a group-velocity dispersion (GVD) of -3,300 fs². As the negative GVD increases, the pulse duration lengthens but the output power at the single-pulse condition can be enhanced, reaching 5.6 W at a GVD of -6,600 fs². Because of pulse broadening at high negative GVDs, the highest peak intensity is achievable at a moderate GVD with our system.

• Korean Journal of Food Science and Technology
• /
• v.53 no.3
• /
• pp.356-363
• /
• 2021

This study investigated the quality characteristics of anchovy sauce fermented using Nuruk to maintain a unique flavor, reduce fishy smell, and improve the fermentation rate. Six kinds of fermented fish sauces, including the control, fermentation using traditional Nuruk; SH Koji (Fs-A), JJ Koji (Fs-B), GJ Koji (Fs-C); and fermentation with improved Nuruk; Aspergillus luchuensis (Fs-D) and Aspergillus oryzae (Fs-E), were prepared. Samples were collected at 15 days intervals with 10% Nuruk added to raw anchovy and fermented at 25o C for 60 days. The free amino acids, especially glutamic acid content and amino nitrogen, were the highest in Fs-C, reflecting the high protease activity of Nuruk C (GJ). Regarding overall sensory evaluation, the control was the lowest, whereas Fs-C was highly evaluated among the sample groups. The addition of Nuruk not only shortened the fermentation period, but also increased the overall sensory level by adding umami and reducing fishy odor.

• Microbiology and Biotechnology Letters
• /
• v.40 no.2
• /
• pp.152-156
• /
• 2012

Methanotrophic communities from freshwater wetland (FW), seawater wetland (SW), forest (FS), and landfill soils (LS) around Seoul of South Korea, were characterized using comparative sequence analyses of clone libraries. Proportions of Methylocaldum, Methlyococcus and Methylosinus were found to be greater in FW and SW, while Methylobacter and Methylomonas were more notable in FS and Methylocystis and Methylomicrobium more prominent in LS. Lag periods behind the initiation of methane oxidation significantly varied amongst the soils. Methane oxidation rates were greater in $FW{\geq}LS{\geq}SW>FS$ (p<0.05). Thus, the environmental setting is a significant factor influencing the communities and capabilities of methanotrophs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.181-186
• /
• 2004

Analysis on sharing between GSO FSS and terrestrial system in the 40㎓ band, related with the problem for sharing between terrestrial services and FSS and identification of HDFSS downlink bands in World Radiocommunication Conference 2003, was practiced by assuming that both systems are operated in Korea. According to results from simulation using the characteristic parameters of GSO FSS and terrestrial FS system in 40 ㎓ described in ITU-R Recommendations, in case that elevation and azimuth angle of antenna of FS station are adjusted to point directly to the geostationary satellite, the GSO system can cause the worst interference to the FS system. This situation is possible to occur in the installation of 40 GHz FS station in urban area where there are high-rise buildings. If high-density FS stations in 40 ㎓ band are operated in the future, interference mitigation techniques to avoid GSO arc should be considered.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1049-1057
• /
• 2012

The study investigated the biochemical methane potential (BMP) assay of pig slurry supplemented with mixed methanogens and cellulolytic bacteria to improve anaerobic digestion for methane production. For the BMP assay, 7 different microbial supplementation groups consisted of the cultures of mixed methanogens (M), Fibrobacter succinogenes (FS), Ruminococcus flavefaciensn (RF), R. albus (RA), RA+FS, M+RA+FS, and control. The cultures were added in the batch reactors with the increasing dose levels of 1% (0.5 mL), 3% (1.5 mL) and 5% (2.5 mL). Incubation for the BMP assay was carried out for 60 days at $38^{\circ}C$ using anaerobic digestate obtained from an anaerobic digester with pig slurry as inoculum. In results, 5% RF and RA+FS increased total biogas up to 8.1 and 8.4%, respectively, compared with that of control (p<0.05). All 5% microbial culture supplements significantly increased methane production up to 12.1~17.9% compared with that of control (p<0.05). Total solid (TS) and volatile solid (VS) digestion efficiencies showed no relationship to the increased supplementation levels of microbial cultures. After incubation, pH values in all treatment groups ranged between 7.527 and 7.657 indicating that methanogensis was not inhibited during the incubation. In conclusion, the results indicated that both hydrolysis and methanogenesis stages for methane production in anaerobic batch reactors were influenced by the supplemented microorganisms due to the chemical characteristics of pig slurry, but only the 5% supplementation level of all microbial culture supplements used in the experiment affected methane production.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.57-65
• /
• 2002

In this paper, a 2.5V 10-bit 300MSPS CMOS D/A Converter is described. The architecture of the D/A Converter is based on a current steering 8+2 segmented type, which reduces non-linearity error and other secondary effects. In order to achieve a high performance D/A Converter, a novel current cell with a low spurious deglitchnig circuit and a novel inverse thermomeer decoder are proposed. To verify the performance, it is integrated with $0.25{\mu}m$ CMOS 1-poly 5-metal technology. The effective chip area is $1.56mm^2$ and power consumption is about 84mW at 2.5V power supply. The simulation and experimental results show that the glitch energy is 0.9pVsec at fs=100MHz, 15pVsec at fs=300MHz in worst case, respectively. Further, both of INL and DNL are within ${\pm}$1.5LSB, and the SFDR is about 45dB when sampling, frequency, is 300MHz and output frequency is 1MHz.