• 제목/요약/키워드: $W_{3}$ powders

검색결과 207건 처리시간 0.029초

구형 PMMA와 WO3 분말이 혼합된 Camphene 슬러리의 동결건조에 의한 W 다공체 제조 (Fabrication of Porous W by Freeze-Drying Process of Camphene Slurries with Spherical PMMA and WO3 Powders)

  • 이한얼;전기철;김영도;석명진;오승탁
    • 한국재료학회지
    • /
    • 제25권11호
    • /
    • pp.602-606
    • /
    • 2015
  • Porous W with spherical and directionally aligned pores was fabricated by the combination of sacrificial fugitives and a freeze-drying process. Camphene slurries with powder mixtures of $WO_3$ and spherical PMMA of 20 vol% were frozen at $-25^{\circ}C$ and dried for the sublimation of the camphene. The green bodies were heat-treated at $400^{\circ}C$ for 2 h to decompose the PMMA; then, sintering was carried out at $1200^{\circ}C$ in a hydrogen atmosphere for 2 h. TGA and XRD analysis showed that the PMMA decomposed at about $400^{\circ}C$, and $WO_3$ was reduced to metallic W at $800^{\circ}C$ without any reaction phases. The sintered bodies with $WO_3$-PMMA contents of 15 and 20 vol% showed large pores with aligned direction and small pores in the internal walls of the large pores. The pore formation was discussed in terms of the solidication behavior of liquid camphene with solid particles. Spherical pores, formed by decomposition of PMMA, were observed in the sintered specimens. Also, microstructural observation revealed that struts between the small pores consisted of very fine particles with size of about 300 nm.

MA법으로 제조된 CrSi2 열전화합물의 평가 및 치밀화 (Characterization and consolidation of thermoelectric CrSi2 compound prepared by mechanical alloying)

  • 이충효;김영
    • 한국결정성장학회지
    • /
    • 제23권3호
    • /
    • pp.135-141
    • /
    • 2013
  • 본 연구에서는 $CrSi_2$ 열전화합물을 제조하기 위하여 순금속 $Cr_{33}Si_{67}$ 혼합분말을 기계적 합금화 처리하였다. 초미세 $CrSi_2$계 열전화합물을 얻기 위하여 최적 볼밀조건 및 열처리 조건을 X선 회절분석과 시차주사 열량분석을 이용하여 조사하였다. 순금속 $Cr_{33}Si_{67}$ 혼합분말을 70시간까지 볼밀 처리 후 $650^{\circ}C$까지 열처리함으로써 평균 결정립 크기가 70 nm 인 초미세 $CrSi_2$ 열전화합물을 얻을 수 있었다. MA 분말시료의 벌크화를 위하여 소결온도 $600{\sim}1000^{\circ}C$, 압력 60 MPa에서 SPS 소결을 실시하였다. SPS 과정에서 MA 분말의 수축은 소결 개시 후 $600^{\circ}C$ 전후에서 크나 전반적으로 급격하게 발생하지 않으며 $1000^{\circ}C$까지 비교적 단조롭게 수축함을 알 수 있었다. 여기서 수축이 $600^{\circ}C$ 부근에서 큰 이유는 열분석 결과에서도 보여주듯이 $CrSi_2$ 화합물의 생성과 관련이 있는 것으로 판단된다. SPS 성형체의 전기전도도 및 제벡계수는 $900^{\circ}C$까지 측정을 실시하였으며, 그 결과로부터 제벡계수는 $400^{\circ}C$에서 $125{\mu}V/K$ 및 파워팩터는 $350^{\circ}C$에서 $4.3{\times}10^{-4}W/mK^2$의 최대값을 각각 나타내었다.

고지혈증 흰쥐에 있어서 버섯 분말의 콜레스테롤 저하효과 (Cholesterol-lowering Effect of Mushrooms Powder in Hyperlipidemic Rats)

  • 김범규;신갑균;전병삼;차재영
    • 한국식품영양과학회지
    • /
    • 제30권3호
    • /
    • pp.510-515
    • /
    • 2001
  • 본 실험에서는 0.5% 콜레스테롤과 0.25% 콜산나트륨을 첨가한 콜레스테롤 식이와 콜레스테롤 식이에 4.0% 수준의 버섯분말(Lentinus edodes, Ganoderma lucidum, Pleurotus ostreatus; 5 3:2, w/w/w) 첨가 식이를 female Sprague-Dawley 흰쥐에 4주동안 섭취시켜 지질농도에 미치는 영향을 조사하였다. 혈청 콜레스테롤 농도는 버섯분말 첨가 식이군에서 57% 감소하고, 혈청 HDL-콜레스테롤 농도는 230% 증가하여 동맥경화 지수가 68.4% 감소함으로써 버섯분말에 항동맥경화 효과가 있는 것으로 사료되었다. 간장 콜레스테롤 농도는 콜레스테롤 식이군에 비해 버섯분말 첨가식에서 24.7% 감소하였으나, 중성지질 농도는 50%의 유의한 증가를 나타내었다. 본 실험의 결과 콜레스테롤 식이에 버섯분말의 첨가에 의해 혈증 콜레스테롤 농도 저하효과와 동시에 항동백경화 효과가 인정되어 버섯분말을 소재로 새로운 생리활성을 가지는 기능성식품개발의 가능성이 시사되었다.

  • PDF

Electrochemical Properties of Li1.1V0.75W0.075Mo0.075O2/Graphite Composite Anodes for Lithium-ion Batteries

  • Kim, Hyung-Sun;Kim, Sang-Ok;Kim, Yong-Tae;Jung, Ji-Kwon;Na, Byung-Ki;Lee, Joong-Kee
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권1호
    • /
    • pp.65-68
    • /
    • 2012
  • Novel type $Li_{1.1}V_{0.9-2x}W_xMo_xO_2$ powders were prepared by a solid-state reaction of $Li_2CO_3$, $V_2O_3$, $WO_2$ and $MoO_2$ precursors in a nitrogen atmosphere containing 10 mol % hydrogen gas, and assessed as anode materials in lithium-ion batteries. The specific charge and discharge capacities of the $Li_{1.1}V_{0.9-2x}W_xMo_xO_2$ anodes were higher than those of the bare $Li_{1.1}V_{0.9}O_2$ anode. The cyclic efficiency of these anodes was approximately 73.3% at the first cycle, regardless of the presence of W and Mo doping. The composite anode, which was composed of $Li_{1.1}V_{0.75}W_{0.075}Mo_{0.075}O_2$ (20 wt %) and natural graphite (80 wt %), demonstrated reasonable specific capacity, high cyclic efficiency, and good cycling performance, even at high rates without capacity fading.

포도의 섭취가 흰쥐의 노화 과정 중 지방 대사에 미치는 영향 (Effect of Grape Intakes on Lipid Metabolism of Rats during Aging)

  • 엄민영;김미경
    • Journal of Nutrition and Health
    • /
    • 제35권7호
    • /
    • pp.713-728
    • /
    • 2002
  • This study was performed to see effects of whole grape, grape pomace or grape juice intakes on lipid metabolism during aging in old Sprague-Dawely male rats. One hundred twenty rats of 13 months old Sprague-Dawely were blocked into eight groups according to body weight and raised for 3, 5 or 7 months with diets containing 2% (w/w) dried powders of three different pars of grape and 0.02% (w/w) CdCl₂. Body weights of Cd groups were lower than Cd free groups. Kidney and spleen weights were incre ased with age, and EEP weights of Cd groups were lower than those of Cd free groups. Total lipid, triglyceride and total cholesterol concentration in plasma increased with age. Whole grape, grape pomace or grape juice intake lowered plasma total lipid triglyceride and total cholesterol concentrations, and especially grape pomace lowered them markedly. Whole grape, grape pomace or grape juice intake decreased liver total lipid, triglyceride and total cholesterol concentrations and increased fecal lipid excretion. Grape diets decreased and Cd administration increased TBARS concentration in LDL fraction. In conclusion, grape diets were effective in decreasing lipid levels of liver and plasma, TBARS in LDL, and in increasing HDL cholesterol. The grape pomace was most effective among three grape parts. It is plausible that grape might be recommended for the treatment or prevention of cardiovascular disease and delaying aging. (Korean J Nutrition 35 (7): 713∼728, 2002)

Simultaneous Synthesis and Densification of Wc-xvol.%Co Hard Materials by High-Frequency Induction Heated Combustion

  • Kim, H.C.;Oh, D.Y.;Jeong, J.W.;Shon, I.J.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2003년도 international symposium on advanced powder metallurgy
    • /
    • pp.41-42
    • /
    • 2003
  • Using a developed high-frequency induction heated combustion method. the simultaneous synthesis and densification of WC-xvol.%Co($0{\leq}x{\leq}20$) hard materials was accomplished using elemental powders of W, C and Co. A complete synthesis and densification of the materials was achieved in one step within a duration of 1min. The final relative densities of the composite were over 98.5% for all cases, under the applied pressure of 60 MPa and the induced current. The hardness of the composites decreases and the fracture toughness increases with increasing cobalt content. As the carbon to tungsten ration increases, the hardness increase, but the fracture toughness decreases. The maximum values for the fracture toughness and hardness are 15.1 $MPa{\cdot}m^{1/2}$(at 20vol.%Co, W:C=1:1), and 1928 $kg/mm^{2}$(at 5vol.%Co, W:C=1:1.3), respectively. Therefore we concluded that the HFIHCS method. which can produce WC-xvol.%Co within 1 minute in one step is superior to conventional ones.

  • PDF

저온소성용 PZT 세라믹스의 치밀화에 미치는 첨가제의 영향 (Influence of Additives on Densification of Low-Temperature PZT Ceramics)

  • 박용갑
    • 한국산학기술학회논문지
    • /
    • 제8권5호
    • /
    • pp.995-999
    • /
    • 2007
  • 저온 소결용 압전 세라믹 소결체의 치밀화에 미치는 첨가제의 영향을 조사하기 위하여 $PbZrTiO_3$(PZT) 분말을 제조하였으며, 이 PZT 분말을 이용하여 제조한 압전 세라믹스의 치밀화에 미치는 첨가제의 영향을 조사하였다. 첨가제는 $wB_2O_3-xBi_2O_3-zCuO$$LiBiO_2-CuO$ 두 종류가 제조되었으며 이 들 첨가제의 양을 변화 시켜 효과를 조사하였다. PZT 분말에 소결조제로서 1wt.% 의 $LiBiO_2-CuO$를 첨가하여 시편을 제조한 후, $800{\sim}1200^{\circ}C$까지의 온도 범위에서에서 소결한 결과 $900^{\circ}C$에서 최고의 소결밀도를 나타내었다. 소결된 압전체의 결정상을 분석하기 위하여 X-선회절분석을 시행하였으며, $900^{\circ}C$의 저온에서 소결한 $PbZrTiO_3$의 시편의 미세조직을 관찰하기 위하여 주사전자현미경(SEM)을 이용하였다. X-선 회절분석에서는 잘 발달된 PZT 상이 나타났으며, SEM 관찰 결과 평균입경은 $2{\sim}4\;{\mu}m$의 페로브스카이트 결정으로 균일하고 치밀한 조직을 나타내었으며, 높은 소결성은 첨가제에 의한 액상소결에 기인한다.

  • PDF

스테인레스 제강분진을 함유한 순철 압분코아의 자기특성 (Magnetic Properties of Powdered Fe Cores Containing Stainless Steel-making Dusts)

  • 김상원
    • 한국재료학회지
    • /
    • 제15권2호
    • /
    • pp.106-111
    • /
    • 2005
  • Effects of stainless steel-making dusts and binder content on compacting $density(\rho)$ and magnetic properties were evaluated. Cores compacted with the mixture of pure Fe powders, $5wt.\%$ dusts and $0.25wt.\%$ binder showed good AC magnetic properties. For example, permeability$({\mu}a)$ and core loss(P) of the cores containing $5wt.\%$ dusts at 500 kHz were 62 and $4008\;{\mu}W/cm^3$, respectively. These properties are almost equivalent to those of competitor's products (i.e, Ancorsteel TC 80 produced by $H\ddot{o}gan\ddot{a}s$ Corp.). The powdered cores obtained from the present work are expected to apply for high-performance soft magnetic components such as normal mode choke filter and pulse transformer.

코팅제 및 코팅 함량에 따른 철 분말 성형체의 특성 (Properties of compacted iron powder core coated with organic materials)

  • 민복기;김인성;김종령;최성조
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
    • /
    • pp.264-267
    • /
    • 2005
  • Soft magnetic iron powders have been coated with polyester or phenol resin. And the coated powder (soft magnetic composite) have been pressed into ring type core over the pressure of 870 MPa. Green density, magnetic flux density, permeability, core loss of the samples were measured to look at the effect of the coating materials and the amount of them. Green density is increased with the amount of coating materials and shows the maximum value, 6.5 $g/cm^3$ at 5 w/o, but decreased over it. And lowest value of the core loss is showed for the 5 w/o coated samples.

  • PDF

에멀젼법을 이용한 실리카 분말의 초음파 합성 (Ultrasonic Synthesis of Silica Powder Using Emulsion Method)

  • 이상근;김형섭;강범수;서금석;박성수;박희찬
    • 한국재료학회지
    • /
    • 제16권6호
    • /
    • pp.355-359
    • /
    • 2006
  • Fine silica powders were synthesized via w/o emulsion method using sodium silicate, ammonium sulfate, Triton N-57, and cyclohexane as silica source, precipitating agent, surfactant, and oil phase, respectively. The powders were prepared under a conventional process and an ultrasonic process using the same reactants at room temperature for 1 hr varying the concentration of $Na_2SiO_3$ solution and the mol ratio of $H_2O$/surfactant, respectively. The particle size of the silica powder was reduced with decreasing the concentration of sodium silicate solution and with increasing the mol ratio of $H_2O$/surfactant under with and without ultrasounds. The size of powder with ultrasounds was smaller than that without ultrasounds, which indicates that the application of ultrasound in the synthesis of silica powder is an efficient way to reduce particle size.