• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.195-196
• /
• 2009

This paper describes the fabrication and characteristics of polycrystalline 3C-SiC thin film diodes for extreme environment applications, in which the this thin film was deposited onto oxidized Si wafers by APCVD using HMDS In this work, the optimized growth temperature and HMDS flow rate were $1,100^{\circ}C$ and 8sccm, respectively. A Schottky diode with a Au, Al/poly 3C-SiC/$SiO_2$/Si(n-type) structure was fabricated and its threshold voltage ($V_d$), breakdown voltage, thickness of depletion layer, and doping concentration ($N_D$) values were measured as 0.84V, over 140V, 61nm, and $2.7{\times}10^{19}cm^2$, respectively. To produce good ohmic contact, Al/3C-SiC were annealed at 300, 400, and $500^{\circ}C$ for 30min under a vacuum of $5.0{\times}10^{-6}$Torr. The obtained p-n junction diode fabricated by poly 3C-SiC had similar characteristics to a single 3C-SiC p-n junction diode.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.5 s.112
• /
• pp.94-103
• /
• 2005

This study was carried out to investigate growth and morphological characteristics of leaf, flower and winter bud of Corylopsis species such as C. coreana, C. spicata, C. sinensis, C. willmottiae, C. willmottiae 'Spring Purple', C. wilsonii, C. spicata 'Yellow Spring', C. gotoana, and C. vechiana. In the Corylopsis species, C. coreana, C. willmottiae, and C. vetchiana had larger flowers, longer flower cluster, and more flowers than other species. C. sinensis and C. veitchiana had fragrant flowers. In addition, species with beautiful leaf color were C. spicata 'Yellow spring' with yellow color and C. willmottiae 'Spring purple' with purple color, which eventually changed to green. The winter bud of C. sinensis, C. willmottiae, C. willmottiae 'Spring Purple', and C. vechiana were oval and different from those of other species. Comparison of the morphological characteristics among C. coreana, C. spicata, and C. sinensis, C. coreana showed they had earlier flowering dates and brighter yellow flowers than those of other species. Flower cluster of C. sinensis was shortest, but it had most number of flowers and fragrance. In addition, the winter buds of C. coreana and C. spicata with elliptical shape were different from that of C. sinensis with oval shape. Therefore, based on these characteristics, the following Corylopsis species were found to be promising as woody landscape plants: C. coreana, C. sinensis, C. willmottiae 'Spring Purple', C. spicata 'Yellow Spring', and C. vechiana.

• Journal of International Academy of Physical Therapy Research
• /
• v.7 no.1
• /
• pp.908-914
• /
• 2016

The purpose of this study is to explore the effects of mobilization of C0-C1 and C7-T1 applied to asymptomatic individuals with reduced upper cervical rotation during the FRT. Design: parallel randomized controlled trial. 48 subjects(38.52 years${\pm}15.13$) with C1-C2 rotation hypomobility in TFR joined the study and were randomized into three groups(C0, C7, control group). FRT in both directions was measured before and after the intervention. C0 intervention consisted of a dorsal translatoric mobilization of C0-C1 in the cervical neutral position. C7 intervention consisted of a ventral cranial translatoric mobilization of C7-T1 in neutral position and the control group maintained a supine position. C0 group experienced a FRT ROM to the restricted side increase of $17.64^{\circ}$(SD=4.55), that was significantly greater (P<0.001) than $5.95^{\circ}$(SD=4.81) of the C7 group and $2.45^{\circ}$(SD=5.05) of the control group. The results showed that a dorsal translatoric mobilization of C0-C1 in neutral position restored the physiological FRT mobility in subjects with C1-C2 hypomobility and experienced statistical significant improvement in FRT as compared to a C7-T1 translatoric mobilization and a control group. (Level of evidence: 1b).

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.493-501
• /
• 2019

In this work, ultra-fine calcium oxide (CaO) powder derived from eggshells is used as the starting material to synthesize mineral trioxide aggregate (MTA). The prepared CaO powder is confirmed to have an average particle size of 500 nm. MTAs are synthesized with three types of fine CaO-based powders, namely, tricalcium silicate (C3S), dicalcium silicate (C2S), and tricalcium aluminate (C3A). The synthesis behavior of C3S, C2S and C3A with ultra-fine CaO powder and the effects of C₃A content and curing time on the properties of MTA are investigated. The characteristics of the synthesized MTA powders are examined by X-ray diffraction (XRD), field emission-scanning electron microscope (FE-SEM), and a universal testing machine (UTM). The microstructure and compressive strength characteristics of the synthesized MTA powders are strongly dependent on the C3A wt.% and curing time. Furthermore, MTA with 5 wt.% C3A is found to increase the compressive strength and shorten the curing time.

• Journal of the Korean Mathematical Society
• /
• v.32 no.3
• /
• pp.471-482
• /
• 1995

A complex n-dimensional Kaehlerian manifold of constant holomorphic sectional curvature c is called a comples space form, which is denoted by $M_n(c)$. A complete and simply connected complex space form consists of a complex projective space $P_nC$, a complex Euclidean space $C^n$ or a complex hyperbolic space $H_nC$, according as c > 0, c = 0 or c < 0. The induced almost contact metric structure of a real hypersurface M of $M_n(c)$ is denoted by $(\phi, \zeta, \eta, g)$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.484-491
• /
• 2004

C-band pumping effect appears in L-band EDFA because the absorption in C-band occurs dominant under the condition of such a low average population inversion. In this paper, we show how the C-band pumping effect depends on 980nm pump power, the C-band wavelength, and its input power. The C-band pumping is caused by absorbing C-band injection or backward spontaneous emission power through EDF. If the same small signal condition is given by a C-band pump, the C-band pump of a long wavelength is good for the saturation and noise characteristics of L-band signal. Finally, it is considered that in the aspect of saturation characteristics, C-band compensation is not so much efficient as L-band in Gain-Clamped L-band EDFA having a lossy resonator.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.147-152
• /
• 2004

Aerobic cometabolism of cis-1,2-dichloroethylene (c-DCE) and c-DCE epoxide by a butane-grown mixed culture was evaluated. Transformation of c-DCE resulted in the concomitant generation of c-DCE epoxide. Chloride release studies showed nearly complete oxidative dechlorination of c-DCE (approximately 75%). Mass spectrometry confirmed tile presence of a compound with mass-to-charge-fragment ratios of 112, 83, 48, and 35. The values are in agreement with the spectra of a chemically synthesized c-DCE epoxide. Some evidences indicating the involvement of the monooxygenase in the transformation of c-DCE epoxide are: 1) $O_2$ requirement for c-DCE transformation and butane degradation; 2) butane inhibition on c-DCE transformation and vice versa; 3) the inactivation of c-DCE and c-DCE epoxide transformations by acetylene (a known monooxygenase inactivator); and 4) tire inhibition of c-DCE epoxide transformation by c-DCE.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.48
• /
• pp.233-240
• /
• 1998

Recently, Hong-Jun Kim et al. introduced an improved process incapability index $C^*_{psk}$ by the transformation of the $C_{psk}{\;}C^*_{psk}$. A simple transformation of $C_{psk}$, can be regard as a process incapability index, provides an uncontaminated separation between information concerning the process accuracy and precision while this kind of information separation is not available with the $C_{psk}$. By an identical conception, in this article a new process incapability index $C^*_{psk}$ for Non-Normal process can be proposed by the transformation of the process capability index $C^*_{psk}$. The motivation behind introduction of $C^*_{psk}$ is that process capability index $C^*_{psk}$ cannot give information of the process accuracy and precision. A significant result of this research that $C^*_{psk}$ for the case where the target value T is equal to the midpoint of the specification limits or not Is evaluated without respect to T. Accordingly, $C^*_({psk})$ will be propose a reasonable process incapability measure for Non-Normal process

• 전기의세계
• /
• v.13 no.1
• /
• pp.20-23
• /
• 1964

본 변환기는 교번자계의 원리에 의한 보통 변환기가 아니고 회전자계의 원리를 이용한 변환기로서 상변환, 주파수변화, A.C.에서 D.C. 전원변환, D.C.에서 A.C. 전원변환, 속도제어, 진상기 등을 얻을 수 있는 경제적이고 능률적인 변환기를 얻을 수 있다. 임의의 다상을 얻을 수 있는 이 변환기는 다상 전원을 필요로 하는 수은정류기 등에 응용할 수 있고 A.C.전원에서 D.C.전원의 대용량전원을 얻어 D.C.전원이 필요로 하는 직류전철의 전원, 직류송전의 전원등에 이용할 수 있고, D.C.전원에서 A.C.전원을 얻어 교류전력기를 운전할 수 있으며 D.C.송전선에서 A.C.로 변환하여 종전의 A.C.배전선에 공급하면 D.C.송전을 이용한 송전손실을 경감시킬수 있고 주파수를 변환하여 속도제어를 하는 등 광범위하게 그 응용이 가능한 것이다.

• Journal of Biosystems Engineering
• /
• v.24 no.2
• /
• pp.107-114
• /
• 1999

To find the best combustion conditions in the heavy oil burner kinetic viscosity of heavy oil A, B and C at different temperature range, from 40 to 140$^{\circ}C$, and the droplet sizes of the heavy oils at different temperature and pump pressure were measured. And, combustion characteristics were investigated under the different conditions : two different heavy oil and three different oil temperature. At temperature of 70, 100, 130$^{\circ}C$ the kinetic viscosity of heavy oil A and B are 7.9, 5.7, 4.3 and 30.4, 13.7, 7.9cSt, respectively. The greatest and smallest viscosity were 7,455 cSt at C oil on 27$^{\circ}C$ and 4.26cSt at A oil on 140$^{\circ}C$. The magnitude of viscosity difference between at 100$^{\circ}C$ and 140$^{\circ}C$ under 6 cSt in cases of A and B oil, but more than 30cST on C oil. Of the droplet sizes, the biggest and smallest droplet size in A oil were 98$\mu\textrm{m}$ at oil temperature of 130$^{\circ}C$(4.3cSt), pump pressure of 1.57MPa and 72$\mu\textrm{m}$ at 70$^{\circ}C$(7.9cSt), 2.35MPa, respectively. It appeared that as spraying pressure increased the droplet size decreased, however, no distinct differences were found in the effects of kinetic viscosity on the droplet sizes of the test range. The best combustion performance was observed when droplet size, spraying pressure and oil temperature were 73$\mu\textrm{m}$, 2.35MPa and 70$^{\circ}C$ producing CO2 of 13.1%, CO of 13ppm and flue gas temperature of 250$^{\circ}C$ in A oil combustion For B oil, it was100$^{\circ}C$, 2.35MPa, 52$\mu\textrm{m}$, producing CO2 of 10ppm and flue gas temperature of 260$^{\circ}C$. In general, it appeared that better combustion results were observed in the smaller droplets produced burner condition.