• 디지털산업정보학회논문지
• /
• 제12권3호
• /
• pp.25-31
• /
• 2016

Mechanical properties of Y2O3-containing tetragonal ZrO2 polycrystals(Y-TZP) were investigated. Several additives were used to modify the hardness and fracture toughness of Y-TZP. The effects of these individual additives were discussed and their interactions were also analysed. Each additive, such as CoO, Fe2O3, MnO2 was found to deteriorate the mechanical properties of Y-TZP when it was used singly. But the fracture toughness of Y-TZP was significantly improved when these additives and Al2O3 were added in combination at a certain ratio. The addition of CoO, Fe2O3 and MnO2 into Y-TZP resulted in the more complex behavior of fracture toughness and hardness. The specimen with 1.5 wt%-Fe2O3, 3.0 wt% -Al2O3 and 1.5 wt%-CoO showed the monoclinic to tetragonal phase ratio of 18% and the highest toughness of $10.8MPa{\cdot}m1/2$ with Vickers hardness of 1201 kgf/mm2. However, the toughness decreased as the ratio increased and macrocracks developed beyond the ratio of 25%. Sample No. 16 is improved high Physical and Mechanical Properties.

• The Korean Journal of Ceramics
• /
• 제2권3호
• /
• pp.162-166
• /
• 1996

The effects of NiO addition on the microstructure and microwave dielectric properties of ($Zr_{08}Sn_{02}$)$TiO_4$ (ZST) were investigated. With the NiO addition, a higher density of ZST ceramics than 95% of the theoretical values has been obtained in the sintering temperature range of 1400 to 150$0^{\circ}C$. Energy dispersive X-ray spectrometry (EDS) analysis of sintered specimen shows the presence of second phase at grain boundaries, which is considered to be $NiTiO_3$. Dielectric constant of the specimen is found to increase linearly with density. Q-values and TC$_r$ decrease with increasing NiO content. The variation of dielectric properties with NiO content is discussed in terms of the second phase. The ZST ceramics with 0.25 wt% NiO showed ${\varepsilon}_{\gamma}$=38, Q=7000 at GHz and TC$\gamma$=-0.5 ppm/$^{\circ}C$, comparable with the values obtained by the previous investigations.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.171-171
• /
• 2003

공정기술의 향상으로 DRAM(dynamic random acess memory)의 고집적화가 이루어지고 있으며, 각 개별소자 및 셀 영역의 점유면적의 감소가 요구되어지고 있다. 따라서 기존에 사용하던 NO (Si$_3$N$_4$/SiO$_2$)박막보다 유전율이 높은 고유전물질에 대한 연구가 진행되고 있다. Ta$_2$O$_{5}$, $Y_2$O$_3$, HfO$_2$, ZrO$_2$,Nb$_2$O$_{5}$, BaTiO$_3$, SrTiO$_3$ 및 (BaSr)TiO등이 고유전물질로 연구되고 있는데 그 중 공정의 안정성, 누설전류의 우수성으로 인해 Ta$_2$O$_{5}$이 많이 연구되고 있다. 본 실험에서는 TiO$_2$가 8 mol%가 첨가된 Ta$_2$O$_{5}$의 열처리 온도에 따른 전기적, 유전특성을 살펴보려고 한다살펴보려고 한다

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.746-748
• /
• 2002

The effect of $MnO_2$ addition in $0.05Pb(Sn_{0.5}Sb_{0.5})O_3-0.8PbZrO_3-0.15PbTiO_3$(0.05PSS-0.8PZ-0.15PT) ceramics on crystal structure and electrical properties were studied. The sintering temperature and time were $1230^{\circ}C{\sim}1270^{\circ}C$ and 2hr, respectively. Then crystal structure, dielectric and pyroelectric properties were investigated. All the poled specimens showed the lower dielectric constant and $tan{\delta}$ than the unpoled specimens. Dielectric constant at 1kHz of the 0.05PSS-0.8PZ-0.15PT(MnO2 0.3wt%) system specimen sintered at $1250^{\circ}C$ for 2hr were 270 and showed the lowest $tan{\delta}$ of 0.2% after poling of $2kV_{DC}/mm$ at $150^{\circ}C$ for 30 minutes. Pyroelectric coefficient was maximum value of $50nC/cm^2K$ and Curie temperature was $224^{\circ}C$.

• 한국세라믹학회지
• /
• 제35권3호
• /
• pp.273-279
• /
• 1998

Unite cell of soid oxide fuel cell (SOFC) that consists of a dense yttria-stabilized zirconia(YSZ) electrolyte a porous nickel-YSZ cermet anode and a porous strontium- doped lanthanum manganate(LSM) cathod was fabricated from using pore former through co-firing technique. Initial sintering shrinkage rates of each layer were identified for fabricating SOFC. Heterogenous sintering was very effective in tailoring shrinkage rate for three layers. The powder tailoring necessary for shrinkage rate matching are as follows ; electrolyte of 60% TZ8YS/ 40% TZ8Y mixture anode of 51wt% NiO/49 wt% (70wt% TZ8YS/30 wt% UT ZrO2) mixture and cathode of 80% LSM/20% UT ZrO2 mixture . The overall sintering shrinkage rate differences of three layers using these compositions were maintained in a few percent.

• 한국재료학회지
• /
• 제8권7호
• /
• pp.596-600
• /
• 1998

반응결합 알루미나(RBAO)-SiC 세라믹스를 AI금속분말/$AI_2O_3$/SiC 분말혼합체로부터 제조하였다. 하소알루미나와 용융알루미나를 알루미나 분말공급원으로 사용하였다. 출발원료는 단일구경(3mm)또는 혼합구경(3mm+5mm)의 $ZrO_2$볼로 어트리션 밀링 하였다. 정수압 성형한 시편을 $1100^{\circ}C$까지$ 1.5^{\circ}C$/mim로 1차소성한 다음,$ 1500^{\circ}C$~$1600^{\circ}C$까지 $5^{\circ}C$/mim으로 2차소성하였다. 용융알루미나와의 분말혼합체가 하소알루미나와의 분말혼합체보다 분쇄가 더욱 잘 되었다. 또한 단일구가 혼합구보다 분쇄에 더욱 효율적이었다. $AI_2O_3$ 형태에 따른 반응소결거동에는 별 차이가 없었다.

• 한국세라믹학회지
• /
• 제38권9호
• /
• pp.834-838
• /
• 2001

고체 전해질로 많이 사용되는 이트리아로 안정화된 입방정형(cubic) 지르코니아의 기계적 강도를 향상시키기 위하여, 단사형(monoclinic) 지르코니아(m-$ZrO_2$)를 원료로 지르코니아　 안정화시키는 이트리아와 지르코니아의 낮은 기계적 강도를 향상시켜 주기 위한 알루미나를 Yag($Y_3Al_5O_{13}$)졸의 형태로 첨가하여, 졸 형태로 첨가된 이트리아와 알루미나가 입방정 지르코니아 소결체의 기계적, 전기적 특성에 미치는 영향을 조사하였다. 17.8 wt% Yag(6.3mol% $Y_2O_3$)가 첨가된 경우 파괴인성은 3.62MPa${\cdot}m^{1/2}$, 파괴강도는 447MPa로 8mol%의 이트리아로 안정화된 지르코니아(TZ8Y)의 1.44MPa${\cdot}m^{1/2}$, 270MPa에 비하여 기계적 특성이 현저히 향상되었으나, 950$^{\circ}$C, 공기분위기에서의 전기전도도는 0.057${\Omega}^{-1}cm^{-1}$로 TZ8Y에 비해 반 정도로 낮아졌으며, 21.6wt% Yag(8.0mol% $Y_2O_3$)가 첨가된 경우에는 파괴인성은 2.93MPa${\cdot}m^{1/2}$, 파괴강도는 388MPa로 TZ8Y에 비하여 향상되었고, 전기전도도는 0.076${\Omega}^{-1}cm^{-1}$을 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제21권6호
• /
• pp.552-555
• /
• 2008

The purpose of this study was to find a best condition of fabricating lead zirconate thin film by sol-gel method, especially to find mol ratio and post annealing temperature. Lead zirconate thin film was made by spin coating method. The ratios of Pb and Zr of precursors were 1:0.8, 1:1.0, and 1:1.2. Annealing temperature of films were $600^{\circ}C$, $700^{\circ}C$, and $800^{\circ}C$ for 1 minute. Crystal structure was observed from XRD and antiferroelectricity was observed from hysteresis curves. The optimum mol ratio of Pb:Zr is 1:0.8 and annealing temperature is $800^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1067-1072
• /
• 2002

A new polystyrene-divinylbenzene resin containing 2-(2-thiazolylazo)-5-dimethylamino-phenol (TAM) functional groups has been synthesized and its sorption behavior for nineteen metal ions, including Zr(Ⅳ),Hf(Ⅳ) and U(Ⅵ) has been investigated by batch and column methods. The chelating resin showed high sorption affinity for Zr(Ⅳ) at pH 1-5 and U(Ⅵ) at pH 4. Some parameters affecting the sorption of the metal ions have been detailed. The breakthrough and overall capacities were measured under optimized conditions. The overall capacities of Zr(Ⅳ), Th(Ⅳ) and U(Ⅵ), which showed higher than the other metal ions, were 0.90,0.84 and 0.80 mmol/g, respectively. The elution order of metal ions at pH 4 was evaluated as Zr(Ⅳ) > Th(Ⅳ) > U(Ⅵ) > Cu(Ⅱ) > Hf(Ⅳ) > W(Ⅵ) > Mo(Ⅵ) > In(Ⅲ) > Sn(Ⅳ) > Cr(Ⅲ) > V(Ⅴ) > Fe(Ⅲ). Quantitative recovery of most metal ions except Zr(Ⅳ) was achieved using 2M HNO3. Desorption and recovery of Zr(Ⅳ) was successfully performed with 2 M HClO4 and 2 M HCl.

• 공업화학
• /
• 제21권6호
• /
• pp.648-652
• /
• 2010

고정층 상압 흐름 반응기에서 메탄의 부분산화반응를 수행하여 메탄으로부터 수소제조 위한 촉매의 활성도를 평가하였고, BET, XPS, XRD를 사용하여 촉매의 특성을 분석하였다. Pd(5)/Ti-SPK과 Pd(5)/Zr-SPK 촉매의 BET 표면적, Horvath-Kawaze의 기공부피와 기공폭, t-플롯 미세기공 면적과 부피는 각각 $284m^2/g$, $0.233cm^3/g$, 3.9 nm, $30m^2/g$ $0.015cm^3/g$과 $396m^2/g$, $0.324cm^3/g$, 3.7 nm, $119m^2/g$, $0.055cm^3/g$이었다. 촉매는 히스테리시스가 잘 발달된 IV형 임을 $N_2$-흡착등온선으로부터 확인할 수 있었다. XPS분석으로부터 SPK에 Ti와 Zr이 부분 치환된 Ti-SPK과 Zr-SPK의 Si 2p과 O 1s 피크는 SPK의 Si 2p와 O 1s 피크 보다 낮은 결합에너지 쪽으로 화학 이동함을 알 수 있었고, 촉매표면의 Pd의 산화상태는 $Pd^0$와 $Pd^{+2}$이었다. XRD의 결정 피크는 반응 전에 무정형인 촉매가 반응 후에는 결정상으로 변함을 보여주었다. Pd(5)/Ti-SPK과 Pd(5)/Zr-SPK 촉매의 메탄의 전화율과 수소의 선택도는 973 K, $CH_4/O_2$ = 2, GHSV = $8.4{\times}10^4mL/g_{cat}{\cdot}h$. 반응조건에서 각각 77, 84%와 78, 72%이었고, 반응 시작 후 3일까지도 촉매의 활성이 거의 일정하게 유지되었다. Pd(5)/Ti-SPK과 Pd(5)/Zr-SPK 촉매는 메탄의 부분산화반응에서 활성도와 열 안정성 및 물리화학적 성질이 우수하였다.