• Title/Summary/Keyword: $Y_2O_3$ additive

Search Result 528, Processing Time 0.028 seconds

Effects of Additives on the Characteristics and Microstructure of $UO_2$ Pellet ($UO_2$ 소결체의 특성 및 미세구조에 미치는 첨가제의 영향)

  • 유호식;이신영;이승재;강권호;김형수
    • Journal of the Korean Ceramic Society
    • /
    • v.37 no.7
    • /
    • pp.660-664
    • /
    • 2000
  • Effect of various kinds of additive such as AlOOH, Al(OH)3, Al2Si2O5(OH)4, Nb2O5, TiO2 and MgO on the properties and microstructures of UO2 pellet has been examined. All the tested dopants had played a role to reduce sintered density and open porosity. It was revealed that the addition of TiO2 made pellet more stable thermally. UO2 pellet doped with 0.2wt% TiO2 was swelled rather than densified after annealing for 24 hrs at 1$700^{\circ}C$. It was attributed to large pore with spherical shape. Titinia and silicon coexisted with Al element were more effective to increase grain size than other additives. It could be also revealed that the formation of liquid phase was the main cause of grain growth.

  • PDF

Effect of PbO on Microwave Dielectric Properties of (Pb, Ca) (Fe, Nb, Sn) O3 Ceramics

  • Yoon, Seok-Jin;Park, Ji-Won;Kang, Chong-Yun;Kim, Hyun-Jai;Jung, Hyung-Jin;Sergey Kucheiko;Cho, Bong-Hee
    • The Korean Journal of Ceramics
    • /
    • v.4 no.3
    • /
    • pp.249-253
    • /
    • 1998
  • The influence of PbO additive on dielectric properties and sintering behavior of $(Pb_{0.46}Ca_{0.55})$ {$(Fe__1/2}Nb_{1/2}){0.9}Sn_{{0.1}$}$O_3$ ceramics has been investigated. The incorporation of a limited excess PbO ($\leq$2.0 wt. %) in the starting materials is quite beneficial for densification in the temperature range of 1150~$1175^{\circ}C$ in air. At a small doping level (0.8 wt. %) the ceramics prepared from powders calcined at $900^{\circ}C$ showed the best dielectric properties. The dielectric constants ($\varepsilon_r$) and Q.f were found to be 85.8~85.6 and 8530~8600 GHz, respectively. The temperature coefficient of resonant frequency ($\tau_f$) varied in the range of -2~4 $ppm/^{\circ}C$. Examination of the microstructure as well as analysis of the second phases in these materials revealed the presence of the pyrochlore-type phase which is detrimental to the dielectrics.

  • PDF

Low Temperature Sintered $CaZr(BO_3)_2$ Microwave Dielectric Ceramics for LTCC Application ($CaZr(BO_3)_2$ 세라믹스의 저온 소결 및 마이크로웨이브 유전 특성)

  • Nam, Myoung-Hwa;Kim, Hyo-Tae;Kim, Jong-Hee;Mahm, Sahn
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2007.06a
    • /
    • pp.259-259
    • /
    • 2007
  • The low temperature sintering of dolomite type borates, $CaZr(BO_3)_2$[CZB] ceramics and their microwave dielectric properties were investigated The sintering temperature of CZB ceramics could be reduced from $1150^{\circ}C$ to $925^{\circ}C$ by the addition of sintering additive. $CaZrO_3$, $ZrO_2$ and $CaB_2O_4$ second phases were found in the CZB ceramics. The syntheses, sintering properties, microstructures, and dielectricnproperties of dolomite-type borates were examined by XRD, thermal analysis, electron microscopy, network analyzer, and the results are discussed intensively. The compatibility with silver electrode was also explored.

  • PDF

Organic Solvents Containing Zwitterion as Electrolyte for Li Ion Cells

  • Krishnan, Jegatha Nambi;Kim, Hyung-Sun;Lee, Jae-Kyun;Cho, Byung-Won;Roh, Eun-Joo;Lee, Sang-Gi
    • Bulletin of the Korean Chemical Society
    • /
    • v.29 no.9
    • /
    • pp.1705-1710
    • /
    • 2008
  • Imidazolium based zwitterions, 1,2-dimethylimidazolium-3-n-propanesulfonate (DMIm-3S) and 1-Butylimidazolium-3-n-butanesulphonate (BIm-4S), were synthesized, and utilized them as additive for Li ion cell comprising of graphite anode and $LiCoO_2$ cathode. The use of 10 wt% of DMIm-3S in 1 M $LiPF_6$, EC-EMCDMC (1:1:1 (v/v)) resulted in the increased high rate charge-discharge performance. The low temperature performance of the Li ion cells at about −20 ${^{\circ}C}$ was also enhanced by these zwitterion additives. The DMIm- 3S additive resulted in the better capacity retention by the Li-ion cells even after 120 cycles with 100% depth of discharge (DOD) at 1 C rate in room temperature. Surface morphology of both graphite and $LiCoO_2$ electrode before and after 300 cycles was studied by scanning electron microscopy. An analogous study was performed using liquid electrolyte without any additive.

Effect of $TiO_2$ on Sintering Behavior of Mixed $UO_2$ and $U_3O_8$ Powder Compacts

  • Song, Kun-Woo;Kim, Keon-Sik;Kang, Ki-Won;Kim, Young-Min;Yang, Jae-Ho;Jung, Youn-Ho
    • Nuclear Engineering and Technology
    • /
    • v.31 no.5
    • /
    • pp.455-464
    • /
    • 1999
  • The effect of TiO$_2$ on the sintering behavior of mixed UO$_2$-U$_3$O$_{8}$ Powder compacts has been investigated using the U$_{3}$O$_{8}$ powder made tv oxidation of defective UO$_{2}$ pellets. Without TiO$_2$, UO$_2$ pellet density is inversely proportional to U$_3$O$_{8}$ content and is below 94 %TD in the U$_3$O$_{8}$ range above 15 wt%. Using more than 0.1 wt % TiO$_2$, however, the density decreases slightly with U$_3$O$_{8}$ content and thus is higher than about 94% TD in the whole range of U$_3$O$_{8}$ content. The grain sizes of UO$_2$ pellets with more than 0.1 wt % TiO$_2$are larger than about 30${\mu}{\textrm}{m}$. Therefore, the U$_3$O$_{8}$ Powder can be reused without any restriction on its amount in UO$_2$ pellet fabrication by sintering the mixed UO$_2$-U$_3$O$_{8}$ compact with the aid of TiO$_2$. Mechanisms for densification and grain growth are proposed and discussed, based on a dilatometry study and an examination of microstructure. microstructure.

  • PDF

EFFECT OF $SiO_2-CaO-Cr_2O_3$ ON THE CREEP PROPERTY OF URANIUM DIOXIDE

  • RHEE YOUNG WOO;KANG KI WON;KIM KEON SIK;YANG JAE HO;KIM JONG HEON;SONG KUN WOO
    • Nuclear Engineering and Technology
    • /
    • v.37 no.3
    • /
    • pp.287-292
    • /
    • 2005
  • [ $\pi$ ]The effects of silica-based additives have been investigated to improve the creep property of a $UO_2$ pellet. The additive composition, $50wt\%SiO_2-47wt{\%}CaO-3wt\%Cr_2O_3$ (SCC), was selected according to the dihedral angle and the distribution of the second phase. It was observed that the creep rate of the $0.07 wt\%$ SCC-added $UO_2$ was slower than that of the pure $UO_2$. However, the creep rate of the $0.22 wt\%$ SCC-added $UO_2$ was about 3_48 times faster than that of the pure $UO_2$, depending on the applied stress in the lower stress range. In the case of the $0.35 wt\%$ SCC-added $UO_2$, the creep rate decreased in comparison with that of the $0.22 wt\%$ SCC-added $UO_2$. The observed enhancement in the creep rate might depend on a balance between the positive role of the viscous intergranular phase and the negative roles of the additives and the grain growth.

Microwave Dielectric Properties of Ca[($Li_{1/3}Nb_{2/3}$)$_{1-x}$$Ti_{x}$]$O_{3-{\delta}}$ with $Bi_2O_3$ Additives ($Bi_2O_3$ 첨가에 의한 Ca[($Li_{1/3}Nb_{2/3}$)$_{1-x}$$Ti_{x}$$O_{3-{\delta}}$ 세라믹스의 마이크로파 유전 특성)

  • 하종윤;최지원;이동윤;윤석진;최두진;김현재
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2002.07a
    • /
    • pp.131-134
    • /
    • 2002
  • The effect of the addition on the densification, low temperature sintering, and microwave dielectric properties of the Ca[($Li_{1/3}Nb_{2/3}$)$_{1-x}$$Ti_{x}$]$O_{3-{\delta}}$/(CLNT) was investigated. $Bi_2O_3$ additives improved the dencification and reduced the sintering temperature from $1150^{\circ}C$ to $900^{\circ}C$ of CLNT microwave dielectric ceramics. As increasing $Bi_2O_3$ contents, the dielectric constants and bulk density were increased. The quality factor, however, was decreased slighty. The temperature coefficients of the resonant frequency shifted positive value as increasing $Bi_2O_3$ contents. The dielectric properties of Ca[($Li_{1/3}Nb_{2/3}$)$_{1-x}$$Ti_{x}$]$O_{3-{\delta}}$ and Ca[($Li_{1/3}Nb_{2/3}$)$_{0.8}Ti_{0.2}$]$O_{3-{\delta}}$ with 5wt% $Bi_2O_3$ sintered at $900^{\circ}C$ for 3h were $\varepsilon_{r}$=20, 35 Q.$f_{0}$=6500, 11,000 GHz, $\tau_{f}$=4, 13 ppm/$^{\circ}C$, respectively.

  • PDF

Experimental and Kinetic Studies of Esterification of Glycerol Using Combustion Synthesized SO42-/CeO2-Al2O3

  • Veluturla, Sravanthi;Narula, Archna;Rao, D. Subba;Indraja., S;Kulkarni, Rajeswari. M.
    • Korean Chemical Engineering Research
    • /
    • v.56 no.4
    • /
    • pp.592-599
    • /
    • 2018
  • An increase in the global production of biodiesel has resulted in the newfound significance of its byproduct, glycerol. The synthesis of acetins is an economical avenue to enhance the value of glycerol derived from biodiesel. WE developed an eco-friendly process for the synthesis of fuel additives from glycerol using a mixed oxide $SO{_4}^{2-}/CeO_2-Al_2O_3$ as catalyst. The $CeO_2-Al_2O_3$ mixed oxide was synthesized by the combustion method and then sulfated. The characterization of the catalyst was by means of XRD, BET, FTIR, and SEM. The influence of temperature, mole ratio and catalyst loading on yield and selectivity of the acetins was studied for the esterification of glycerol. The reaction rate constants ($k_1$, $k_2$ and $k_3$) were estimated using optimization method in MAT lab, and the activation energies ($E_1$, $E_2$ and $E_3$) were determined by the Arrhenius equation. Furthermore, a kinetic model was developed.

Effects of Dietary Herbs on Growth and Body Composition of Juvenile Abalone, Haliotis discus hannai (사료 첨가제로서 한약제가 참전복 치패의 성장 및 체성분에 미치는 영향)

  • LEE Sang-Min;PARK Chul Soo;KIM Dong Soo
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.34 no.5
    • /
    • pp.570-575
    • /
    • 2001
  • Three feeding experiments were conducted to investigate the effects of herbs (Obosan-C or Obosan-O) as an additive in formulated diets on growth and body composition of juvenile abalone (Haliotis discus hannai), Three replicate groups of abalone initially average weighing 206 mg, 827 mg and 432 mg were fed the each one of experimental diet containing $0\%\;or\;1\%$ Obosan for 10 (experiment 1), 7 (experiment 2) and 19 weeks (experiment 3), respectively. In addition, an imported commercial diet for abalone was also employed to compare growth performance of juvenile abalone. Weight gain of abalone fed the diet containing Obosan-O was significantly (P<0.05) higher than that of abalone fed the control diet in the experiment 3. Moisture, crude protein and ash contents of soft whole body were not influenced by dietary herbs (P>0.05), whereas crude lipid content of abalone fed the diets containing Obosan-C was significantly (P<0.05) lower than that of abalone fed the control diet in the experiment 2. The results indicate that Obosan-O as an additive in formulated diet can improve body growth of juvenile abalone.

  • PDF

The Effect of Reaction Parameters in the Characteristic of PZT Powders Synthesized by SHS (SHS법으로 합성된 PZT분말의 특성에 미치는 반응변수의 영향)

  • Kim, Byeong-Beom;Yang, Beom-Seok;Yun, Ki-Seok;Won, Chang-Whan
    • Journal of the Korean Ceramic Society
    • /
    • v.42 no.5 s.276
    • /
    • pp.314-318
    • /
    • 2005
  • The effect of reaction parameters in the characteristic of $Pb(Zr_{0.52}Ti_{0.48})O_3$ (below nominal PZT) powders by SHS was investigated in this study. In the preparation of PZT, the effect of starting material contents, pressure, additive on phase fraction and morphology was investigated respectively. The optimum condition of PZT powders were prepared by SHS is $0.37Pb_3O_4+0.52ZrO_2+0.48TiO_2+0.35KClO_3+0.5C,\;(P_{Ar}= 50 atm)$. The PZT powder synthesized in this condition had an spherical shape and the particle size of 0.8$\mu$m.