• Nuclear Engineering and Technology
• /
• 제34권5호
• /
• pp.433-435
• /
• 2002

The relation between sintered densities and porosities in UO$_2$ pellets is investigated. The open porosity decreases linearly up to about 95% T.D.,(theoretical density) as the sintered density increases whereas, above 96% T.D., sintered UO$_2$ pellets do not have any open pores. The fraction of open porosity to the total porosity also decreases linearly as the sintered density increases, though the slope is lower than that of open porosity and, above 95% T.D., the fraction decreases rapidly to approach a zero.

• Nuclear Engineering and Technology
• /
• 제41권4호
• /
• pp.493-520
• /
• 2009

During the last four decades, 16 Pressurized Water Reactors (PWR) and 4 Pressurized Heavy Water Reactors (PHWR) have been constructed and operated in Korea, and nuclear fuel technology has been developed to a self-reliant state. At first, the PWR fuel design and manufacturing technology was acquired through international cooperation with a foreign partner. Then, the PWR fuel R&D by Korea Atomic Energy Research Institute (KAERI) has improved fuel technology to a self-reliant state in terms of fuel elements, which includes a new cladding material, a large-grained $UO_2$ pellet, a high performance spacer grid, a fuel rod performance code, and fuel assembly test facility. The MOX fuel performance analysis code was developed and validated using the in-reactor test data. MOX fuel test rods were fabricated and their irradiation test was completed by an international program. At the same time, the PWR fuel development by Korea Nuclear Fuel (KNF) has produced new fuel assemblies such as PLUS7 and ACE7. During this process, the design and test technology of fuel assemblies was developed to a self-reliant state. The PHWR fuel manufacturing technology was developed and manufacturing facility was set up by KAERI, independently from the foreign technology. Then, the advanced PHWR fuel, CANFLEX(CANDU Flexible Fuelling), was developed, and an irradiation test was completed in a PHWR. The development of the CANFLEX fuel included a new design of fuel rods and bundles.. The nuclear fuel technology in Korea has been steadily developed in many national R&D programs, and this advanced fuel technology is expected to contribute to a worldwide nuclear renaissance that can create solutions to global warming.

• Nuclear Engineering and Technology
• /
• 제49권3호
• /
• pp.541-548
• /
• 2017

Uranium metal used for fabrication of fuel for research reactors in India is generally produced by magnesio-thermic reduction of $UF_4$. Performance of magnesio-thermic reaction and recovery and quality of uranium largely depends on properties of $UF_4$. As ammonium diuranate (ADU) is first product in powder form in the process flow-sheet, properties of $UF_4$ depend on properties of ADU. ADU is generally produced from uranyl nitrate solution (UNS) for natural uranium metal production and from uranyl fluoride solution (UFS) for low enriched uranium metal production. In present paper, ADU has been produced via both the routes. Variation of uranium recovery and crystal structure and composition of ADU with progress in precipitation reaction has been studied with special attention on first appearance of the precipitate Further, ADU produced by two routes have been calcined to $UO_3$, then reduced to $UO_2$ and hydroflorinated to $UF_4$. Effect of two different process routes of ADU precipitation on the characteristics of ADU, $UO_3$, $UO_2$ and $UF_4$ were studied here.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.236-239
• /
• 2003

The spent fuel slitting device is an equipment developed in order to feed UO$_2$pellet to the dry pulverizing/mixing device. In this study, we have compared and analyzed the handling method of the slitting and that of the pellet and hull, processing time, separating time for 20kgHM, the number of blades, on the existing slitting device using in DUPIC, and spent fuel management technology research and test facility. Also, we have compared and analyzed about an advantage and weak point, designing and producing, processing, establishment, operation, maintenance about the vertical and horizontal slitting device. Based on these results, we have developed the vertical slitting device. By using the results, we have enhanced the slitting processing time(over 40%)in comparison with DUPIC device, and it will is effectively applied to available data for designing and producing of the hot test facility.

• Nuclear Engineering and Technology
• /
• 제31권5호
• /
• pp.455-464
• /
• 1999

The effect of TiO$_2$ on the sintering behavior of mixed UO$_2$-U$_3$O$_{8}$ Powder compacts has been investigated using the U$_{3}$O$_{8}$ powder made tv oxidation of defective UO$_{2}$ pellets. Without TiO$_2$, UO$_2$ pellet density is inversely proportional to U$_3$O$_{8}$ content and is below 94 %TD in the U$_3$O$_{8}$ range above 15 wt%. Using more than 0.1 wt % TiO$_2$, however, the density decreases slightly with U$_3$O$_{8}$ content and thus is higher than about 94% TD in the whole range of U$_3$O$_{8}$ content. The grain sizes of UO$_2$ pellets with more than 0.1 wt % TiO$_2$are larger than about 30${\mu}{\textrm}{m}$. Therefore, the U$_3$O$_{8}$ Powder can be reused without any restriction on its amount in UO$_2$ pellet fabrication by sintering the mixed UO$_2$-U$_3$O$_{8}$ compact with the aid of TiO$_2$. Mechanisms for densification and grain growth are proposed and discussed, based on a dilatometry study and an examination of microstructure. microstructure.

• 에너지공학
• /
• 제13권4호
• /
• pp.259-266
• /
• 2004

세라믹핵연료의 비열기구는 격자 진동 비열, 팽창 비열, 전도전자 및 결함비열 그리고 과잉비열로 구성된다. 비열을 표현하는 모델은 정압비열 항과 팽창비열 항 그리고 결함비열 항으로 구성된다. 본 연구에서는 세라믹 핵연료의 실험자료 또는 발표된 자료들을 종합 분석하였으며, 가장 적합한 모델을 추천하였다. $UO_2$, (U, Pu)혼합핵연료 및 사용후 핵연료의 비열 자료들이 분석되었다. 사용 후 핵연료의 경우 모의 핵연료의 비열로 대신하였다.

• Nuclear Engineering and Technology
• /
• 제34권4호
• /
• pp.344-357
• /
• 2002

The present paper reports spontaneous steam explosions observed in fuel coolant interaction experiments using prototypic reactor materials. Pure ZrO$_2$ and a mixture of UO$_2$ and ZrO$_2$ are used. A high temperature molten material in the form of a jet is poured into a subcooled water pool located in a pressure vessel. An induction skull melting technique is used for the melting of the reactor material. In both tests using pure ZrO$_2$ and a mixture of UO$_2$ and ZrO$_2$, either a quenching or a spontaneous steam explosion was observed. The morphology of debris and pressure profile clearly indicate the differences between the qunching cases and explosion cases. The dynamic pressure. dynamic impulse, water temperature, melt temperature, and static pressure Inside the containment chamber were measured . As the spontaneous steam explosion for the reactor material is firstly observed in the present experiments, the results of present experiments could be a siginificant step forward the understanding the explosion of the reactor material.

• 방사성폐기물학회지
• /
• 제4권3호
• /
• pp.255-263
• /
• 2006

$UO_2$ 펠릿 20 kg HM/batch용 분말화 장치는 차세대관리 공정의 금속전환로 안으로 균질화된 분말을 공급하기 위하여 $UO_2$ 펠릿을 산화하여 $U_3O_8$으로 분말화하는 장치이다. 본 연구에는 $UO_2$ 펠릿 20 kg HM/batch용 분말화 장치 설계모델을 제시하고, 실증용 분말화 장치를 제작하여 검증실험을 수행한다. 분말화 장치 설계모델은 내부구조, 성능, 가열로 위치와 크기 등이 고려된다. 실험 방법은 $UO_2$ 펠릿 20 kg HM/batch용 분말화 장치 설계 모델에 따라 기존의 3단 메시 분말화 장치를 이용하여 분말의 메시 투과시험과 온도변화 특성 실험을 하여 장치 내부구조를 결정한다. $UO_2$ 펠릿 20 kg HM/batch의 산화 반응도 실험과 가열로 위치별 온도 분포를 측정하고 장치의 성능과 가열로의 영 역 위치를 결정한다. 장치 크기를 결정하기 위하여 산화전의 20kg의 $UO_2$ 펠릿과 산화후의 $U_3O_8$ 부피를 측정한다. 이상의 결과를 토대로 실증용 분말화 장치를 설계. 제작하고, 검증을 위하여 산화도, 분말특성 및 분석 등을 수행하였다. 산화반응 실험결과 에서 기존장치에 비하여 분말의 메시 투과율이 향상되었으며, 기존의 3단 메시 장치의 $UO_2$ 펠릿산화시간이 13시간 소요된 것에 비하여 8시간으로 단축되었다. $U_3O_8$ 분말 특성 분석결과, 평균 입도가 $40{\mu}m$이었다. 제작된 $UO_2$ 펠릿 20 kg HM/batch용 분말화 장치 성능과 설계모델 예측 값은 대체로 잘 일치되었다.

• Nuclear Engineering and Technology
• /
• 제23권1호
• /
• pp.49-55
• /
• 1991

AUC공정으로 제조된 $UO_2$분말을 사용하여 소결체를 제조하여 미세 조직과 기공특성에 대하여 시험하였다. 개기공은 소결밀도 증가에 따라서 감소하였으며, 소결밀도 10.45 g/㎤ 이상에서는 거의 소멸하였다. 3$\mu$m보다 작은 크기의 둥근 기공이 모든 밀도에서 나타났고 낮은 밀도에서는 이것외에도 긴 기공이 관찰되었다. 같은 크기의 기공일지라도 밀도가 낮아지면 기공이 더욱 길게 나타났다. 기공크기에 따른 기공 면적의 분포는 mono 모우드이고, 2~3$\mu$m 기공크기에서 최대치를 보이는 분포를 보였다. 또한 밀도가 감소할수록 큰 기공에 관련된 면적이 증가하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(3)
• /
• pp.423-428
• /
• 1996

The feasibility study on burning Am-241, 243 and Cm-244 nuclides in a conventional PWR (Pressurized Water Reactor) was carried out by using the TRIFON code that was developed by the Institute of Theoretical and Experimental Physics in Russia in 1992. TRIFON code uses updated ABBN Russian nuclear cross section library. The reference reactor is the Korea nuclear power plant unit 8 (YGN 2). The burning effect of Am-241, 243 and Cm-244 nuclides was studied with UO$_2$(3.5 w/o)fuel assembly and MOX (4.44 w/o) fuel assembly. The loaded mass ratio of Am-241, 243 and Cm-244 nuclides was obtained from the mass ratio of Am-241, 243 and Cm-244 nuclides in 10 year cooling spent fuel with average discharge burnup of 33 GWD/MTU. The effective transmutation rates of Am-241, 243 and Cm-244 nuclides in UO$_2$ fuel assembly were found to be higher than those in MOX fuel assembly. The result from TRIFON code was compared to that from CASMO-3/NEM-3D code system. For more reliable calculation of transmutation for MA(Minor Actinides) more sophisticated decay chain scheme of MA should be investigated and nuclear cross section library of MA should be considerably improved.