• 한국환경과학회지
• /
• 제21권4호
• /
• pp.411-419
• /
• 2012

In this study, Ibuprofen (IBP) degradation by the photo catalytic process was investigated under various parameters, such as UV intensity, optimum dosage of $TiO_2$, alkalinity, temperature and pH of bulk solution. The pseudo-first order degradation rate constants were in the order of $10^{-1}$ to $10^{-4}min^{-1}$ depending on each condition. The Photocatalytic IBP degradation rate increased with an increase in the applied UV power. At high UV intensity a high rate of tri-iodide ($I_3{^-}$) ion formation was also observed. Moreover, in order to avoid the use of an excess catalyst, the optimum dosage of catalyst under the various UV intensities (30 and 40 W/L) was examined and ranged from approximately 0.1 $gL^{-1}$. The photo catalytic IBP degradation rate was changed depending on the alkalinity and temperature and pH in the aqueous solution. This study demonstrated the potential of photo catalytic IBP degradation under different conditions.

• 공업화학
• /
• 제17권3호
• /
• pp.274-279
• /
• 2006

해중합 촉매인 zinc acetate ($C_{4}H_{6}O_{4}Zn{\cdot}2H_{2}O{\cdot}0.2\;mol$)와 lithuium hydroxide $H_{2}O$ ($LiOH{\cdot}H_{2}O{\cdot}0.14\;mol$)를 용매인 ethyl alcohol (99.9%)에 용해시킨 후 분산제인 hydroxypropyl cellulose (HPC)를 첨가하여 균일하게 분산된 ZnO (산화아연) 콜로이드 용액을 졸-겔법을 이용하여 합성하였다. ZnO 입자들의 크기와 모양은 분산제인 HPC에 의해 결정되었다. 또한 나노 크기의 ZnO 입자들은 zinc-2-ethylhexagonate를 기초로 한 침천법을 이용하여 얻었다. 이렇게 얻어진 ZnO 분말을 DLS, XRD, FE-SEM, 그리고 UV-Vis를 통하여 특성 분석을 하였다. 그 결과, 산화아연 분말은 자기조립 반응으로 균일하고 육방정계 모양의 구조를 가지는 것을 볼 수 있었다. 또 평균 입자 크기는 거의 40 nm이고 균일하게 분산되었다.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.181-187
• /
• 2022

CdSe-Mn nanocomposites were synthesized using a microwave method with sodium sulfite (Na₂SO₃), selenium (Se), cadmium sulfate octahydrate (3CdSO₄·8H₂O), ammonia solution (NH₃·H₂O), and manganese (II) sulfate monohydrate (MnSO₄·H₂O). We obtained CdSe-Mn-C₆₀ nanocomposites by calcining CdSe-Mn nanocomposites and fullerene (C₆₀) in an electric furnace at 700 ℃ for 2 h. X-ray diffraction, Raman spectroscopy, and scanning electron microscopy were used to characterize the crystal structures, lattice vibrations, and surface morphologies of the products, respectively. The photocatalytic activities of the CdSe-Mn-C₆₀ nanocomposites were investigated based on the photocatalytic degradations of organic dyes such as BG, MB, MO, and RhB under ultraviolet (UV) irradiation at 254 nm. UV-visible spectrophotometry was used to confirm the degradation process.

• 공업화학
• /
• 제9권5호
• /
• pp.719-725
• /
• 1998

Salicylaldehyde와 2-hydroxy-1-naphthaldehyde를 2-aminophenol과 2-amino-p-cresol에 반응시켜 세자리 Schiff base 리간드들을 합성하였다. 이들 리간드를 Cu(II)이온과 반응시켜 세자리 Schiff base Cu(II) 착물들을 합성하였다. 리간드와 그 착물들의 구조와 특성을 원소분석, $^1H$-NMR, IR, UV-vis 분광법과 열 무게 분석법으로 알아보았다. Schiff base 리간드와 Cu(II)의 몰비는 1:1로 결합하며 Cu(II)착물들은 1 분자의 수화물이 배위된 4배위의 평면 사각형 구조임을 알았다. 지지전해질로서 0.1M TBAP를 포함한 DMSO 용액에서 순환 전압전류법과 미분 펄스 전압전류법으로 세자리 Schiff base 리간드와 이들의 Cu(II) 착물들의 전기 화학적인 산화 환원 과정을 알아보았다. 세자리 Schiff base 리간드들의 전기 화학적 환원은 확산 지배적이고 비가역적으로 진행되었다. Cu(II) 착물들의 전기화학적 환원과정은 1단계 1전자 반응으로 모두 확산 지배적이고 준가역적으로 진행되었다. Cu(II)착물들의 환원전위는 [Cu(II)(HNIPC)($H_2O$)]>[Cu(II)(HNIP)($H_2O$)]>[Cu(II)(SIP)($H_2O$)]>[Cu(II)(SIPC)($H_2O$)] 순으로 양전위 방향으로 이동하였다.

• 한국환경보건학회지
• /
• 제33권2호
• /
• pp.150-157
• /
• 2007

The chemical and photochemical decolorization of Rhodamine B (RhB) in water has been carried out by Fenton, Fenton-like and photo-Fenton-like process. The effect of applied $H_2O_2,\;Fe^{2+}$ dosage (Fenton process), $H_2O_2,\;Fe^{\circ}$ dosage (Fenton-like and photo-Fenton-like process), UV light power (photo-Fenton-like process) pH (all processes) have been studied. The results obtained showed that more than 98% of color removal was obtained for the RhB solutions in every process. However, Fenton-like process was not suitable for the color removal of RhB because Fenton-like process was required much more reagents than Fenton and photo-Fenton-like process. The Fenton and photo-Fenton-like process showed similar reagents need. Optimum pH for three processes in this study is about pH 3. The relative order of sensitivity for pH of each process was: Fenton-like > photo-Fenton-like > Fenton.

• 대한화학회지
• /
• 제42권4호
• /
• pp.422-431
• /
• 1998

Salicyladehyde와 2-hydroxy-1-naphthaldehyde를 2-aminophenol과 2-amino-p-cresol에 반응시켜 세자리 Schiff base 리간드$(SIPH_2,\;SIPCH_2,\;HNIPH_2,\; HNIPCH_2)$들을 합성하였으며 이들 리간드를 Co(II) 이온과 반응시켜 세자리 Schiff base Co(II) 착물들을 합성하였다. 리간드와 착물들의 구조와 특성을 원소분석, $^1H$-NMR, IR, UV-vis 분광법과 열 무게 분석법으로 예측하였다. Co(II) 착물들은 Schiff base 리간드와 금속(II)의 몰비가 1:1로 결합하였으며, 3분자의 수화물이 배위된 6배위 착물 구조임을 알았다.지지 전해질로서 0.1M TBAP를 포함한 DMSO 용액에서 순환 전압전류법으로 세자리 Schiff base 리간드와 이들의 Co(II) 착물들의 전기 화학적인 산화·환원 과정을 알아보았다. 리간드들의 전기 화학적 환원은 확산 지배적이고 비가역적으로 진행되었으며 Co(II) 착물의 전기 화학적 환원과정은 2단계의 1전자 반응으로 확산 지배적이고 비가역적으로 진행되었다. Co(II) 착물들의 환원전위는 [Co(II)$(HNIPC)(H_2O)_3$]>[Co(II)$(HNIP)(H_2O)_3$]>[Co(II)$(SIPC)(H_2O)_3$]>[Co(II)$(SIP)(H_2O)_3] 순으로 약간 양전위 방향으로 이동하였으나 리간드의 영향은 크게 받지 않았다.

• 상하수도학회지
• /
• 제27권1호
• /
• pp.31-38
• /
• 2013

The degradation of 4-chlorophenol(4-CP) by various AOPs(Advanced Oxidation Processes) with continuous feeding of $H_2O_2$, including the ultraviolet/hydrogen peroxide, the Fenton and the photo-Fenton process has been investigated. The photo-Fenton process showed the highest removal efficiency for degradation of 4-chlorophenol than those of other AOPs including the Fenton process and the combined UV process with continuous feeding of $H_2O_2$. In the photo-Fenton process, the optimal experimental condition for 4-CP degradation was obtained at pH 3. Also the 4-CP removal efficiency increased with decreasing of the initial 4-CP concentration. 4-chlorocatechol and 4-chlororesorcinol were identified as photo-Fenton reaction intermediates, and the degradation pathways of 4-CP in the aqueous phase during the photo-Fenton reaction were proposed.

• 한국세라믹학회지
• /
• 제56권1호
• /
• pp.98-103
• /
• 2019

Optical filters to control light wavelength of displays or cameras are fabricated by multi-layer stacking process of low and high index thin films. The process of multi-layer stacking of thin films has received much attention as an optimal process for effective manufacturing in the optical filter industry. However, multi-layer processing has disadvantages of complicated thin film process, and difficulty of precise control of film morphology and material selection, all of which are critical for transmittance and coloring effect on filters. In this study, the composite $TiO_2$, which can be used to control of UV absorption, coated on nano hollow silica sol, was synthesized as a coating material for optical filters. Furthermore, systematic analysis of the process parameters during the chemical reaction, and of the structural properties of the coating solutions was performed using SEM, TEM, XRD and photo spectrometry. From the structural analysis, we found that the 85 nm nano hollow silica with 2.5 nm $TiO_2$ shell formation was successfully synthesized at proper pH control and titanium butoxide content. Photo luminescence characteristics, excited by UV irradiation, show that stable absorption of 350 nm-light, correlated with a 3.54 eV band gap, existed for the $TiO_2$ shell-nano hollow silica reacted with 8.8 mole titanium butoxide solution. Transmittance observed on substrate of the $TiO_2$ shell-nano hollow silica showed effective absorption of 200-300 nm UV light without deterioration of visible light transparency.

• Advances in environmental research
• /
• 제9권3호
• /
• pp.191-214
• /
• 2020

The rise in population and industrialization accounts for the generation of a huge amount of wastewaters. The treatment of this wastewater is obligatory to safeguard the environment and various life forms. Conventional methods for high strength wastewater treatment coming out to be ineffective. Advanced oxidation processes (AOPs) for such wastewater treatment proved to be very effective particularly for the removal of various refractory compounds present in the wastewater. Ozone based AOPs with its high oxidizing power and excellent disinfectant properties is considered to be an attractive choice for the elimination of a large spectrum of refractory compounds. Furthermore, it enhances the biodegradability of wastewaters after treatment which favors subsequent biological treatments. In this review, a detailed overview of the AOPs (like the Fenton process, photocatalysis, Electrochemical oxidation, wet air oxidation, and Supercritical water oxidation process) has been discussed explicitly focusing on ozone-based AOPs (like O₃, O₃/H₂O₂, O₃/UV, Ozone/Activated carbon process, Ozone/Ultrasound process, O₃/UV/H₂O₂ process). This review also comprises the involved mechanisms and applications of various ozone-based AOPs for effective municipal/industrial wastewaters and landfill leachate treatment. Process limitations and rough economical analysis were also introduced. The conclusive remarks with future research directions also underlined. It was found that ozonation in combination with other effective AOPs and biological methods enhances treatment efficacies. This review will serve as a reference document for the researchers working in the AOPs field particularly focusing on ozone-based AOPs for wastewater treatment and management systems.

• Advances in environmental research
• /
• 제3권1호
• /
• pp.11-28
• /
• 2014

Advanced oxidation processes using UV and catalysts like $TiO_2$ and ZnO have been recently applied for the photocatalytic degradation of MTBE in water. Attempts have been made to replace the UV radiation by the solar spectrum. This review intends to shed more light on the work that has been done so far in this area of research. The information provided will help in crystallizing the ideas required to shift the trend from UV photocatalysis to sunlight photocatalysis. The careful optimization of the reaction parameters and the type of the dopant employed are greatly responsible for any enhancement in the degradation process. The advantage of shifting from UV photocatalysts to visible light photocatalysts can be observed when catalysts like $TiO_2$ and ZnO are doped with suitable metals. Therefore, it is expected that in the near future, the visible light photocatalysis will be the main technique applied for the remediation of water contaminated with MTBE.